From: Rob Herring <robh+dt@kernel.org>
To: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
SoC Team <soc@kernel.org>, linux-clk <linux-clk@vger.kernel.org>,
devicetree@vger.kernel.org, Olof Johansson <olof@lixom.net>,
Linus Walleij <linus.walleij@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
linux-samsung-soc <linux-samsung-soc@vger.kernel.org>,
Pankaj Dubey <pankaj.dubey@samsung.com>,
linux-fsd@tesla.com, Arjun K V <arjun.kv@samsung.com>,
Aswani Reddy <aswani.reddy@samsung.com>,
Ajay Kumar <ajaykumar.rs@samsung.com>,
Sriranjani P <sriranjani.p@samsung.com>,
Chandrasekar R <rcsekar@samsung.com>,
Shashank Prashar <s.prashar@samsung.com>
Subject: Re: [PATCH 14/23] arm64: dts: fsd: Add initial device tree support
Date: Thu, 13 Jan 2022 20:45:42 -0600 [thread overview]
Message-ID: <CAL_JsqKDbzy8y61Oj8Ey++atoMn1HYPyDZRc_cJQCe_tfkDGxQ@mail.gmail.com> (raw)
In-Reply-To: <20220113121143.22280-15-alim.akhtar@samsung.com>
On Thu, Jan 13, 2022 at 6:24 AM Alim Akhtar <alim.akhtar@samsung.com> wrote:
>
> Add initial device tree support for "Full Self-Driving" (FSD) SoC
> This SoC contain three clusters of four cortex-a72 CPUs and various
> peripheral IPs.
Please make sure you run this thru 'make dtbs_check'. Fix schema
warnings as much as possible and all dtc warnings. If shared with
Samsung, there's probably a bit still missing. I see several warnings
so I won't bother manually reporting them here.
> Cc: linux-fsd@tesla.com
> Signed-off-by: Arjun K V <arjun.kv@samsung.com>
> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
> Signed-off-by: Shashank Prashar <s.prashar@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
> MAINTAINERS | 8 +
> arch/arm64/Kconfig.platforms | 6 +
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/tesla/Makefile | 3 +
> arch/arm64/boot/dts/tesla/fsd.dts | 140 ++++++
> arch/arm64/boot/dts/tesla/fsd.dtsi | 715 +++++++++++++++++++++++++++++
> 6 files changed, 873 insertions(+)
> create mode 100644 arch/arm64/boot/dts/tesla/Makefile
> create mode 100644 arch/arm64/boot/dts/tesla/fsd.dts
> create mode 100644 arch/arm64/boot/dts/tesla/fsd.dtsi
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fb18ce7168aa..02d56909c5e2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2726,6 +2726,14 @@ S: Maintained
> F: Documentation/devicetree/bindings/media/tegra-cec.txt
> F: drivers/media/cec/platform/tegra/
>
> +ARM/TESLA FSD SoC SUPPORT
> +M: Alim Akhtar <alim.akhtar@samsung.com>
> +M: linux-fsd@tesla.com
> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +L: linux-samsung-soc@vger.kernel.org
> +S: Maintained
> +F: arch/arm64/boot/dts/tesla*
> +
> ARM/TETON BGA MACHINE SUPPORT
> M: "Mark F. Brown" <mark.brown314@gmail.com>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 54e3910e8b9b..bb8a047c2359 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -267,6 +267,12 @@ config ARCH_TEGRA
> help
> This enables support for the NVIDIA Tegra SoC family.
>
> +config ARCH_TESLA_FSD
> + bool "ARMv8 based Tesla platform"
> + select ARCH_EXYNOS
> + help
> + Support for ARMv8 based Tesla platforms.
