[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[Shuah Khan]

This patch series fixes inefficiencies and lock contention in the request
firmware paths.

Shuah Khan (2):
  media: s5p-mfc: check for firmware allocation before requesting
    firmware
  media: s5p-mfc: fix lock confection - request_firmware() once and keep
    state

 drivers/media/platform/s5p-mfc/s5p_mfc.c        |  4 ++++
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h |  3 +++
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 15 ++++++++++-----
 3 files changed, 17 insertions(+), 5 deletions(-)

-- 
2.7.4

[PATCH 1/2] media: s5p-mfc: check for firmware allocation before requesting firmware

[Shuah Khan]

Check if firmware is allocated before requesting firmware instead of
requesting firmware only to release it if firmware is not allocated.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 69ef9c2..f064a0d1 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -55,6 +55,11 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 	 * into kernel. */
 	mfc_debug_enter();
 
+	if (!dev->fw_buf.virt) {
+		mfc_err("MFC firmware is not allocated\n");
+		return -EINVAL;
+	}
+
 	for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
 		if (!dev->variant->fw_name[i])
 			continue;
@@ -75,11 +80,6 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 		release_firmware(fw_blob);
 		return -ENOMEM;
 	}
-	if (!dev->fw_buf.virt) {
-		mfc_err("MFC firmware is not allocated\n");
-		release_firmware(fw_blob);
-		return -EINVAL;
-	}
 	memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
 	wmb();
 	release_firmware(fw_blob);
-- 
2.7.4

[PATCH 2/2] media: s5p-mfc: fix lock confection - request_firmware() once and keep state

[Shuah Khan]

Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.

fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.

This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().

Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.

s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.

This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:

[  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[  552.199488]  (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.207459]
               but task is already holding lock:
[  552.213264]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[  552.220284]
               which lock already depends on the new lock.

[  552.228429]
               the existing dependency chain (in reverse order) is:
[  552.235881]
               -> #2 (&mm->mmap_sem){++++}:
[  552.241259]        __might_fault+0x80/0xb0
[  552.245331]        filldir64+0xc0/0x2f8
[  552.249144]        call_filldir+0xb0/0x14c
[  552.253214]        ext4_readdir+0x768/0x90c
[  552.257374]        iterate_dir+0x74/0x168
[  552.261360]        SyS_getdents64+0x7c/0x1a0
[  552.265608]        ret_fast_syscall+0x0/0x28
[  552.269850]
               -> #1 (&type->i_mutex_dir_key#2){++++}:
[  552.276180]        down_read+0x48/0x90
[  552.279904]        lookup_slow+0x74/0x178
[  552.283889]        walk_component+0x1a4/0x2e4
[  552.288222]        link_path_walk+0x174/0x4a0
[  552.292555]        path_openat+0x68/0x944
[  552.296541]        do_filp_open+0x60/0xc4
[  552.300528]        file_open_name+0xe4/0x114
[  552.304772]        filp_open+0x28/0x48
[  552.308499]        kernel_read_file_from_path+0x30/0x78
[  552.313700]        _request_firmware+0x3ec/0x78c
[  552.318291]        request_firmware+0x3c/0x54
[  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
[  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
[  552.333394]        v4l2_open+0xa0/0x104 [videodev]
[  552.338137]        chrdev_open+0xa4/0x18c
[  552.342121]        do_dentry_open+0x208/0x310
[  552.346454]        path_openat+0x28c/0x944
[  552.350526]        do_filp_open+0x60/0xc4
[  552.354512]        do_sys_open+0x118/0x1c8
[  552.358586]        ret_fast_syscall+0x0/0x28
[  552.362830]
               -> #0 (&dev->mfc_mutex){+.+.}:
               -> #0 (&dev->mfc_mutex){+.+.}:
[  552.368379]        lock_acquire+0x6c/0x88
[  552.372364]        __mutex_lock+0x68/0xa34
[  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
[  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
[  552.391601]        mmap_region+0x3a8/0x638
[  552.395673]        do_mmap+0x330/0x3a4
[  552.399400]        vm_mmap_pgoff+0x90/0xb8
[  552.403472]        SyS_mmap_pgoff+0x90/0xc0
[  552.407632]        ret_fast_syscall+0x0/0x28
[  552.411876]
               other info that might help us debug this:

