* [PATCH v5 0/3] arm: npcm: add basic support for Nuvoton BMCs
@ 2017-09-09 1:53 Brendan Higgins
2017-09-09 1:53 ` [PATCH v5 1/3] " Brendan Higgins
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Brendan Higgins @ 2017-09-09 1:53 UTC (permalink / raw)
To: linux-arm-kernel
Addressed comments from:
- kbuild robot: https://www.spinics.net/lists/arm-kernel/msg605356.html
- kbuild robot: https://www.spinics.net/lists/arm-kernel/msg605325.html
Changes since previous update:
- Addressed some minor issues caught by build bot, no structural changes.
- Changes status of NPCM MAINTAINERS entry to Supported since Avi and Tomer
are paid to do this.
- No changes to device tree since v4
Changes have been tested on the NPCM750 evaluation board.
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v5 1/3] arm: npcm: add basic support for Nuvoton BMCs 2017-09-09 1:53 [PATCH v5 0/3] arm: npcm: add basic support for Nuvoton BMCs Brendan Higgins @ 2017-09-09 1:53 ` Brendan Higgins 2017-09-10 8:36 ` Tomer Maimon 2017-09-09 1:53 ` [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree Brendan Higgins 2017-09-09 1:53 ` [PATCH v5 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture Brendan Higgins 2 siblings, 1 reply; 7+ messages in thread From: Brendan Higgins @ 2017-09-09 1:53 UTC (permalink / raw) To: linux-arm-kernel Adds basic support for the Nuvoton NPCM750 BMC. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> --- arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/mach-npcm/Kconfig | 48 ++++++++++++++++++++++++ arch/arm/mach-npcm/Makefile | 3 ++ arch/arm/mach-npcm/headsmp.S | 17 +++++++++ arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++ arch/arm/mach-npcm/platsmp.c | 88 ++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 193 insertions(+) create mode 100644 arch/arm/mach-npcm/Kconfig create mode 100644 arch/arm/mach-npcm/Makefile create mode 100644 arch/arm/mach-npcm/headsmp.S create mode 100644 arch/arm/mach-npcm/npcm7xx.c create mode 100644 arch/arm/mach-npcm/platsmp.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 61a0cb15067e..05543f1cfbde 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/mach-npcm/Kconfig" + source "arch/arm/mach-nspire/Kconfig" source "arch/arm/plat-omap/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47d3a1ab08d2..60ca50c7d762 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik +machine-$(CONFIG_ARCH_NPCM) += npcm machine-$(CONFIG_ARCH_NSPIRE) += nspire machine-$(CONFIG_ARCH_OXNAS) += oxnas machine-$(CONFIG_ARCH_OMAP1) += omap1 diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig new file mode 100644 index 000000000000..21dfa8ce828f --- /dev/null +++ b/arch/arm/mach-npcm/Kconfig @@ -0,0 +1,48 @@ +menuconfig ARCH_NPCM + bool "Nuvoton NPCM Architecture" + select ARCH_REQUIRE_GPIOLIB + select USE_OF + select PINCTRL + select PINCTRL_NPCM7XX + +if ARCH_NPCM + +comment "NPCMX50 CPU type" + +config CPU_NPCM750 + depends on ARCH_NPCM && ARCH_MULTI_V7 + bool "Support for NPCM750 BMC CPU (Poleg)" + select CACHE_L2X0 + select CPU_V7 + select ARM_GIC + select HAVE_SMP + select SMP + select SMP_ON_UP + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select ARM_ERRATA_720789 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 + select ARM_ERRATA_794072 + select PL310_ERRATA_588369 + select PL310_ERRATA_727915 + select USB_EHCI_ROOT_HUB_TT + select USB_ARCH_HAS_HCD + select USB_ARCH_HAS_EHCI + select USB_EHCI_HCD + select USB_ARCH_HAS_OHCI + select USB_OHCI_HCD + select USB + select FIQ + select CPU_USE_DOMAINS + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select COMMON_CLK if OF + select NPCM750_TIMER + select MFD_SYSCON + help + Support for NPCM750 BMC CPU (Poleg). + + Nuvoton NPCM750 BMC based on the Cortex A9. + +endif diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile new file mode 100644 index 000000000000..78416055b854 --- /dev/null +++ b/arch/arm/mach-npcm/Makefile @@ -0,0 +1,3 @@ +AFLAGS_headsmp.o += -march=armv7-a + +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S new file mode 100644 index 000000000000..9fccbbd49ed4 --- /dev/null +++ b/arch/arm/mach-npcm/headsmp.S @@ -0,0 +1,17 @@ +/* + * Copyright 2017 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> + +ENTRY(npcm7xx_secondary_startup) + safe_svcmode_maskall r0 + + b secondary_startup +ENDPROC(npcm7xx_secondary_startup) diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c new file mode 100644 index 000000000000..132e9d587857 --- /dev/null +++ b/arch/arm/mach-npcm/npcm7xx.