> +
> config ARCH_SPRD
> bool "Spreadtrum SoC platform"
> help
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 639e01a4d855..1ba04e31a438 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -27,6 +27,7 @@ subdir-y += rockchip
> subdir-y += socionext
> subdir-y += sprd
> subdir-y += synaptics
> +subdir-y += tesla
> subdir-y += ti
> subdir-y += toshiba
> subdir-y += xilinx
> diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
> new file mode 100644
> index 000000000000..a9818cda6b08
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_TESLA_FSD) += \
> + fsd.dtb
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dts b/arch/arm64/boot/dts/tesla/fsd.dts
> new file mode 100644
> index 000000000000..e9bbd3284de9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/fsd.dts
> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: GPL-2.0
Dual license dts files please.
> +/*
> + * Tesla FSD board device tree source
> + *
> + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
> + * https://www.samsung.com
> + * Copyright (c) 2017-2021 Tesla, Inc.
> + * https://www.tesla.com
> + */
> +
> +/dts-v1/;
> +#include "fsd.dtsi"
> +
> +/ {
> + model = "Tesla Full Self-Driving (FSD) SoC";
> + compatible = "tesla,fsd";
> +
> + aliases {
> + serial0 = &serial_0;
> + serial1 = &serial_1;
> + };
> +
> + chosen {
> + stdout-path = &serial_0;
> + linux,initrd-start = <0xE0000000>;
> + linux,initrd-end = <0xE4F00000>;
Bootloaders set these.
> + bootargs = "console=ttySAC0,115200n8
Not needed with stdout-path.
> + earlycon=exynos4210,0x14180000 root=/dev/ram0
earlycon is a debug option.
> + init=/linuxrc";
init and rootfs are user settings.
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x2 0x00000000>;
> + };
> +};
> +
> +&fin_pll {
> + clock-frequency = <24000000>;
> +};
> +
> +&serial_0 {
> + status = "okay";
> +};
> +
> +&serial_1 {
> + status = "okay";
> +};
> +
> +&clock_cmu {
> + status = "okay";
> +};
> +
> +&clock_imem {
> + status = "okay";
> +};
> +
> +&clock_peric {
> + status = "okay";
> +};
> +
> +&smmu_isp {
> + status = "okay";
> +};
> +
> +&clock_fsys0 {
> + status = "okay";
> +};
> +
> +&clock_fsys1 {
> + status = "okay";
> +};
> +
> +&smmu_peric {
> + status = "okay";
> +};
> +
> +&smmu_imem {
> + status = "okay";
> +};
> +
> +&smmu_fsys0 {
> + status = "okay";
> +};
> +
> +&hsi2c_0 {
> + status = "okay";
> +};
> +
> +&hsi2c_1 {
> + status = "okay";
> +};
> +
> +&hsi2c_2 {
> + status = "okay";
> +};
> +
> +&hsi2c_3 {
> + status = "okay";
> +};
> +
> +&hsi2c_4 {
> + status = "okay";
> +};
> +
> +&hsi2c_5 {
> + status = "okay";
> +};
> +
> +&hsi2c_6 {
> + status = "okay";
> +};
> +
> +&hsi2c_7 {
> + status = "okay";
> +};
> +
> +&pwm_0 {
> + status = "okay";
> +};
> +
> +&pwm_1 {
> + status = "okay";
> +};
> +
> +&mdma0 {
> + status = "okay";
> +};
> +
> +&mdma1 {
> + status = "okay";
> +};
> +
> +&pdma0 {
> + status = "okay";
> +};
> +
> +&pdma1 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
> new file mode 100644
> index 000000000000..47cd9f20566e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> @@ -0,0 +1,715 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Tesla Full Self-Driving SoC device tree source
> + *
> + * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
> + * https://www.samsung.com
> + * Copyright (c) 2017-2022 Tesla, Inc.
> + * https://www.tesla.com
> + */
> +
> +#include <dt-bindings/clock/fsd-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "tesla,fsd";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + watchdog0 = &watchdog_0;
> + watchdog1 = &watchdog_1;
> + watchdog2 = &watchdog_2;
> + hsi2c0 = &hsi2c_0;
> + hsi2c1 = &hsi2c_1;
> + hsi2c2 = &hsi2c_2;
> + hsi2c3 = &hsi2c_3;
> + hsi2c4 = &hsi2c_4;
> + hsi2c5 = &hsi2c_5;
> + hsi2c6 = &hsi2c_6;
> + hsi2c7 = &hsi2c_7;
Drop all these non-standard aliases.
