[PATCH] arm64: dts: renesas: r8a77990-ebisu: sort nodes

* [PATCH] arm64: dts: renesas: r8a77990-ebisu: sort nodes
@ 2019-08-01 14:24 Yoshihiro Kaneko
  2019-08-05 15:42 ` Geert Uytterhoeven
  0 siblings, 1 reply; 2+ messages in thread
From: Yoshihiro Kaneko @ 2019-08-01 14:24 UTC (permalink / raw)
  To: linux-renesas-soc
  Cc: Magnus Damm, Simon Horman, Geert Uytterhoeven, linux-arm-kernel

Sort nodes.

If node address is present
   * Sort by node address, grouping all nodes with the same compat string
     and sorting the group alphabetically.
Else
   * Sort alphabetically

This should not have any run-time effect.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---

This patch is based on the master branch of Geert Uytterhoeven's renesas-devel
tree.

 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 202 ++++++++++++-------------
 1 file changed, 101 insertions(+), 101 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 83fc13a..69ef43b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -23,12 +23,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
 	audio_clkout: audio-clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -107,36 +101,10 @@
 		};
 	};
 
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
 
 	reg_1p8v: regulator0 {
@@ -157,15 +125,13 @@
 		regulator-always-on;
 	};
 
-	vbus0_usb2: regulator-vbus0-usb2 {
+	reg_12p0v: regulator2 {
 		compatible = "regulator-fixed";
-
-		regulator-name = "USB20_VBUS_CN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	rsnd_ak4613: sound {
@@ -185,25 +151,15 @@
 		};
 	};
 
-	x12_clk: x12 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	reg_12p0v: regulator2 {
+	vbus0_usb2: regulator-vbus0-usb2 {
 		compatible = "regulator-fixed";
-		regulator-name = "D12.0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
 
-	x13_clk: x13 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
+		regulator-name = "USB20_VBUS_CN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	vcc_sdhi0: regulator-vcc-sdhi0 {
@@ -253,6 +209,50 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &audio_clk_a {
@@ -547,6 +547,11 @@
 		function = "pwm5";
 	};
 
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -577,20 +582,15 @@
 		power-source = <1800>;
 	};
 
-	sound_pins: sound {
-		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
 	sound_clk_pins: sound_clk {
 		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
 			 "audio_clkout_a", "audio_clkout1_a";
 		function = "audio_clk";
 	};
 
-	scif2_pins: scif2 {
-		groups = "scif2_data_a";
-		function = "scif2";
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
 	};
 
 	usb0_pins: usb {
@@ -671,38 +671,6 @@
 	status = "okay";
 };
 
-&ssi1 {
-	shared-pin;
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	vbus-supply = <&vbus0_usb2>;
-	status = "okay";
-};
-
-&usb3_peri0 {
-	companion = <&xhci0>;
-	status = "okay";
-};
-
-&vin4 {
-	status = "okay";
-};
-
-&vin5 {
-	status = "okay";
-};
-
-&xhci0 {
-	pinctrl-0 = <&usb30_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-1 = <&sdhi0_pins_uhs>;
@@ -746,3 +714,35 @@
 	non-removable;
 	status = "okay";
 };
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
-- 
1.9.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 2+ messages in thread