[  552.419848] Chain exists of:
                 &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem

[  552.431200]  Possible unsafe locking scenario:

[  552.437092]        CPU0                    CPU1
[  552.441598]        ----                    ----
[  552.446104]   lock(&mm->mmap_sem);
[  552.449484]                                lock(&type->i_mutex_dir_key#2);
[  552.456329]                                lock(&mm->mmap_sem);
[  552.462222]   lock(&dev->mfc_mutex);
[  552.465775]
                *** DEADLOCK ***

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c        | 4 ++++
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 5 +++++
 3 files changed, 12 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 1afde50..4c253fb 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1315,6 +1315,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
 		goto err_dma;
 	}
 
+	ret = s5p_mfc_load_firmware(dev);
+	if (ret)
+		mfc_err("Failed to load FW - try loading from open()\n");
+
 	mutex_init(&dev->mfc_mutex);
 	init_waitqueue_head(&dev->queue);
 	dev->hw_lock = 0;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 4220914..76119a8 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -290,6 +290,8 @@ struct s5p_mfc_priv_buf {
  * @mfc_cmds:		cmd structure holding HW commands function pointers
  * @mfc_regs:		structure holding MFC registers
  * @fw_ver:		loaded firmware sub-version
+ * @fw_get_done		flag set when request_firmware() is complete and
+ *			copied into fw_buf
  * risc_on:		flag indicates RISC is on or off
  *
  */
@@ -336,6 +338,7 @@ struct s5p_mfc_dev {
 	struct s5p_mfc_hw_cmds *mfc_cmds;
 	const struct s5p_mfc_regs *mfc_regs;
 	enum s5p_mfc_fw_ver fw_ver;
+	bool fw_get_done;
 	bool risc_on; /* indicates if RISC is on or off */
 };
 
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index f064a0d1..ca57936 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -55,6 +55,9 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 	 * into kernel. */
 	mfc_debug_enter();
 
+	if (dev->fw_get_done)
+		return 0;
+
 	if (!dev->fw_buf.virt) {
 		mfc_err("MFC firmware is not allocated\n");
 		return -EINVAL;
@@ -82,6 +85,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 	}
 	memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
 	wmb();
+	dev->fw_get_done = true;
 	release_firmware(fw_blob);
 	mfc_debug_leave();
 	return 0;
@@ -93,6 +97,7 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
 	/* Before calling this function one has to make sure
 	 * that MFC is no longer processing */
 	s5p_mfc_release_priv_buf(dev, &dev->fw_buf);
+	dev->fw_get_done = false;
 	return 0;
 }
 
-- 
2.7.4

[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[Shuah Khan]

On 10/06/2017 03:30 PM, Shuah Khan wrote:
> This patch series fixes inefficiencies and lock contention in the request
> firmware paths.
> 
> Shuah Khan (2):
>   media: s5p-mfc: check for firmware allocation before requesting
>     firmware
>   media: s5p-mfc: fix lock confection - request_firmware() once and keep
>     state
> 
>  drivers/media/platform/s5p-mfc/s5p_mfc.c        |  4 ++++
>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h |  3 +++
>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 15 ++++++++++-----
>  3 files changed, 17 insertions(+), 5 deletions(-)
> 

Any feedback on this series?

thanks,
-- Shuah

[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[Marian Mihailescu]

Hi Shuah,

For MFC patch, you can delete the "dev" variable since it's not being
used anymore and results in a compile warning.