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpucl0_0>;
> + };
> + core1 {
> + cpu = <&cpucl0_1>;
> + };
> + core2 {
> + cpu = <&cpucl0_2>;
> + };
> + core3 {
> + cpu = <&cpucl0_3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpucl1_0>;
> + };
> + core1 {
> + cpu = <&cpucl1_1>;
> + };
> + core2 {
> + cpu = <&cpucl1_2>;
> + };
> + core3 {
> + cpu = <&cpucl1_3>;
> + };
> + };
> +
> + cluster2 {
> + core0 {
> + cpu = <&cpucl2_0>;
> + };
> + core1 {
> + cpu = <&cpucl2_1>;
> + };
> + core2 {
> + cpu = <&cpucl2_2>;
> + };
> + core3 {
> + cpu = <&cpucl2_3>;
> + };
> + };
> + };
> +
> + /* Cluster 0 */
> + cpucl0_0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x000>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl0_1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x001>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl0_2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x002>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl0_3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x003>;
> + enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + /* Cluster 1 */
> + cpucl1_0: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl1_1: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x101>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl1_2: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x102>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl1_3: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x103>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + /* Cluster 2 */
> + cpucl2_0: cpu@200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl2_1: cpu@201 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x201>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl2_2: cpu@202 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x202>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpucl2_3: cpu@203 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0 0x203>;
> + enable-method = "psci";
> + clock-frequency = <2400000000>;
> + cpu-idle-states = <&CPU_SLEEP>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + idle-states {
> + entry-method = "arm,psci";
> +
> + CPU_SLEEP: cpu-sleep {
> + idle-state-name = "c2";
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <30>;
> + exit-latency-us = <75>;
> + min-residency-us = <300>;
> + status = "okay";
> + };
> + };
> +
> + L2_0: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
> + <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
> + <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
> + <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
> + };
> +
> + psci {
> + compatible = "arm,psci";
> + method = "smc";
> + cpu_on = <0xC4000003>;
> + cpu_suspend = <0xC4000001>;
> + cpu_off = <0x84000002>;
These codes are standardized since forever. Fix your firmware.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + fin_pll: clock {
> + compatible = "fixed-clock";
> + clock-output-names = "fin_pll";
> + #clock-cells = <0>;
> + };
> +
> + soc: soc {
soc@0
You should see a warning for this.
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
> + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
> +
> + gic: interrupt-controller@10400000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
> + <0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
> + };
> +
> + smmu_isp: iommu@12100000 {
> + compatible = "arm,mmu-500";
> + reg = <0x0 0x12100000 0x0 0x10000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <11>;
> + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> + /* Performance counter interrupts */
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI */
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0 */
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1 */
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
> + /* Per context non-secure context interrupts, 0-7 interrupts */
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
> + status = "disabled";
IOMMU isn't really board specific, should it really be disabled?
> + };
> +
> + smmu_imem: iommu@10200000 {
> + compatible = "arm,mmu-500";
> + reg = <0x0 0x10200000 0x0 0x10000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <7>;
> + interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> + /* Performance counter interrupts */
> + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
> + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
> + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0 */
> + /* Per context non-secure context interrupts, 0-3 interrupts */
> + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
> + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
> + status = "disabled";
> + };
> +
> + smmu_peric: iommu@14900000 {
> + compatible = "arm,mmu-500";
> + reg = <0x0 0x14900000 0x0 0x10000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <5>;
> + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> + /* Performance counter interrupts */
> + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
> + /* Per context non-secure context interrupts, 0-1 interrupts */
> + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
> + status = "disabled";
> + };
> +
> + smmu_fsys0: iommu@15450000 {
> + compatible = "arm,mmu-500";
> + reg = <0x0 0x15450000 0x0 0x10000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <5>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> + /* Performance counter interrupts */
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0 */
> + /* Per context non-secure context interrupts, 0-1 interrupts */
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
> + status = "disabled";
> + };
> +
> + clock_cmu: clock-controller@11C10000 {
Lowercase hex for unit-addresses.