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2017 Nuvoton Technology corporation. + * Copyright 2017 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> +#include <asm/hardware/cache-l2x0.h> + +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \ + L310_AUX_CTRL_DATA_PREFETCH | \ + L310_AUX_CTRL_NS_LOCKDOWN | \ + L310_AUX_CTRL_CACHE_REPLACE_RR | \ + L2C_AUX_CTRL_SHARED_OVERRIDE | \ + L310_AUX_CTRL_FULL_LINE_ZERO) + +static const char *const npcm7xx_dt_match[] = { + "nuvoton,npcm750", + NULL +}; + +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family") + .atag_offset = 0x100, + .dt_compat = npcm7xx_dt_match, + .l2c_aux_val = NPCM7XX_AUX_VAL, + .l2c_aux_mask = ~NPCM7XX_AUX_VAL, +MACHINE_END diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c new file mode 100644 index 000000000000..450e83c3c531 --- /dev/null +++ b/arch/arm/mach-npcm/platsmp.c @@ -0,0 +1,88 @@ +/* + * Copyright 2017 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) "PLATSMP: " fmt + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <asm/cacheflush.h> +#include <asm/smp.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#define NPCM7XX_SCRPAD_REG 0x13c + +extern void npcm7xx_secondary_startup(void); + +static int npcm7xx_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + struct device_node *gcr_np; + void __iomem *gcr_base; + int ret = 0; + + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr"); + if (!gcr_np) { + pr_err("no gcr device node\n"); + ret = -EFAULT; + goto out; + } + gcr_base = of_iomap(gcr_np, 0); + if (!gcr_base) { + pr_err("could not iomap gcr at: 0x%p\n", gcr_base); + ret = -EFAULT; + goto out; + } + + /* give boot ROM kernel start address. */ + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base + + NPCM7XX_SCRPAD_REG); + /* make sure npcm7xx_secondary_startup is seen by all observers. */ + smp_wmb(); + dsb_sev(); + /* make sure write buffer is drained */ + mb(); + + iounmap(gcr_base); +out: + return ret; +} + +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *scu_np; + void __iomem *scu_base; + + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!scu_np) { + pr_err("no scu device node\n"); + return; + } + scu_base = of_iomap(scu_np, 0); + if (!scu_base) { + pr_err("could not iomap scu at: 0x%p\n", scu_base); + return; + } + + scu_enable(scu_base); + + iounmap(scu_base); +} + +static struct smp_operations npcm7xx_smp_ops __initdata = { + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus, + .smp_boot_secondary = npcm7xx_smp_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops); -- 2.14.1.581.gf28d330327-goog ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 1/3] arm: npcm: add basic support for Nuvoton BMCs 2017-09-09 1:53 ` [PATCH v5 1/3] " Brendan Higgins @ 2017-09-10 8:36 ` Tomer Maimon 0 siblings, 0 replies; 7+ messages in thread From: Tomer Maimon @ 2017-09-10 8:36 UTC (permalink / raw) To: linux-arm-kernel On 9 September 2017 at 04:53, Brendan Higgins <brendanhiggins@google.com> wrote: > Adds basic support for the Nuvoton NPCM750 BMC. > > Signed-off-by: Brendan Higgins <brendanhiggins@google.com> > --- > arch/arm/Kconfig | 2 + > arch/arm/Makefile | 1 + > arch/arm/mach-npcm/Kconfig | 48 ++++++++++++++++++++++++ > arch/arm/mach-npcm/Makefile | 3 ++ > arch/arm/mach-npcm/headsmp.S | 17 +++++++++ > arch/arm/mach-npcm/npcm7xx.c | 34 +++++++++++++++++ > arch/arm/mach-npcm/platsmp.c | 88 ++++++++++++++++++++++++++++++++++++++++++++ > 7 files changed, 193 insertions(+) > create mode 100644 arch/arm/mach-npcm/Kconfig > create mode 100644 arch/arm/mach-npcm/Makefile > create mode 100644 arch/arm/mach-npcm/headsmp.S > create mode 100644 arch/arm/mach-npcm/npcm7xx.c > create mode 100644 arch/arm/mach-npcm/platsmp.c > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 61a0cb15067e..05543f1cfbde 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -782,6 +782,8 @@ source "arch/arm/mach-netx/Kconfig" > > source "arch/arm/mach-nomadik/Kconfig" > > +source "arch/arm/mach-npcm/Kconfig" > + > source "arch/arm/mach-nspire/Kconfig" > > source "arch/arm/plat-omap/Kconfig" > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 47d3a1ab08d2..60ca50c7d762 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -191,6 +191,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek > machine-$(CONFIG_ARCH_MXS) += mxs > machine-$(CONFIG_ARCH_NETX) += netx > machine-$(CONFIG_ARCH_NOMADIK) += nomadik > +machine-$(CONFIG_ARCH_NPCM) += npcm > machine-$(CONFIG_ARCH_NSPIRE) += nspire > machine-$(CONFIG_ARCH_OXNAS) += oxnas > machine-$(CONFIG_ARCH_OMAP1) += omap1 > diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig > new file mode 100644 > index 000000000000..21dfa8ce828f > --- /dev/null > +++ b/arch/arm/mach-npcm/Kconfig > @@ -0,0 +1,48 @@ > +menuconfig ARCH_NPCM > + bool "Nuvoton NPCM Architecture" > + select ARCH_REQUIRE_GPIOLIB > + select USE_OF > + select PINCTRL > + select PINCTRL_NPCM7XX > + > +if ARCH_NPCM > + > +comment "NPCMX50 CPU type" > + > +config CPU_NPCM750 > + depends on ARCH_NPCM && ARCH_MULTI_V7 > + bool "Support for NPCM750 BMC CPU (Poleg)" > + select CACHE_L2X0 > + select CPU_V7 > + select ARM_GIC > + select HAVE_SMP > + select SMP > + select SMP_ON_UP > + select HAVE_ARM_SCU > + select HAVE_ARM_TWD if SMP > + select ARM_ERRATA_720789 > + select ARM_ERRATA_754322 > + select ARM_ERRATA_764369 > + select ARM_ERRATA_794072 > + select PL310_ERRATA_588369 > + select PL310_ERRATA_727915 > + select USB_EHCI_ROOT_HUB_TT > + select USB_ARCH_HAS_HCD > + select USB_ARCH_HAS_EHCI > + select USB_EHCI_HCD > + select USB_ARCH_HAS_OHCI > + select USB_OHCI_HCD > + select USB > + select FIQ > + select CPU_USE_DOMAINS > + select GENERIC_CLOCKEVENTS > + select CLKDEV_LOOKUP > + select COMMON_CLK if OF > + select NPCM750_TIMER > + select MFD_SYSCON > + help > + Support for NPCM750 BMC CPU (Poleg). > + > + Nuvoton NPCM750 BMC based on the Cortex A9. > + > +endif > diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile > new file mode 100644 > index 000000000000..78416055b854 > --- /dev/null > +++ b/arch/arm/mach-npcm/Makefile > @@ -0,0 +1,3 @@ > +AFLAGS_headsmp.o += -march=armv7-a > + > +obj-$(CONFIG_CPU_NPCM750) += npcm7xx.o platsmp.o headsmp.o > diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S > new file mode 100644 > index 000000000000..9fccbbd49ed4 > --- /dev/null > +++ b/arch/arm/mach-npcm/headsmp.S > @@ -0,0 +1,17 @@ > +/* > + * Copyright 2017 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/linkage.h> > +#include <linux/init.h> > +#include <asm/assembler.h> > + > +ENTRY(npcm7xx_secondary_startup) > + safe_svcmode_maskall r0 > + > + b secondary_startup > +ENDPROC(npcm7xx_secondary_startup) > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c > new file mode 100644 > index 000000000000..132e9d587857 > --- /dev/null > +++ b/arch/arm/mach-npcm/npcm7xx.c > @@ -0,0 +1,34 @@ > +/* > + * Copyright (c) 2017 Nuvoton Technology corporation. > + * Copyright 2017 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/kernel.h> > +#include <linux/types.h> > +#include <asm/mach/arch.h> > +#include <asm/mach-types.h> > +#include <asm/mach/map.h> > +#include <asm/hardware/cache-l2x0.h> > + > +#define NPCM7XX_AUX_VAL (L310_AUX_CTRL_INSTR_PREFETCH | \ > + L310_AUX_CTRL_DATA_PREFETCH | \ > + L310_AUX_CTRL_NS_LOCKDOWN | \ > + L310_AUX_CTRL_CACHE_REPLACE_RR | \ > + L2C_AUX_CTRL_SHARED_OVERRIDE | \ > + L310_AUX_CTRL_FULL_LINE_ZERO) > + > +static const char *const npcm7xx_dt_match[] = { > + "nuvoton,npcm750", > + NULL > +}; > + > +DT_MACHINE_START(NPCM7XX_DT, "NPCMX50 Chip family") > + .atag_offset = 0x100, > + .dt_compat = npcm7xx_dt_match, > + .l2c_aux_val = NPCM7XX_AUX_VAL, > + .l2c_aux_mask = ~NPCM7XX_AUX_VAL, > +MACHINE_END > diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c > new file mode 100644 > index 000000000000..450e83c3c531 > --- /dev/null > +++ b/arch/arm/mach-npcm/platsmp.c > @@ -0,0 +1,88 @@ > +/* > + * Copyright 2017 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define pr_fmt(fmt) "PLATSMP: " fmt > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/smp.