- struct s5p_mfc_dev *dev = ctx->dev;

Cheers,
Marian

On Thu, Oct 26, 2017 at 7:54 AM, Shuah Khan <shuahkh@osg.samsung.com> wrote:
> On 10/06/2017 03:30 PM, Shuah Khan wrote:
>> This patch series fixes inefficiencies and lock contention in the request
>> firmware paths.
>>
>> Shuah Khan (2):
>>   media: s5p-mfc: check for firmware allocation before requesting
>>     firmware
>>   media: s5p-mfc: fix lock confection - request_firmware() once and keep
>>     state
>>
>>  drivers/media/platform/s5p-mfc/s5p_mfc.c        |  4 ++++
>>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h |  3 +++
>>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 15 ++++++++++-----
>>  3 files changed, 17 insertions(+), 5 deletions(-)
>>
>
> Any feedback on this series?
>
> thanks,
> -- Shuah

[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[Shuah Khan]

On 10/25/2017 04:28 PM, Marian Mihailescu wrote:
> Hi Shuah,
> 
> For MFC patch, you can delete the "dev" variable since it's not being
> used anymore and results in a compile warning.
> 
> - struct s5p_mfc_dev *dev = ctx->dev;
> 
> Cheers,
> Marian

Oops. I thought I handled that. I will fix that and resend the patch.

thanks,
-- Shuah

[PATCH 0/2] Fix s5p-mfc lock contention in request firmware paths

[Shuah Khan]

On 10/25/2017 04:28 PM, Marian Mihailescu wrote:
> Hi Shuah,
> 
> For MFC patch, you can delete the "dev" variable since it's not being
> used anymore and results in a compile warning.
> 
> - struct s5p_mfc_dev *dev = ctx->dev;
> 

Hi Marian,

This series doesn't have the unused warn problem. I fixed the problem
in media: s5p-mfc: fix lockdep warning patch that has the warning and
sent v2.


> On Thu, Oct 26, 2017 at 7:54 AM, Shuah Khan <shuahkh@osg.samsung.com> wrote:
>> On 10/06/2017 03:30 PM, Shuah Khan wrote:
>>> This patch series fixes inefficiencies and lock contention in the request
>>> firmware paths.
>>>
>>> Shuah Khan (2):
>>>   media: s5p-mfc: check for firmware allocation before requesting
>>>     firmware
>>>   media: s5p-mfc: fix lock confection - request_firmware() once and keep
>>>     state
>>>
>>>  drivers/media/platform/s5p-mfc/s5p_mfc.c        |  4 ++++
>>>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h |  3 +++
>>>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 15 ++++++++++-----
>>>  3 files changed, 17 insertions(+), 5 deletions(-)
>>>
>>
>> Any feedback on this series?
>>

Still waiting for feedback on this series.

thanks,
-- Shuah

[PATCH 1/2] media: s5p-mfc: check for firmware allocation before requesting firmware

[Andrzej Hajda]

Hi Shuah,

On 06.10.2017 23:30, Shuah Khan wrote:
> Check if firmware is allocated before requesting firmware instead of
> requesting firmware only to release it if firmware is not allocated.
>
> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> index 69ef9c2..f064a0d1 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> @@ -55,6 +55,11 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>  	 * into kernel. */
>  	mfc_debug_enter();
>  
> +	if (!dev->fw_buf.virt) {
> +		mfc_err("MFC firmware is not allocated\n");
> +		return -EINVAL;
> +	}
> +
>  	for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
>  		if (!dev->variant->fw_name[i])
>  			continue;
> @@ -75,11 +80,6 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>  		release_firmware(fw_blob);
>  		return -ENOMEM;
>  	}
> -	if (!dev->fw_buf.virt) {
> -		mfc_err("MFC firmware is not allocated\n");
> -		release_firmware(fw_blob);
> -		return -EINVAL;
> -	}

Is there any scenario in which dev->fw_buf.virt is null and
s5p_mfc_load_firmware is called?
I suspect this check is not necessary at all.