Also, arrange nodes in address order.
> + compatible = "tesla,fsd-clock-cmu";
> + reg = <0x0 0x11C10000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>;
> + clock-names = "fin_pll";
> + status = "disabled";
> + };
> +
> + clock_imem: clock-controller@10010000 {
> + compatible = "tesla,fsd-clock-imem";
> + reg = <0x0 0x10010000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>,
> + <&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
> + <&clock_cmu DOUT_CMU_IMEM_ACLK>,
> + <&clock_cmu DOUT_CMU_IMEM_DMACLK>;
> + clock-names = "fin_pll",
> + "dout_cmu_imem_tcuclk",
> + "dout_cmu_imem_aclk",
> + "dout_cmu_imem_dmaclk";
> + status = "disabled";
> + };
> +
> + clock_peric: clock-controller@14010000 {
> + compatible = "tesla,fsd-clock-peric";
> + reg = <0x0 0x14010000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>,
> + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
> + <&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
> + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
> + <&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
> + <&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
> + clock-names = "fin_pll",
> + "dout_cmu_pll_shared0_div4",
> + "dout_cmu_peric_shared1div36",
> + "dout_cmu_peric_shared0div3_tbuclk",
> + "dout_cmu_peric_shared0div20",
> + "dout_cmu_peric_shared1div4_dmaclk";
> + status = "disabled";
> + };
> +
> + clock_fsys0: clock-controller@15010000 {
> + compatible = "tesla,fsd-clock-fsys0";
> + reg = <0x0 0x15010000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>,
> + <&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
> + <&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
> + <&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
> + clock-names = "fin_pll",
> + "dout_cmu_pll_shared0_div6",
> + "dout_cmu_fsys0_shared1div4",
> + "dout_cmu_fsys0_shared0div4";
> + status = "disabled";
> + };
> +
> + clock_fsys1: clock-controller@16810000 {
> + compatible = "tesla,fsd-clock-fsys1";
> + reg = <0x0 0x16810000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>,
> + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
> + <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
> + clock-names = "fin_pll",
> + "dout_cmu_fsys1_shared0div8",
> + "dout_cmu_fsys1_shared0div4";
> + status = "disabled";
> + };
> +
> + clock_mfc: clock-controller@12810000 {
> + compatible = "tesla,fsd-clock-mfc";
> + reg = <0x0 0x12810000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>;
> + clock-names = "fin_pll";
> + status = "disabled";
> + };
> +
> + clock_csi: clock-controller@12610000 {
> + compatible = "tesla,fsd-clock-cam_csi";
> + reg = <0x0 0x12610000 0x0 0x3000>;
> + #clock-cells = <1>;
> + clocks = <&fin_pll>;
> + clock-names = "fin_pll";
> + status = "disabled";
> + };
> +
> + mdma0: mdma@10100000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0x10100000 0x0 0x1000>;
> + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
> + clock-names = "apb_pclk";
> + iommus = <&smmu_imem 0x800 0x0>;
> + status = "disabled";
> + };
> +
> + mdma1: mdma@10110000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0x10110000 0x0 0x1000>;
> + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
> + clock-names = "apb_pclk";
> + iommus = <&smmu_imem 0x801 0x0>;
> + status = "disabled";
> + };
> +
> + pdma0: pdma@14280000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0x14280000 0x0 0x1000>;
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
> + clock-names = "apb_pclk";
> + iommus = <&smmu_peric 0x2 0x0>;
> + status = "disabled";
> + };
> +
> + pdma1: pdma@14290000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0x14290000 0x0 0x1000>;
> + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
> + clock-names = "apb_pclk";
> + iommus = <&smmu_peric 0x1 0x0>;
> + status = "disabled";
