From mboxrd@z Thu Jan  1 00:00:00 1970
From: hector.oron@gmail.com (Hector Oron)
Date: Thu, 22 Sep 2011 10:30:33 +0100
Subject: [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53
	platforms
In-Reply-To: <CAMPhdO-f2RHtZ0RdV_wGZvohMT85Q3JzTePaD9w73shGpWkP6g@mail.gmail.com>
References: <1314698171-7937-1-git-send-email-richard.zhu@linaro.org>
	<CAODfWeEm8bkySXxb1qopbH1VMu-V+33k5x+0+qjABzesT0amOA@mail.gmail.com>
	<CAJNCFV+XFGEba1J2dXDa4YVwqduAPV5y=5JYEXAZ0uv+S60vvw@mail.gmail.com>
	<CAODfWeEueF45_yvPV5Zxbva6K2gEfKZbY2qoqySYFPZWnSgLsg@mail.gmail.com>
	<CAJNCFVLP7gA_7vBjwVNkQaSg8LZ4hROLdNCx8SBVah=F1ptrhQ@mail.gmail.com>
	<CAODfWeHTRuFZtnYZOD-mFonyjBvjhid4=0=a_mYXdjXAOQYejA@mail.gmail.com>
	<CAMPhdO-f2RHtZ0RdV_wGZvohMT85Q3JzTePaD9w73shGpWkP6g@mail.gmail.com>
Message-ID: <CAODfWeFPwUa++=Bz6503KJS9dNhmkjNuWF_g==MaFKydqRRX3A@mail.gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello,

  Apologies for late reply.

2011/9/6 Eric Miao <eric.miao@linaro.org>:
> On Tue, Sep 6, 2011 at 1:46 AM, Hector Oron <hector.oron@gmail.com> wrote:
>> 2011/9/1 Richard Zhu <richard.zhu@linaro.org>:

>> Here is my complete dmesg. The system seems to work fine, it is a
>> 1.0TB WD10TPVT SATA disk in a case which provides eSATA and connected
>> to mx53 LOCO with eSATA-to-SATA cable.

> Is it possible that it's caused by this converter? Do you have a separate
> SATA power supply that could help test the disk directly connected to
> mx53loco?

I think I had a bad configuration setup for my kernel. I have rebuilt
3.1.0-rc6 from Sascha's master git with this patches and now SATA is
working properly I do not see any issue as I did. So, from my side all
is OK now, and I assume I had some missing or conflicting module
setup.

Kind regards and apologies for inconveniences,
-- 
?H?ctor Or?n ?-.. . -... .. .- -. ? -.. . ...- . .-.. --- .--. . .-.