Regards
Andrzej

>  	memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
>  	wmb();
>  	release_firmware(fw_blob);

[PATCH 2/2] media: s5p-mfc: fix lock confection - request_firmware() once and keep state

[Andrzej Hajda]

On 06.10.2017 23:30, Shuah Khan wrote:
> Driver calls request_firmware() whenever the device is opened for the
> first time. As the device gets opened and closed, dev->num_inst == 1
> is true several times. This is not necessary since the firmware is saved
> in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
> the request_firmware() to dev->fw_buf.
>
> fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
> there is no need to keep requesting firmware and copying it to fw_buf.
>
> This might have been overlooked when changes are made to free fw_buf from
> the device release interface s5p_mfc_release().
>
> Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
> Change _probe() to load firmware once fw_buf has been allocated.
>
> s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
> hardware which is the step where firmware is written to the device.
>
> This addresses the mfc_mutex contention due to repeated request_firmware()
> calls from open() in the following circular locking warning:
>
> [  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
> [  552.199488]  (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
> [  552.207459]
>                but task is already holding lock:
> [  552.213264]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
> [  552.220284]
>                which lock already depends on the new lock.
>
> [  552.228429]
>                the existing dependency chain (in reverse order) is:
> [  552.235881]
>                -> #2 (&mm->mmap_sem){++++}:
> [  552.241259]        __might_fault+0x80/0xb0
> [  552.245331]        filldir64+0xc0/0x2f8
> [  552.249144]        call_filldir+0xb0/0x14c
> [  552.253214]        ext4_readdir+0x768/0x90c
> [  552.257374]        iterate_dir+0x74/0x168
> [  552.261360]        SyS_getdents64+0x7c/0x1a0
> [  552.265608]        ret_fast_syscall+0x0/0x28
> [  552.269850]
>                -> #1 (&type->i_mutex_dir_key#2){++++}:
> [  552.276180]        down_read+0x48/0x90
> [  552.279904]        lookup_slow+0x74/0x178
> [  552.283889]        walk_component+0x1a4/0x2e4
> [  552.288222]        link_path_walk+0x174/0x4a0
> [  552.292555]        path_openat+0x68/0x944
> [  552.296541]        do_filp_open+0x60/0xc4
> [  552.300528]        file_open_name+0xe4/0x114
> [  552.304772]        filp_open+0x28/0x48
> [  552.308499]        kernel_read_file_from_path+0x30/0x78
> [  552.313700]        _request_firmware+0x3ec/0x78c
> [  552.318291]        request_firmware+0x3c/0x54
> [  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
> [  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
> [  552.333394]        v4l2_open+0xa0/0x104 [videodev]
> [  552.338137]        chrdev_open+0xa4/0x18c
> [  552.342121]        do_dentry_open+0x208/0x310
> [  552.346454]        path_openat+0x28c/0x944
> [  552.350526]        do_filp_open+0x60/0xc4
> [  552.354512]        do_sys_open+0x118/0x1c8
> [  552.358586]        ret_fast_syscall+0x0/0x28
> [  552.362830]
>                -> #0 (&dev->mfc_mutex){+.+.}:
>                -> #0 (&dev->mfc_mutex){+.+.}:
> [  552.368379]        lock_acquire+0x6c/0x88
> [  552.372364]        __mutex_lock+0x68/0xa34
> [  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
> [  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
> [  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
> [  552.391601]        mmap_region+0x3a8/0x638
> [  552.395673]        do_mmap+0x330/0x3a4
> [  552.399400]        vm_mmap_pgoff+0x90/0xb8
> [  552.403472]        SyS_mmap_pgoff+0x90/0xc0
> [  552.407632]        ret_fast_syscall+0x0/0x28
> [  552.411876]
>                other info that might help us debug this:
>
> [  552.419848] Chain exists of:
>                  &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem
>
> [  552.431200]  Possible unsafe locking scenario:
>
> [  552.437092]        CPU0                    CPU1
> [  552.441598]        ----                    ----
> [  552.446104]   lock(&mm->mmap_sem);
> [  552.449484]                                lock(&type->i_mutex_dir_key#2);
> [  552.456329]                                lock(&mm->mmap_sem);
> [  552.462222]   lock(&dev->mfc_mutex);
> [  552.465775]
>                 *** DEADLOCK ***

I am not 100% but it looks like false positive. Could you describe
scenario when it deadlocks?