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_platform.h> > +#include <linux/of_address.h> > +#include <asm/cacheflush.h> > +#include <asm/smp.h> > +#include <asm/smp_plat.h> > +#include <asm/smp_scu.h> > + > +#define NPCM7XX_SCRPAD_REG 0x13c > + > +extern void npcm7xx_secondary_startup(void); > + > +static int npcm7xx_smp_boot_secondary(unsigned int cpu, > + struct task_struct *idle) > +{ > + struct device_node *gcr_np; > + void __iomem *gcr_base; > + int ret = 0; > + > + gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr"); > + if (!gcr_np) { > + pr_err("no gcr device node\n"); > + ret = -EFAULT; > + goto out; > + } > + gcr_base = of_iomap(gcr_np, 0); > + if (!gcr_base) { > + pr_err("could not iomap gcr at: 0x%p\n", gcr_base); > + ret = -EFAULT; > + goto out; > + } > + > + /* give boot ROM kernel start address. */ > + iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base + > + NPCM7XX_SCRPAD_REG); > + /* make sure npcm7xx_secondary_startup is seen by all observers. */ > + smp_wmb(); > + dsb_sev(); > + /* make sure write buffer is drained */ > + mb(); > + > + iounmap(gcr_base); > +out: > + return ret; > +} > + > +static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus) > +{ > + struct device_node *scu_np; > + void __iomem *scu_base; > + > + scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); > + if (!scu_np) { > + pr_err("no scu device node\n"); > + return; > + } > + scu_base = of_iomap(scu_np, 0); > + if (!scu_base) { > + pr_err("could not iomap scu at: 0x%p\n", scu_base); > + return; > + } > + > + scu_enable(scu_base); > + > + iounmap(scu_base); > +} > + > +static struct smp_operations npcm7xx_smp_ops __initdata = { > + .smp_prepare_cpus = npcm7xx_smp_prepare_cpus, > + .smp_boot_secondary = npcm7xx_smp_boot_secondary, > +}; > + > +CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm7xx-smp", &npcm7xx_smp_ops); > -- > 2.14.1.581.gf28d330327-goog > Reviewed-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> Tested-by: Tomer Maimon <tmaimon77@gmail.com> Tested-by: Avi Fishman <avifishman70@gmail.com> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree 2017-09-09 1:53 [PATCH v5 0/3] arm: npcm: add basic support for Nuvoton BMCs Brendan Higgins 2017-09-09 1:53 ` [PATCH v5 1/3] " Brendan Higgins @ 2017-09-09 1:53 ` Brendan Higgins 2017-09-18 19:46 ` Rob Herring 2017-09-09 1:53 ` [PATCH v5 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture Brendan Higgins 2 siblings, 1 reply; 7+ messages in thread From: Brendan Higgins @ 2017-09-09 1:53 UTC (permalink / raw) To: linux-arm-kernel Add a common device tree for all Nuvoton NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg) evaluation board. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Tomer Maimon <tmaimon77@gmail.com> Tested-by: Avi Fishman <avifishman70@gmail.com> --- .../arm/cpu-enable-method/nuvoton,npcm7xx-smp | 42 +++++ .../devicetree/bindings/arm/npcm/npcm.txt | 6 + arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 57 +++++++ arch/arm/boot/dts/nuvoton-npcm750.dtsi | 177 +++++++++++++++++++++ include/dt-bindings/clock/nuvoton,npcm7xx-clks.h | 39 +++++ 5 files changed, 321 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp new file mode 100644 index 000000000000..e81f85b400cf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp @@ -0,0 +1,42 @@ +========================================================= +Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding +========================================================= + +To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be +defined in the "cpus" node. + +Enable method name: "nuvoton,npcm7xx-smp" +Compatible machines: "nuvoton,npcm750" +Compatible CPUs: "arm,cortex-a9" +Related properties: (none) + +Note: +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and +"nuvoton,npcm750-gcr". + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "nuvoton,npcm7xx-smp"; + + cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt new file mode 100644 index 000000000000..2d87d9ecea85 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt @@ -0,0 +1,6 @@ +NPCM Platforms Device Tree Bindings +----------------------------------- +NPCM750 SoC +Required root node properties: + - compatible = "nuvoton,npcm750"; + diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts new file mode 100644 index 000000000000..e54a870d3ee0 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -0,0 +1,57 @@ +/* + * DTS file for all NPCM750 SoCs + * + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 Development Board (Device Tree)"; + compatible = "nuvoton,npcm750"; + + chosen { + stdout-path = &serial3; + bootargs = "earlyprintk=serial,serial3,115200"; + }; + + memory { + reg = <0 0x40000000>; + }; + + cpus { + enable-method = "nuvoton,npcm7xx-smp"; + }; +}; + +&clk { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi new file mode 100644 index 000000000000..bca96b3ae9d3 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi @@ -0,0 +1,177 @@ +/* + * DTSi file for the NPCM750 SoC + * + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk NPCM7XX_CLK_CPU>; + clock-names = "clk_cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + gcr: gcr at f0800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", + "simple-mfd"; + reg = <0xf0800000 0x1000>; + }; + + scu: scu at f03fe000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xf03fe000 0x1000>; + }; + + l2: l2-cache at f03fc000 { + compatible = "arm,pl310-cache"; + reg = <0xf03fc000 0x1000>; + interrupts = <0 21 4>; + cache-unified; + cache-level = <2>; + clocks = <&clk NPCM7XX_CLK_AXI>; + }; + + gic: interrupt-controller at f03ff000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf03ff000 0x1000>, + <0xf03fe100 0x100>; + }; + + clk: clock-controller at f0801000 { + compatible = "nuvoton,npcm750-clk"; + #clock-cells = <1>; + reg = <0xf0801000 0x1000>; + }; + + /* external clock signal rg1refck, supplied by the phy */ + clk-rg1refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + /* external clock signal rg2refck, supplied by the phy */ + clk-rg2refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk-xin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + timer at f03fe600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf03fe600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + timer0: timer at f0000000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <0 32 4>; + reg = <0xf0000000 0x1000>; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; + + watchdog0: watchdog at f0008000 { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <0 47 4>; + reg = <0xf0008000 0x1000>; + status = "disabled"; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; + + watchdog1: watchdog at f0009000 { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <0 48 4>; + reg = <0xf0009000 0x1000>; + status = "disabled"; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; + + watchdog2: watchdog at f000a000 { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <0 49 4>; + reg = <0xf000a000 0x1000>; + status = "disabled"; + clocks = <&clk NPCM7XX_CLK_TIMER>; + }; + + serial0: serial0 at f0001000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0xf0001000 0x1000>; + clocks = <&clk NPCM7XX_CLK_UART_CORE>; + interrupts = <0 2 4>; + status = "disabled"; + }; + + serial1: serial1 at f0002000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0xf0002000 0x1000>; + clocks = <&clk NPCM7XX_CLK_UART_CORE>; + interrupts = <0 3 4>; + status = "disabled"; + }; + + serial2: serial2 at f0003000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0xf0003000 0x1000>; + clocks = <&clk NPCM7XX_CLK_UART_CORE>; + interrupts = <0 4 4>; + status = "disabled"; + }; + + serial3: serial3 at f0004000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0xf0004000 0x1000>; + clocks = <&clk NPCM7XX_CLK_UART_CORE>; + interrupts = <0 5 4>; + status = "disabled"; + }; + }; +}; diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h new file mode 100644 index 000000000000..c69d3bbf7e42 --- /dev/null +++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2016 Nuvoton Technologies, tali.perry at nuvoton.com + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ + +#ifndef _DT_BINDINGS_CLK_NPCM7XX_H +#define _DT_BINDINGS_CLK_NPCM7XX_H + +#define NPCM7XX_CLK_PLL0 0 +#define NPCM7XX_CLK_PLL1 1 +#define NPCM7XX_CLK_PLL2 2 +#define NPCM7XX_CLK_GFX 3 +#define NPCM7XX_CLK_APB1 4 +#define NPCM7XX_CLK_APB2 5 +#define NPCM7XX_CLK_APB3 6 +#define NPCM7XX_CLK_APB4 7 +#define NPCM7XX_CLK_APB5 8 +#define NPCM7XX_CLK_MC 9 +#define NPCM7XX_CLK_CPU 10 +#define NPCM7XX_CLK_SPI0 11 +#define NPCM7XX_CLK_SPI3 12 +#define NPCM7XX_CLK_SPIX 13 +#define NPCM7XX_CLK_UART_CORE 14 +#define NPCM7XX_CLK_TIMER 15 +#define NPCM7XX_CLK_HOST_UART 16 +#define NPCM7XX_CLK_MMC 17 +#define NPCM7XX_CLK_SDHC 18 +#define NPCM7XX_CLK_ADC 19 +#define NPCM7XX_CLK_GFX_MEM 20 +#define