> + };
> +
> + mct: mct@10040000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x0 0x10040000 0x0 0x800>;
> + interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
> + clock-names = "fin_pll", "mct";
> + };
> +
> + serial_0: serial@14180000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x0 0x14180000 0x0 0x100>;
> + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&pdma1 0>, <&pdma1 1>;
> + dma-names = "tx", "rx";
> + clocks = <&clock_peric PERIC_PCLK_UART0>,
> + <&clock_peric PERIC_SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + serial_1: serial@14190000 {
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x0 0x14190000 0x0 0x100>;
> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&pdma1 2>, <&pdma1 3>;
> + dma-names = "tx", "rx";
> + clocks = <&clock_peric PERIC_PCLK_UART1>,
> + <&clock_peric PERIC_SCLK_UART1>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + pmu_system_controller: system-controller@11400000 {
> + compatible = "samsung,exynos7-pmu", "syscon";
> + reg = <0x0 0x11400000 0x0 0x5000>;
> + };
> +
> + watchdog_0: watchdog@100A0000 {
> + compatible = "samsung,exynos7-wdt";
> + reg = <0x0 0x100A0000 0x0 0x100>;
> + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + clocks = <&fin_pll>;
> + clock-names = "watchdog";
> + interrupt-mode = <1>;
> + };
> +
> + watchdog_1: watchdog@100B0000 {
> + compatible = "samsung,exynos7-wdt";
> + reg = <0x0 0x100B0000 0x0 0x100>;
> + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + clocks = <&fin_pll>;
> + clock-names = "watchdog";
> + interrupt-mode = <1>;
> + };
> +
> + watchdog_2: watchdog@100C0000 {
> + compatible = "samsung,exynos7-wdt";
> + reg = <0x0 0x100C0000 0x0 0x100>;
> + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + clocks = <&fin_pll>;
> + clock-names = "watchdog";
> + interrupt-mode = <1>;
> + };
> +
> + pwm_0: pwm@14100000 {
> + compatible = "samsung,exynos4210-pwm";
> + reg = <0x0 0x14100000 0x0 0x100>;
> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> + #pwm-cells = <3>;
> + clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
> + clock-names = "timers";
> + status = "disabled";
> + };
> +
> + pwm_1: pwm@14110000 {
> + compatible = "samsung,exynos4210-pwm";
> + reg = <0x0 0x14110000 0x0 0x100>;
> + samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> + #pwm-cells = <3>;
> + clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
> + clock-names = "timers";
> + status = "disabled";
> + };
> +
> + hsi2c_0: hsi2c@14200000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14200000 0x0 0x1000>;
> + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c0_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_1: hsi2c@14210000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14210000 0x0 0x1000>;
> + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c1_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_2: hsi2c@14220000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14220000 0x0 0x1000>;
> + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c2_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_3: hsi2c@14230000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14230000 0x0 0x1000>;
> + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c3_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_4: hsi2c@14240000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14240000 0x0 0x1000>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c4_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_5: hsi2c@14250000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14250000 0x0 0x1000>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c5_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_6: hsi2c@14260000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14260000 0x0 0x1000>;
> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c6_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> +
> + hsi2c_7: hsi2c@14270000 {
> + compatible = "samsung,exynos7-hsi2c";
> + reg = <0x0 0x14270000 0x0 0x1000>;
> + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hs_i2c7_bus>;
> + clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
> + clock-names = "hsi2c";
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-14 2:47 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220113122302epcas5p1d45c0714fe286f8f91d0f28c3fad86e4@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Alim Akhtar
[not found] ` <CGME20220113122311epcas5p4b7c253b49dce3bd3580407fcf312e70e@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 01/23] dt-bindings: clock: Document FSD CMU bindings Alim Akhtar
2022-01-13 12:40 ` Krzysztof Kozlowski
2022-01-14 5:48 ` Alim Akhtar
2022-01-13 23:33 ` Rob Herring
[not found] ` <CGME20220113122317epcas5p11937078e2701b319a13b29e044224ec0@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 02/23] dt-bindings: clock: Add bindings definitions for FSD CMU blocks Alim Akhtar
[not found] ` <CGME20220113122324epcas5p105c53b448b5801813a02a88c6107a2f3@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 03/23] clk: samsung: fsd: Add initial clock support Alim Akhtar
2022-01-13 12:49 ` Krzysztof Kozlowski
2022-01-14 6:16 ` Alim Akhtar
[not found] ` <CGME20220113122330epcas5p46ae5cd30950b1d9126479231dcf5da49@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 04/23] clk: samsung: fsd: Add cmu_peric block clock information Alim Akhtar
2022-01-13 12:55 ` Krzysztof Kozlowski
2022-01-14 6:30 ` Alim Akhtar
[not found] ` <CGME20220113122334epcas5p2d5958c77b0635e848f81ed2c5c98cdd5@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 05/23] clk: samsung: fsd: Add cmu_fsys0 " Alim Akhtar
[not found] ` <CGME20220113122338epcas5p17ad3a31077b98388c0a6779904ee651e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 06/23] clk: samsung: fsd: Add cmu_fsys1 " Alim Akhtar
[not found] ` <CGME20220113122343epcas5p23831143e4e8fb92be8ad362f4817c03b@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 07/23] clk: samsung: fsd: Add cmu_imem block " Alim Akhtar
[not found] ` <CGME20220113122346epcas5p41a7d6712c07544e99795ef5465f1f106@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 08/23] clk: samsung: fsd: Add cmu_mfc " Alim Akhtar
[not found] ` <CGME20220113122351epcas5p45f49a559af9f6d0c6ba573594f95561d@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 09/23] clk: samsung: fsd: Add cam_csi " Alim Akhtar
[not found] ` <CGME20220113122354epcas5p19e5cebe9e85e9ba1758fa0b9d7d1ef75@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 10/23] dt-bindings: pinctrl: samsung: Add compatible for Tesla FSD SoC Alim Akhtar
2022-01-13 12:27 ` Krzysztof Kozlowski
2022-01-14 5:44 ` Alim Akhtar
2022-01-14 7:49 ` Krzysztof Kozlowski
2022-01-14 8:38 ` Alim Akhtar
[not found] ` <CGME20220113122400epcas5p34363ba8f477b4c273d601d0b64324afa@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 11/23] pinctrl: samsung: add FSD SoC specific data Alim Akhtar
2022-01-13 12:57 ` Krzysztof Kozlowski
2022-01-16 12:05 ` Linus Walleij
[not found] ` <CGME20220113122404epcas5p4aa1c3ac09510eb55cce5fdd0791993a6@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 12/23] dt-bindings: add vendor prefix for Tesla Alim Akhtar
2022-01-13 12:58 ` Krzysztof Kozlowski
2022-01-14 7:10 ` Alim Akhtar
2022-01-16 12:09 ` Linus Walleij
[not found] ` <CGME20220113122408epcas5p45053d1bf0acf2d8233a98b6c1abab6eb@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 13/23] dt-bindings: arm: add Tesla FSD ARM SoC Alim Akhtar
2022-01-13 12:33 ` Krzysztof Kozlowski
2022-01-14 16:57 ` Alim Akhtar
2022-01-14 17:29 ` Krzysztof Kozlowski
2022-01-17 13:26 ` Alim Akhtar
2022-01-17 14:14 ` Arnd Bergmann