>
> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
> ---
>  drivers/media/platform/s5p-mfc/s5p_mfc.c        | 4 ++++
>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 5 +++++
>  3 files changed, 12 insertions(+)
>
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index 1afde50..4c253fb 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -1315,6 +1315,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
>  		goto err_dma;
>  	}
>  
> +	ret = s5p_mfc_load_firmware(dev);
> +	if (ret)
> +		mfc_err("Failed to load FW - try loading from open()\n");
> +

What is the point of adding it? It will produce error log in case
filesystem is not yet mounted, and as I remember it was the reason to
put fw load to open callback.

Regards
Andrzej

>  	mutex_init(&dev->mfc_mutex);
>  	init_waitqueue_head(&dev->queue);
>  	dev->hw_lock = 0;
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> index 4220914..76119a8 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> @@ -290,6 +290,8 @@ struct s5p_mfc_priv_buf {
>   * @mfc_cmds:		cmd structure holding HW commands function pointers
>   * @mfc_regs:		structure holding MFC registers
>   * @fw_ver:		loaded firmware sub-version
> + * @fw_get_done		flag set when request_firmware() is complete and
> + *			copied into fw_buf
>   * risc_on:		flag indicates RISC is on or off
>   *
>   */
> @@ -336,6 +338,7 @@ struct s5p_mfc_dev {
>  	struct s5p_mfc_hw_cmds *mfc_cmds;
>  	const struct s5p_mfc_regs *mfc_regs;
>  	enum s5p_mfc_fw_ver fw_ver;
> +	bool fw_get_done;
>  	bool risc_on; /* indicates if RISC is on or off */
>  };
>  
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> index f064a0d1..ca57936 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> @@ -55,6 +55,9 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>  	 * into kernel. */
>  	mfc_debug_enter();
>  
> +	if (dev->fw_get_done)
> +		return 0;
> +
>  	if (!dev->fw_buf.virt) {
>  		mfc_err("MFC firmware is not allocated\n");
>  		return -EINVAL;
> @@ -82,6 +85,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>  	}
>  	memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
>  	wmb();
> +	dev->fw_get_done = true;
>  	release_firmware(fw_blob);
>  	mfc_debug_leave();
>  	return 0;
> @@ -93,6 +97,7 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
>  	/* Before calling this function one has to make sure
>  	 * that MFC is no longer processing */
>  	s5p_mfc_release_priv_buf(dev, &dev->fw_buf);
> +	dev->fw_get_done = false;
>  	return 0;
>  }
>  

[PATCH 1/2] media: s5p-mfc: check for firmware allocation before requesting firmware

[Shuah Khan]

On 11/02/2017 02:12 AM, Andrzej Hajda wrote:
> Hi Shuah,
> 
> On 06.10.2017 23:30, Shuah Khan wrote:
>> Check if firmware is allocated before requesting firmware instead of
>> requesting firmware only to release it if firmware is not allocated.
>>
>> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
>> ---
>>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 10 +++++-----
>>  1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> index 69ef9c2..f064a0d1 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
>> @@ -55,6 +55,11 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>>  	 * into kernel. */
>>  	mfc_debug_enter();
>>  
>> +	if (!dev->fw_buf.virt) {
>> +		mfc_err("MFC firmware is not allocated\n");
>> +		return -EINVAL;
>> +	}
>> +
>>  	for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
>>  		if (!dev->variant->fw_name[i])
>>  			continue;
>> @@ -75,11 +80,6 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
>>  		release_firmware(fw_blob);
>>  		return -ENOMEM;
>>  	}
>> -	if (!dev->fw_buf.virt) {
>> -		mfc_err("MFC firmware is not allocated\n");
>> -		release_firmware(fw_blob);
>> -		return -EINVAL;
>> -	}
> 
> Is there any scenario in which dev->fw_buf.virt is null and
> s5p_mfc_load_firmware is called?
> I suspect this check is not necessary at all.
> 

I don't believe so. Allocation is done in s5p_mfc_configure_dma_memory()
code path and if that fails it bails out of _probe. I can remove the check
all together.

