[PATCH V2 2/4] arm64: dts: imx: add imx8qxp support

[festevam@gmail.com (Fabio Estevam)]

Hi Dong,

On Sun, Oct 14, 2018 at 11:35 AM A.s. Dong <aisheng.dong@nxp.com> wrote:
>
> Add imx8qxp support

You could probably expand the commit log by explaining a bit of what
im8qxp means.

> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> new file mode 100644
> index 0000000..e1d2578
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -0,0 +1,861 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.
> + * Copyright 2017~2018 NXP

I guess you meant "-" instead of "~".

> +       memory at 80000000 {
> +               device_type = "memory";
> +               reg = <0x00000000 0x80000000 0 0x40000000>;
> +       };

This should go to the board dts file instead as the memory size may
vary from board to board.

> +               imx8qx-pm {
> +                       compatible = "fsl,scu-pd";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       pd_lsio: lsio-power-domain {
> +                               #power-domain-cells = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               pd_lsio_pwm0: lsio-pwm0 at 191 {
> +                                       reg = <191>;

The number after @ is in hex, so the reg property should be 0x191.