From: chander.kashyap@linaro.org (Chander Kashyap)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: DT: Exynos: fix number of interrupt-cells in mct node
Date: Tue, 23 Jul 2013 15:17:58 +0530 [thread overview]
Message-ID: <CANuQgHH+nebJf4HPrsWPLECyvWO8OGJj=YeDG4GQAmLHM8GrPw@mail.gmail.com> (raw)
In-Reply-To: <1371220886-11616-1-git-send-email-chander.kashyap@linaro.org>
ping.
On 14 June 2013 20:11, Chander Kashyap <chander.kashyap@linaro.org> wrote:
> Two cells were used to specify interrupts in mct node, while second cell
> always remains unused. Hence use only one cell.
> Suggested by Tomasz Figa.
>
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++----------
> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++----------
> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------
> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++----------
> 4 files changed, 38 insertions(+), 42 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index 54710de..ad50010 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -52,23 +52,22 @@
> compatible = "samsung,exynos4210-mct";
> reg = <0x10050000 0x800>;
> interrupt-controller;
> - #interrups-cells = <2>;
> + #interrups-cells = <1>;
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> clocks = <&clock 3>, <&clock 344>;
> clock-names = "fin_pll", "mct";
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> #address-cells = <0>;
> #size-cells = <0>;
> - interrupt-map = <0x0 0 &gic 0 57 0>,
> - <0x1 0 &gic 0 69 0>,
> - <0x2 0 &combiner 12 6>,
> - <0x3 0 &combiner 12 7>,
> - <0x4 0 &gic 0 42 0>,
> - <0x5 0 &gic 0 48 0>;
> + interrupt-map = <0 &gic 0 57 0>,
> + <1 &gic 0 69 0>,
> + <2 &combiner 12 6>,
> + <3 &combiner 12 7>,
> + <4 &gic 0 42 0>,
> + <5 &gic 0 48 0>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
> index c0f60f4..ba9ada1 100644
> --- a/arch/arm/boot/dts/exynos4212.dtsi
> +++ b/arch/arm/boot/dts/exynos4212.dtsi
> @@ -39,21 +39,20 @@
> compatible = "samsung,exynos4412-mct";
> reg = <0x10050000 0x800>;
> interrupt-controller;
> - #interrups-cells = <2>;
> + #interrups-cells = <1>;
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <>;
> #address-cells = <0>;
> #size-cells = <0>;
> - interrupt-map = <0x0 0 &gic 0 57 0>,
> - <0x1 0 &combiner 12 5>,
> - <0x2 0 &combiner 12 6>,
> - <0x3 0 &combiner 12 7>,
> - <0x4 0 &gic 1 12 0>,
> - <0x5 0 &gic 1 12 0>;
> + interrupt-map = <0 &gic 0 57 0>,
> + <1 &combiner 12 5>,
> + <2 &combiner 12 6>,
> + <3 &combiner 12 7>,
> + <4 &gic 1 12 0>,
> + <5 &gic 1 12 0>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index 270b389..a680de7 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -39,25 +39,24 @@
> compatible = "samsung,exynos4412-mct";
> reg = <0x10050000 0x800>;
> interrupt-controller;
> - #interrups-cells = <2>;
> + #interrups-cells = <1>;
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>, <6 0>, <7 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>;
> clocks = <&clock 3>, <&clock 344>;
> clock-names = "fin_pll", "mct";
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> #address-cells = <0>;
> #size-cells = <0>;
> - interrupt-map = <0x0 0 &gic 0 57 0>,
> - <0x1 0 &combiner 12 5>,
> - <0x2 0 &combiner 12 6>,
> - <0x3 0 &combiner 12 7>,
> - <0x4 0 &gic 1 12 0>,
> - <0x5 0 &gic 1 12 0>,
> - <0x6 0 &gic 1 12 0>,
> - <0x7 0 &gic 1 12 0>;
> + interrupt-map = <0 &gic 0 57 0>,
> + <1 &combiner 12 5>,
> + <2 &combiner 12 6>,
> + <3 &combiner 12 7>,
> + <4 &gic 1 12 0>,
> + <5 &gic 1 12 0>,
> + <6 &gic 1 12 0>,
> + <7 &gic 1 12 0>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index a7cf3f5..4e633ef 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -94,23 +94,22 @@
> compatible = "samsung,exynos4210-mct";
> reg = <0x101C0000 0x800>;
> interrupt-controller;
> - #interrups-cells = <2>;
> + #interrups-cells = <1>;
> interrupt-parent = <&mct_map>;
> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
> - <4 0>, <5 0>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> clocks = <&clock 1>, <&clock 335>;
> clock-names = "fin_pll", "mct";
>
> mct_map: mct-map {
> - #interrupt-cells = <2>;
> + #interrupt-cells = <1>;
> #address-cells = <0>;
> #size-cells = <0>;
> - interrupt-map = <0x0 0 &combiner 23 3>,
> - <0x1 0 &combiner 23 4>,
> - <0x2 0 &combiner 25 2>,
> - <0x3 0 &combiner 25 3>,
> - <0x4 0 &gic 0 120 0>,
> - <0x5 0 &gic 0 121 0>;
> + interrupt-map = <0 &combiner 23 3>,
> + <1 &combiner 23 4>,
> + <2 &combiner 25 2>,
> + <3 &combiner 25 3>,
> + <4 &gic 0 120 0>,
> + <5 &gic 0 121 0>;
> };
> };
>
> --
> 1.7.9.5
>
--
with warm regards,
Chander Kashyap
next prev parent reply other threads:[~2013-07-23 9:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-14 14:41 [PATCH] ARM: DT: Exynos: fix number of interrupt-cells in mct node Chander Kashyap
2013-07-23 9:47 ` Chander Kashyap [this message]
2013-08-12 6:23 ` Chander Kashyap
2013-08-18 19:27 ` Kukjin Kim
2013-08-28 9:50 ` Chander Kashyap
2013-08-28 10:31 ` Tomasz Figa
2013-08-28 10:48 ` Chander Kashyap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANuQgHH+nebJf4HPrsWPLECyvWO8OGJj=YeDG4GQAmLHM8GrPw@mail.gmail.com' \
--to=chander.kashyap@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).