thanks,
-- Shuah

[PATCH 2/2] media: s5p-mfc: fix lock confection - request_firmware() once and keep state

[Shuah Khan]

On 11/02/2017 02:31 AM, Andrzej Hajda wrote:
> On 06.10.2017 23:30, Shuah Khan wrote:
>> Driver calls request_firmware() whenever the device is opened for the
>> first time. As the device gets opened and closed, dev->num_inst == 1
>> is true several times. This is not necessary since the firmware is saved
>> in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
>> the request_firmware() to dev->fw_buf.
>>
>> fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
>> there is no need to keep requesting firmware and copying it to fw_buf.
>>
>> This might have been overlooked when changes are made to free fw_buf from
>> the device release interface s5p_mfc_release().
>>
>> Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
>> Change _probe() to load firmware once fw_buf has been allocated.
>>
>> s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
>> hardware which is the step where firmware is written to the device.
>>
>> This addresses the mfc_mutex contention due to repeated request_firmware()
>> calls from open() in the following circular locking warning:
>>
>> [  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
>> [  552.199488]  (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
>> [  552.207459]
>>                but task is already holding lock:
>> [  552.213264]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
>> [  552.220284]
>>                which lock already depends on the new lock.
>>
>> [  552.228429]
>>                the existing dependency chain (in reverse order) is:
>> [  552.235881]
>>                -> #2 (&mm->mmap_sem){++++}:
>> [  552.241259]        __might_fault+0x80/0xb0
>> [  552.245331]        filldir64+0xc0/0x2f8
>> [  552.249144]        call_filldir+0xb0/0x14c
>> [  552.253214]        ext4_readdir+0x768/0x90c
>> [  552.257374]        iterate_dir+0x74/0x168
>> [  552.261360]        SyS_getdents64+0x7c/0x1a0
>> [  552.265608]        ret_fast_syscall+0x0/0x28
>> [  552.269850]
>>                -> #1 (&type->i_mutex_dir_key#2){++++}:
>> [  552.276180]        down_read+0x48/0x90
>> [  552.279904]        lookup_slow+0x74/0x178
>> [  552.283889]        walk_component+0x1a4/0x2e4
>> [  552.288222]        link_path_walk+0x174/0x4a0
>> [  552.292555]        path_openat+0x68/0x944
>> [  552.296541]        do_filp_open+0x60/0xc4
>> [  552.300528]        file_open_name+0xe4/0x114
>> [  552.304772]        filp_open+0x28/0x48
>> [  552.308499]        kernel_read_file_from_path+0x30/0x78
>> [  552.313700]        _request_firmware+0x3ec/0x78c
>> [  552.318291]        request_firmware+0x3c/0x54
>> [  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
>> [  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
>> [  552.333394]        v4l2_open+0xa0/0x104 [videodev]
>> [  552.338137]        chrdev_open+0xa4/0x18c
>> [  552.342121]        do_dentry_open+0x208/0x310
>> [  552.346454]        path_openat+0x28c/0x944
>> [  552.350526]        do_filp_open+0x60/0xc4
>> [  552.354512]        do_sys_open+0x118/0x1c8
>> [  552.358586]        ret_fast_syscall+0x0/0x28
>> [  552.362830]
>>                -> #0 (&dev->mfc_mutex){+.+.}:
>>                -> #0 (&dev->mfc_mutex){+.+.}:
>> [  552.368379]        lock_acquire+0x6c/0x88
>> [  552.372364]        __mutex_lock+0x68/0xa34
>> [  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
>> [  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
>> [  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
>> [  552.391601]        mmap_region+0x3a8/0x638
>> [  552.395673]        do_mmap+0x330/0x3a4
>> [  552.399400]        vm_mmap_pgoff+0x90/0xb8
>> [  552.403472]        SyS_mmap_pgoff+0x90/0xc0
>> [  552.407632]        ret_fast_syscall+0x0/0x28
>> [  552.411876]
>>                other info that might help us debug this:
>>
>> [  552.419848] Chain exists of:
>>                  &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem
>>
>> [  552.431200]  Possible unsafe locking scenario:
>>
>> [  552.437092]        CPU0                    CPU1
>> [  552.441598]        ----                    ----
>> [  552.446104]   lock(&mm->mmap_sem);
>> [  552.449484]                                lock(&type->i_mutex_dir_key#2);
>> [  552.456329]                                lock(&mm->mmap_sem);
>> [  552.462222]   lock(&dev->mfc_mutex);
>> [  552.465775]
>>                 *** DEADLOCK ***
> 
> I am not 100% but it looks like false positive. Could you describe
> scenario when it deadlocks?
> 
>>
>> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
>> ---
>>  drivers/media/platform/s5p-mfc/s5p_mfc.c        | 4 ++++
>>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
>>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 5 +++++
>>  3 files changed, 12 insertions(+)
>>
>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
>> index 1afde50..4c253fb 100644
>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
>> @@ -1315,6 +1315,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
>>  		goto err_dma;
>>  	}
>>  
>> +	ret = s5p_mfc_load_firmware(dev);
>> +	if (ret)
>> +		mfc_err("Failed to load FW - try loading from open()\n");
>> +
> 
> What is the point of adding it? It will produce error log in case
> filesystem is not yet mounted, and as I remember it was the reason to
> put fw load to open callback.