NPCM7XX_CLK_USB_BRIDGE 21 +#define NPCM7XX_CLK_AXI 22 +#define NPCM7XX_CLK_AHB 23 +#define NPCM7XX_CLK_EMC 24 +#define NPCM7XX_CLK_GMAC 25 + +#endif -- 2.14.1.581.gf28d330327-goog ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree 2017-09-09 1:53 ` [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree Brendan Higgins @ 2017-09-18 19:46 ` Rob Herring 2017-09-18 20:37 ` Rob Herring 0 siblings, 1 reply; 7+ messages in thread From: Rob Herring @ 2017-09-18 19:46 UTC (permalink / raw) To: linux-arm-kernel On Fri, Sep 08, 2017 at 06:53:07PM -0700, Brendan Higgins wrote: > Add a common device tree for all Nuvoton NPCM750 BMCs and a board > specific device tree for the NPCM750 (Poleg) evaluation board. > > Signed-off-by: Brendan Higgins <brendanhiggins@google.com> > Reviewed-by: Tomer Maimon <tmaimon77@gmail.com> > Reviewed-by: Avi Fishman <avifishman70@gmail.com> > Reviewed-by: Joel Stanley <joel@jms.id.au> > Tested-by: Tomer Maimon <tmaimon77@gmail.com> > Tested-by: Avi Fishman <avifishman70@gmail.com> > --- > .../arm/cpu-enable-method/nuvoton,npcm7xx-smp | 42 +++++ > .../devicetree/bindings/arm/npcm/npcm.txt | 6 + > arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 57 +++++++ > arch/arm/boot/dts/nuvoton-npcm750.dtsi | 177 +++++++++++++++++++++ > include/dt-bindings/clock/nuvoton,npcm7xx-clks.h | 39 +++++ > 5 files changed, 321 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp > create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt > create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts > create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi > create mode 100644 include/dt-bindings/clock/nuvoton,npcm7xx-clks.h > > diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp > new file mode 100644 > index 000000000000..e81f85b400cf > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm7xx-smp > @@ -0,0 +1,42 @@ > +========================================================= > +Secondary CPU enable-method "nuvoton,npcm7xx-smp" binding > +========================================================= > + > +To apply to all CPUs, a single "nuvoton,npcm7xx-smp" enable method should be > +defined in the "cpus" node. > + > +Enable method name: "nuvoton,npcm7xx-smp" > +Compatible machines: "nuvoton,npcm750" > +Compatible CPUs: "arm,cortex-a9" > +Related properties: (none) > + > +Note: > +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and > +"nuvoton,npcm750-gcr". > + > +Example: > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + enable-method = "nuvoton,npcm7xx-smp"; > + > + cpu at 0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + clocks = <&clk NPCM7XX_CLK_CPU>; > + clock-names = "clk_cpu"; > + reg = <0>; > + next-level-cache = <&L2>; > + }; > + > + cpu at 1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + clocks = <&clk NPCM7XX_CLK_CPU>; > + clock-names = "clk_cpu"; > + reg = <1>; > + next-level-cache = <&L2>; > + }; > + }; > + > diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt > new file mode 100644 > index 000000000000..2d87d9ecea85 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt > @@ -0,0 +1,6 @@ > +NPCM Platforms Device Tree Bindings > +----------------------------------- > +NPCM750 SoC > +Required root node properties: > + - compatible = "nuvoton,npcm750"; > + > diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > new file mode 100644 > index 000000000000..e54a870d3ee0 > --- /dev/null > +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts > @@ -0,0 +1,57 @@ > +/* > + * DTS file for all NPCM750 SoCs > + * > + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "nuvoton-npcm750.dtsi" > + > +/ { > + model = "Nuvoton npcm750 Development Board (Device Tree)"; > + compatible = "nuvoton,npcm750"; > + > + chosen { > + stdout-path = &serial3; stdout-path is a path string, not a phandle. > + bootargs = "earlyprintk=serial,serial3,115200"; That's not valid bootargs with mainline. > + }; > + > + memory { > + reg = <0 0x40000000>; > + }; > + > + cpus { > + enable-method = "nuvoton,npcm7xx-smp"; This is not a board specific property. Belongs in the SoC dtsi. > + }; > +}; > + > +&clk { > + status = "okay"; Pretty sure you'd always want the clock controller enabled. > +}; > + > +&watchdog1 { > + status = "okay"; > +}; > + > +&serial0 { > + status = "okay"; > +}; > + > +&serial1 { > + status = "okay"; > +}; > + > +&serial2 { > + status = "okay"; > +}; > + > +&serial3 { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi > new file mode 100644 > index 000000000000..bca96b3ae9d3 > --- /dev/null > +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi > @@ -0,0 +1,177 @@ > +/* > + * DTSi file for the NPCM750 SoC > + * > + * Copyright 2012 Tomer Maimon <tomer.maimon@nuvoton.com> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +#include "skeleton.dtsi" Don't use skeleton.dtsi. We want to remove it. > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/nuvoton,npcm7xx-clks.h> > + > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&gic>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu at 0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + clocks = <&clk NPCM7XX_CLK_CPU>; > + clock-names = "clk_cpu"; > + reg = <0>; > + next-level-cache = <&l2>; > + }; > + > + cpu at 1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + clocks = <&clk NPCM7XX_CLK_CPU>; > + clock-names = "clk_cpu"; > + reg = <1>; > + next-level-cache = <&l2>; > + }; > + }; > + > + gcr: gcr at f0800000 { > + compatible = "nuvoton,npcm750-gcr", "syscon", > + "simple-mfd"; > + reg = <0xf0800000 0x1000>; > + }; > + > + scu: scu at f03fe000 { > + compatible = "arm,cortex-a9-scu"; > + reg = <0xf03fe000 0x1000>; > + }; > + > + l2: l2-cache at f03fc000 { cache-controller at ... > + compatible = "arm,pl310-cache"; > + reg = <0xf03fc000 0x1000>; > + interrupts = <0 21 4>; > + cache-unified; > + cache-level = <2>; > + clocks = <&clk NPCM7XX_CLK_AXI>; > + }; > + > + gic: interrupt-controller at f03ff000 { > + compatible = "arm,cortex-a9-gic"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0xf03ff000 0x1000>, > + <0xf03fe100 0x100>; > + }; > + > + clk: clock-controller at f0801000 { > + compatible = "nuvoton,npcm750-clk"; > + #clock-cells = <1>; > + reg = <0xf0801000 0x1000>; > + }; All these memory mapped peripherals should be under a bus/soc node > + > + /* external clock signal rg1refck, supplied by the phy */ > + clk-rg1refck { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > + > + /* external clock signal rg2refck, supplied by the phy */ > + clk-rg2refck { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > + > + clk-xin { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <50000000>; > + }; > + > + timer at f03fe600 { > + compatible = "arm,cortex-a9-twd-timer"; > + reg = <0xf03fe600 0x20>; > + interrupts = <1 13 0x304>; > + clocks = <&clk NPCM7XX_CLK_TIMER>; > + }; > + > + apb { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + ranges; It's preferred to have actual values here and limit the address range of the bus. > + > + timer0: timer at f0000000 { > + compatible = "nuvoton,npcm750-timer"; > + interrupts = <0 32 4>; > + reg = <0xf0000000 0x1000>; > + clocks = <&clk NPCM7XX_CLK_TIMER>; > + }; > + > + watchdog0: watchdog at f0008000 { > + compatible = "nuvoton,npcm750-wdt"; > + interrupts = <0 47 4>; > + reg = <0xf0008000 0x1000>; > + status = "disabled"; > + clocks = <&clk NPCM7XX_CLK_TIMER>; > + }; > + > + watchdog1: watchdog at f0009000 { > + compatible = "nuvoton,npcm750-wdt"; > + interrupts = <0 48 4>; > + reg = <0xf0009000 0x1000>; > + status = "disabled"; > + clocks = <&clk NPCM7XX_CLK_TIMER>; > + }; > + > + watchdog2: watchdog at f000a000 { > + compatible = "nuvoton,npcm750-wdt"; > + interrupts = <0 49 4>; > + reg = <0xf000a000 0x1000>; > + status = "disabled"; > + clocks = <&clk NPCM7XX_CLK_TIMER>; > + }; > + > + serial0: serial0 at f0001000 { > + compatible = "nuvoton,npcm750-uart"; > + reg = <0xf0001000 0x1000>; > + clocks = <&clk NPCM7XX_CLK_UART_CORE>; > + interrupts = <0 2 4>; > + status = "disabled"; > + }; > + > + serial1: serial1 at f0002000 { > + compatible = "nuvoton,npcm750-uart"; > + reg = <0xf0002000 0x1000>; > + clocks = <&clk NPCM7XX_CLK_UART_CORE>; > + interrupts = <0 3 4>; > + status = "disabled"; > + }; > + > + serial2: serial2 at f0003000 { > + compatible = "nuvoton,npcm750-uart"; > + reg = <0xf0003000 0x1000>; > + clocks = <&clk NPCM7XX_CLK_UART_CORE>; > + interrupts = <0 4 4>; > + status = "disabled"; > + }; > + > + serial3: serial3 at f0004000 { > + compatible = "nuvoton,npcm750-uart"; > + reg = <0xf0004000 0x1000>; > + clocks = <&clk