From: geert@linux-m68k.org (Geert Uytterhoeven)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion
Date: Fri, 29 Jan 2016 16:52:06 +0100 [thread overview]
Message-ID: <CAMuHMdU0d83hvMhr1KyQfdms636qph4mYZ7Q+v3r7d35FHzw1A@mail.gmail.com> (raw)
In-Reply-To: <1421847492-8857-2-git-send-email-lars@metafoo.de>
On Wed, Jan 21, 2015 at 2:38 PM, Lars-Peter Clausen <lars@metafoo.de> wrote:
> According to the sh7724 hardware user manual (Rev.2.00 Jan 2013) page 1851
> to 1856 the FSI bit-clock is inverted to the bit-clock as specified by the
> I2S standard. This means the bit clock inversion bit should be set for a
> normal I2S clock and should not be set for an inverted I2S clock.
>
> Similarly when operating in left-justfied mode both the frame-clock and the
> bit-clock need to be inverted to be standards compliant.
>
> This means also that the exta clock inversion setting in the armadillo800eva
> machine driver for CPU component should now be removed.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> I don't have the hardware but I'd like to get rid of the extra
> SND_SOC_DAIFMT_IB_NF in simple-card platform data, so we can remove the fmt
> field. Kuninori can you check if this works?
>
> Changes since v1:
> * Fix whitespace
> ---
> arch/arm/mach-shmobile/board-armadillo800eva.c | 1 -
The board files are gone by now.
> sound/soc/sh/fsi.c | 7 +++++++
Is this part still applicable?
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 75de26c..36aaeb1 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -1015,7 +1015,6 @@ static struct asoc_simple_card_info fsi_wm8978_info = {
> .platform = "sh_fsi2",
> .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
> .cpu_dai = {
> - .fmt = SND_SOC_DAIFMT_IB_NF,
> .name = "fsia-dai",
> },
> .codec_dai = {
> diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
> index b87b22e..6783d3f 100644
> --- a/sound/soc/sh/fsi.c
> +++ b/sound/soc/sh/fsi.c
> @@ -1594,6 +1594,12 @@ static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
>
> static int fsi_set_fmt_dai(struct fsi_priv *fsi, unsigned int fmt)
> {
> + /*
> + * FSI bit clock is inverted to the I2S specification, so we invert it
> + * when a non-inverted I2S clock was requested and vice versa.
> + */
> + fsi->bit_clk_inv = !fsi->bit_clk_inv;
> +
> switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> case SND_SOC_DAIFMT_I2S:
> fsi->fmt = CR_I2S;
> @@ -1602,6 +1608,7 @@ static int fsi_set_fmt_dai(struct fsi_priv *fsi, unsigned int fmt)
> case SND_SOC_DAIFMT_LEFT_J:
> fsi->fmt = CR_PCM;
> fsi->chan_num = 2;
> + fsi->lr_clk_inv = !fsi->lr_clk_inv;
> break;
> default:
> return -EINVAL;
> --
> 1.8.0
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2016-01-29 15:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 13:38 [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Lars-Peter Clausen
2015-01-21 13:38 ` [PATCH v2 2/3] ASoC: sh: fsi: Fix clock inversion Lars-Peter Clausen
2016-01-29 15:52 ` Geert Uytterhoeven [this message]
2015-01-21 13:38 ` [PATCH v2 3/3] ASoC: simple-card: Remove support for setting differing DAI formats Lars-Peter Clausen
2015-01-27 0:58 ` [PATCH v2 1/3] ARM: shmobile: armadillo800eva: Properly specify HDMI audio link format Simon Horman
2015-01-27 7:40 ` Kuninori Morimoto
2015-01-27 8:19 ` Lars-Peter Clausen
2015-01-27 23:52 ` Kuninori Morimoto
2015-01-30 1:25 ` Simon Horman
2015-01-30 5:18 ` Kuninori Morimoto
2015-02-11 0:28 ` Simon Horman
2015-02-27 0:23 ` Kuninori Morimoto
2015-03-22 18:52 ` Mark Brown
2015-03-23 7:00 ` Kuninori Morimoto
2015-03-23 21:12 ` Mark Brown
2015-03-24 0:07 ` Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAMuHMdU0d83hvMhr1KyQfdms636qph4mYZ7Q+v3r7d35FHzw1A@mail.gmail.com \
--to=geert@linux-m68k.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).