"What is the point of adding it" does it mean the error message or the
attempt to load the firmware. Would it be okay to just try to load and
not print error if it fails? If it works at this stage, _open() doesn't
have to take time hit trying to load it.

thanks,
-- Shuah

[PATCH 2/2] media: s5p-mfc: fix lock confection - request_firmware() once and keep state

[Marian Mihailescu]

I can confirm, with this patch, there is always error loading MFC in
boot log, since FS is not mounted.

-Marian

On Fri, Nov 3, 2017 at 10:57 AM, Shuah Khan <shuahkh@osg.samsung.com> wrote:
> On 11/02/2017 02:31 AM, Andrzej Hajda wrote:
>> On 06.10.2017 23:30, Shuah Khan wrote:
>>> Driver calls request_firmware() whenever the device is opened for the
>>> first time. As the device gets opened and closed, dev->num_inst == 1
>>> is true several times. This is not necessary since the firmware is saved
>>> in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
>>> the request_firmware() to dev->fw_buf.
>>>
>>> fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
>>> there is no need to keep requesting firmware and copying it to fw_buf.
>>>
>>> This might have been overlooked when changes are made to free fw_buf from
>>> the device release interface s5p_mfc_release().
>>>
>>> Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
>>> Change _probe() to load firmware once fw_buf has been allocated.
>>>
>>> s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
>>> hardware which is the step where firmware is written to the device.
>>>
>>> This addresses the mfc_mutex contention due to repeated request_firmware()
>>> calls from open() in the following circular locking warning:
>>>
>>> [  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
>>> [  552.199488]  (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
>>> [  552.207459]
>>>                but task is already holding lock:
>>> [  552.213264]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
>>> [  552.220284]
>>>                which lock already depends on the new lock.
>>>
>>> [  552.228429]
>>>                the existing dependency chain (in reverse order) is:
>>> [  552.235881]
>>>                -> #2 (&mm->mmap_sem){++++}:
>>> [  552.241259]        __might_fault+0x80/0xb0
>>> [  552.245331]        filldir64+0xc0/0x2f8
>>> [  552.249144]        call_filldir+0xb0/0x14c
>>> [  552.253214]        ext4_readdir+0x768/0x90c
>>> [  552.257374]        iterate_dir+0x74/0x168
>>> [  552.261360]        SyS_getdents64+0x7c/0x1a0
>>> [  552.265608]        ret_fast_syscall+0x0/0x28
>>> [  552.269850]
>>>                -> #1 (&type->i_mutex_dir_key#2){++++}:
>>> [  552.276180]        down_read+0x48/0x90
>>> [  552.279904]        lookup_slow+0x74/0x178
>>> [  552.283889]        walk_component+0x1a4/0x2e4
>>> [  552.288222]        link_path_walk+0x174/0x4a0
>>> [  552.292555]        path_openat+0x68/0x944
>>> [  552.296541]        do_filp_open+0x60/0xc4
>>> [  552.300528]        file_open_name+0xe4/0x114
>>> [  552.304772]        filp_open+0x28/0x48
>>> [  552.308499]        kernel_read_file_from_path+0x30/0x78
>>> [  552.313700]        _request_firmware+0x3ec/0x78c
>>> [  552.318291]        request_firmware+0x3c/0x54
>>> [  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
>>> [  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
>>> [  552.333394]        v4l2_open+0xa0/0x104 [videodev]