2022-01-17 15:00 ` Krzysztof Kozlowski
2022-01-17 20:41 ` Olof Johansson
[not found] ` <CGME20220113122413epcas5p46cb2cafb73936c423017240f98f72845@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 14/23] arm64: dts: fsd: Add initial device tree support Alim Akhtar
2022-01-13 13:16 ` Krzysztof Kozlowski
2022-01-13 14:23 ` Arnd Bergmann
2022-01-14 8:13 ` Alim Akhtar
2022-01-14 2:08 ` kernel test robot
2022-01-14 2:45 ` Rob Herring [this message]
2022-01-15 15:31 ` Alim Akhtar
[not found] ` <CGME20220113122417epcas5p47398a5190cdf4c574c6f1762918b549f@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 15/23] arm64: dts: fsd: Add initial pinctrl support Alim Akhtar
2022-01-13 13:19 ` Krzysztof Kozlowski
2022-01-17 13:44 ` Alim Akhtar
2022-01-17 13:50 ` Krzysztof Kozlowski
2022-01-18 14:58 ` Alim Akhtar
[not found] ` <CGME20220113122421epcas5p1af8422fc992801ced57e0439b48ad08e@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 16/23] arm64: defconfig: Enable Tesla FSD SoC Alim Akhtar
[not found] ` <CGME20220113122427epcas5p1885d8b3b735e8f127b6694a309796e5a@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 17/23] Documentation: bindings: Add fsd spi compatible in dt-bindings document Alim Akhtar
2022-01-13 13:21 ` Krzysztof Kozlowski
2022-01-13 13:24 ` Krzysztof Kozlowski
2022-01-14 7:17 ` Alim Akhtar
[not found] ` <CGME20220113122435epcas5p18e6a2699f193b9e1287588278a570235@epcas5p1.samsung.com>
2022-01-13 12:11 ` [PATCH 18/23] spi: s3c64xx: Add spi port configuration for Tesla FSD SoC Alim Akhtar
2022-01-13 12:59 ` Mark Brown
2022-01-14 7:15 ` Alim Akhtar
2022-01-13 13:28 ` Krzysztof Kozlowski
2022-01-16 12:12 ` Linus Walleij
[not found] ` <CGME20220113122440epcas5p4651d7cb2fc6d6a70fd5eaab5eadcf996@epcas5p4.samsung.com>
2022-01-13 12:11 ` [PATCH 19/23] arm64: dts: fsd: Add SPI device nodes Alim Akhtar
2022-01-13 13:30 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122447epcas5p266d44c8df143229d22dfa700c285a786@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 20/23] dt-bindings: iio: adc: exynos-adc: Add ADC-V3 variant Alim Akhtar
2022-01-13 13:32 ` Krzysztof Kozlowski
2022-01-17 9:47 ` Jonathan Cameron
2022-01-17 12:42 ` Alim Akhtar
[not found] ` <CGME20220113122452epcas5p201a3a87d0e9c0e9f449a90ed62de1f1c@epcas5p2.samsung.com>
2022-01-13 12:11 ` [PATCH 21/23] iio: adc: exynos-adc: Add support for ADC V3 controller Alim Akhtar
2022-01-16 11:19 ` Jonathan Cameron
2022-01-17 12:20 ` Alim Akhtar
[not found] ` <CGME20220113122456epcas5p35f6406ab03af58d2e56b0b7304d4d002@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 22/23] arm64: dts: fsd: Add ADC device tree node Alim Akhtar
2022-01-13 13:33 ` Krzysztof Kozlowski
[not found] ` <CGME20220113122502epcas5p37747b0c5c242c0571d294b9245963a1c@epcas5p3.samsung.com>
2022-01-13 12:11 ` [PATCH 23/23] clocksource: exynos_mct: Add support for handling three clusters Alim Akhtar
2022-01-13 13:36 ` Krzysztof Kozlowski
2022-01-13 12:31 ` [PATCH 00/23] Add support for Tesla Full Self-Driving (FSD) SoC Krzysztof Kozlowski
2022-01-13 18:53 ` Olof Johansson
2022-01-14 5:41 ` Alim Akhtar
2022-01-14 7:34 ` Krzysztof Kozlowski
2022-01-16 9:23 ` Pavel Machek
2022-01-17 20:53 ` Olof Johansson
2022-01-17 23:10 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqKDbzy8y61Oj8Ey++atoMn1HYPyDZRc_cJQCe_tfkDGxQ@mail.gmail.com \
--to=robh+dt@kernel.org \
--cc=ajaykumar.rs@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=arjun.kv@samsung.com \
--cc=aswani.reddy@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fsd@tesla.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=pankaj.dubey@samsung.com \
--cc=rcsekar@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=s.prashar@samsung.com \
--cc=soc@kernel.org \
--cc=sriranjani.p@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).