NPCM7XX_CLK_UART_CORE>; > + interrupts = <0 5 4>; > + status = "disabled"; > + }; > + }; > +}; > diff --git a/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h > new file mode 100644 > index 000000000000..c69d3bbf7e42 > --- /dev/null > +++ b/include/dt-bindings/clock/nuvoton,npcm7xx-clks.h > @@ -0,0 +1,39 @@ > +/* > + * Copyright (C) 2016 Nuvoton Technologies, tali.perry at nuvoton.com > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + */ > + > +#ifndef _DT_BINDINGS_CLK_NPCM7XX_H > +#define _DT_BINDINGS_CLK_NPCM7XX_H > + > +#define NPCM7XX_CLK_PLL0 0 > +#define NPCM7XX_CLK_PLL1 1 > +#define NPCM7XX_CLK_PLL2 2 > +#define NPCM7XX_CLK_GFX 3 > +#define NPCM7XX_CLK_APB1 4 > +#define NPCM7XX_CLK_APB2 5 > +#define NPCM7XX_CLK_APB3 6 > +#define NPCM7XX_CLK_APB4 7 > +#define NPCM7XX_CLK_APB5 8 > +#define NPCM7XX_CLK_MC 9 > +#define NPCM7XX_CLK_CPU 10 > +#define NPCM7XX_CLK_SPI0 11 > +#define NPCM7XX_CLK_SPI3 12 > +#define NPCM7XX_CLK_SPIX 13 > +#define NPCM7XX_CLK_UART_CORE 14 > +#define NPCM7XX_CLK_TIMER 15 > +#define NPCM7XX_CLK_HOST_UART 16 > +#define NPCM7XX_CLK_MMC 17 > +#define NPCM7XX_CLK_SDHC 18 > +#define NPCM7XX_CLK_ADC 19 > +#define NPCM7XX_CLK_GFX_MEM 20 > +#define NPCM7XX_CLK_USB_BRIDGE 21 > +#define NPCM7XX_CLK_AXI 22 > +#define NPCM7XX_CLK_AHB 23 > +#define NPCM7XX_CLK_EMC 24 > +#define NPCM7XX_CLK_GMAC 25 > + > +#endif > -- > 2.14.1.581.gf28d330327-goog > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree 2017-09-18 19:46 ` Rob Herring @ 2017-09-18 20:37 ` Rob Herring 0 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2017-09-18 20:37 UTC (permalink / raw) To: linux-arm-kernel On Mon, Sep 18, 2017 at 2:46 PM, Rob Herring <robh@kernel.org> wrote: > On Fri, Sep 08, 2017 at 06:53:07PM -0700, Brendan Higgins wrote: >> Add a common device tree for all Nuvoton NPCM750 BMCs and a board >> specific device tree for the NPCM750 (Poleg) evaluation board. [...] >> +/ { >> + model = "Nuvoton npcm750 Development Board (Device Tree)"; >> + compatible = "nuvoton,npcm750"; >> + >> + chosen { >> + stdout-path = &serial3; > > stdout-path is a path string, not a phandle. Sorry, it's Monday and my brain is not working. This is fine. Rob ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v5 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture 2017-09-09 1:53 [PATCH v5 0/3] arm: npcm: add basic support for Nuvoton BMCs Brendan Higgins 2017-09-09 1:53 ` [PATCH v5 1/3] " Brendan Higgins 2017-09-09 1:53 ` [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree Brendan Higgins @ 2017-09-09 1:53 ` Brendan Higgins 2 siblings, 0 replies; 7+ messages in thread From: Brendan Higgins @ 2017-09-09 1:53 UTC (permalink / raw) To: linux-arm-kernel Add maintainers and reviewers for the Nuvoton NPCM architecture. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> --- MAINTAINERS | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 44cb004c765d..ec0d35384a16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1598,6 +1598,19 @@ F: drivers/pinctrl/nomadik/ F: drivers/i2c/busses/i2c-nomadik.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git +ARM/NUVOTON NPCM ARCHITECTURE +M: Avi Fishman <avifishman70@gmail.com> +M: Tomer Maimon <tmaimon77@gmail.com> +R: Brendan Higgins <brendanhiggins@google.com> +R: Rick Altherr <raltherr@google.com> +L: openbmc at lists.ozlabs.org (moderated for non-subscribers) +S: Supported +F: arch/arm/mach-npcm/ +F: arch/arm/boot/dts/nuvoton-npcm* +F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h +F: drivers/*/*npcm* +F: Documentation/*/*npcm* + ARM/NUVOTON W90X900 ARM ARCHITECTURE M: Wan ZongShun <mcuos.com@gmail.com> L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) -- 2.14.1.581.gf28d330327-goog ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-09-18 20:37 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-09-09 1:53 [PATCH v5 0/3] arm: npcm: add basic support for Nuvoton BMCs Brendan Higgins 2017-09-09 1:53 ` [PATCH v5 1/3] " Brendan Higgins 2017-09-10 8:36 ` Tomer Maimon 2017-09-09 1:53 ` [PATCH v5 2/3] arm: dts: add Nuvoton NPCM750 device tree Brendan Higgins 2017-09-18 19:46 ` Rob Herring 2017-09-18 20:37 ` Rob Herring 2017-09-09 1:53 ` [PATCH v5 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture Brendan Higgins
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).