>>> [  552.338137]        chrdev_open+0xa4/0x18c
>>> [  552.342121]        do_dentry_open+0x208/0x310
>>> [  552.346454]        path_openat+0x28c/0x944
>>> [  552.350526]        do_filp_open+0x60/0xc4
>>> [  552.354512]        do_sys_open+0x118/0x1c8
>>> [  552.358586]        ret_fast_syscall+0x0/0x28
>>> [  552.362830]
>>>                -> #0 (&dev->mfc_mutex){+.+.}:
>>>                -> #0 (&dev->mfc_mutex){+.+.}:
>>> [  552.368379]        lock_acquire+0x6c/0x88
>>> [  552.372364]        __mutex_lock+0x68/0xa34
>>> [  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
>>> [  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
>>> [  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
>>> [  552.391601]        mmap_region+0x3a8/0x638
>>> [  552.395673]        do_mmap+0x330/0x3a4
>>> [  552.399400]        vm_mmap_pgoff+0x90/0xb8
>>> [  552.403472]        SyS_mmap_pgoff+0x90/0xc0
>>> [  552.407632]        ret_fast_syscall+0x0/0x28
>>> [  552.411876]
>>>                other info that might help us debug this:
>>>
>>> [  552.419848] Chain exists of:
>>>                  &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem
>>>
>>> [  552.431200]  Possible unsafe locking scenario:
>>>
>>> [  552.437092]        CPU0                    CPU1
>>> [  552.441598]        ----                    ----
>>> [  552.446104]   lock(&mm->mmap_sem);
>>> [  552.449484]                                lock(&type->i_mutex_dir_key#2);
>>> [  552.456329]                                lock(&mm->mmap_sem);
>>> [  552.462222]   lock(&dev->mfc_mutex);
>>> [  552.465775]
>>>                 *** DEADLOCK ***
>>
>> I am not 100% but it looks like false positive. Could you describe
>> scenario when it deadlocks?
>>
>>>
>>> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
>>> ---
>>>  drivers/media/platform/s5p-mfc/s5p_mfc.c        | 4 ++++
>>>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
>>>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 5 +++++
>>>  3 files changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
>>> index 1afde50..4c253fb 100644
>>> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
>>> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
>>> @@ -1315,6 +1315,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
>>>              goto err_dma;
>>>      }
>>>
>>> +    ret = s5p_mfc_load_firmware(dev);
>>> +    if (ret)
>>> +            mfc_err("Failed to load FW - try loading from open()\n");
>>> +
>>
>> What is the point of adding it? It will produce error log in case
>> filesystem is not yet mounted, and as I remember it was the reason to
>> put fw load to open callback.
>
> "What is the point of adding it" does it mean the error message or the
> attempt to load the firmware. Would it be okay to just try to load and
> not print error if it fails? If it works at this stage, _open() doesn't
> have to take time hit trying to load it.
>
> thanks,
> -- Shuah
>

[PATCH 2/2] media: s5p-mfc: fix lock confection - request_firmware() once and keep state

[Shuah Khan]

On 11/02/2017 06:43 PM, Marian Mihailescu wrote:
> I can confirm, with this patch, there is always error loading MFC in
> boot log, since FS is not mounted.
> 
> -Marian
> 

Please refrain from top posting to a kernel email threads. It is very difficult
to follow. Bottom post is the norm.

thanks,
-- Shuah