[PATCH v5 1/5] clk: Introduce devm_clk_hw_register_gate_parent_data()

[PATCH v5 1/5] clk: Introduce devm_clk_hw_register_gate_parent_data()

[Marek Vasut]

Add an API for clock gate that uses parent_data for the parent instead of
a string parent_name.

Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V3: New patch
V4: - Rebase on next 20230223
V5: Add TB from Adam and Alexander
---
 include/linux/clk-provider.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 842e72a5348fa..92b7c794c6272 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -608,6 +608,25 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	__devm_clk_hw_register_gate((dev), NULL, (name), (parent_name), NULL, \
 			       NULL, (flags), (reg), (bit_idx),		      \
 			       (clk_gate_flags), (lock))
+
+/**
+ * devm_clk_hw_register_gate - register a gate clock with the clock framework
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_data: parent clk data
+ * @flags: framework-specific flags for this clock
+ * @reg: register address to control gating of this clock
+ * @bit_idx: which bit in the register controls gating of this clock
+ * @clk_gate_flags: gate-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+#define devm_clk_hw_register_gate_parent_data(dev, name, parent_data, flags,  \
+					      reg, bit_idx, clk_gate_flags,   \
+					      lock)			      \
+	__devm_clk_hw_register_gate((dev), NULL, (name), NULL, NULL,	      \
+				    (parent_data), (flags), (reg), (bit_idx), \
+				    (clk_gate_flags), (lock))
+
 void clk_unregister_gate(struct clk *clk);
 void clk_hw_unregister_gate(struct clk_hw *hw);
 int clk_gate_is_enabled(struct clk_hw *hw);
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/5] clk: imx: imx8mp: Add audiomix block control

[Marek Vasut]

Unlike the other block control IPs in i.MX8M, the audiomix is mostly a
series of clock gates and muxes. Model it as a large static table of
gates and muxes with one exception, which is the PLL14xx . The PLL14xx
SAI PLL has to be registered separately.

Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: No change
V3: - Use devm_platform_ioremap_resource
    - Use clk_hw_onecell_data instead of clk_imx8mp_audiomix_priv
    - Include mod_devicetable.h for of_device_id struct
    - Use struct clk_parent_data instead of string parent_name
V4: - Fix SAI_MCLK_SEL offset as pointed out by Marco
    - Add TB from Luca
    - Use devm_clk_hw_register_mux_parent_data_table() and drop
      custom devm_clk_hw_register_mux_parent_data() patch, tweak
      the indent to be less hideous
    - Rebase on next 20230223
V5: Add TB from Adam and Alexander
---
 drivers/clk/imx/Makefile              |   2 +-
 drivers/clk/imx/clk-imx8mp-audiomix.c | 277 ++++++++++++++++++++++++++
 2 files changed, 278 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-imx8mp-audiomix.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index a75d59f7cb8a6..ae9d84ef046ba 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o
 
 obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
 obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o
-obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-imx8mp-audiomix.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_CLK_IMX93) += clk-imx93.o
diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c
new file mode 100644
index 0000000000000..e4300df88f1ac
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for i.MX8M Plus Audio BLK_CTRL
+ *
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+#include "clk.h"
+
+#define CLKEN0			0x000
+#define CLKEN1			0x004
+#define SAI_MCLK_SEL(n)		(0x300 + 4 * (n))	/* n in 0..5 */
+#define PDM_SEL			0x318
+#define SAI_PLL_GNRL_CTL	0x400
+
+#define SAIn_MCLK1_PARENT(n)						\
+static const struct clk_parent_data					\
+clk_imx8mp_audiomix_sai##n##_mclk1_parents[] = {			\
+	{								\
+		.fw_name = "sai"__stringify(n),				\
+		.name = "sai"__stringify(n)				\
+	}, {								\
+		.fw_name = "sai"__stringify(n)"_mclk",			\
+		.name = "sai"__stringify(n)"_mclk"			\
+	},								\
+}
+
+SAIn_MCLK1_PARENT(1);
+SAIn_MCLK1_PARENT(2);
+SAIn_MCLK1_PARENT(3);
+SAIn_MCLK1_PARENT(5);
+SAIn_MCLK1_PARENT(6);
+SAIn_MCLK1_PARENT(7);
+
+static const struct clk_parent_data clk_imx8mp_audiomix_sai_mclk2_parents[] = {
+	{ .fw_name = "sai1", .name = "sai1" },
+	{ .fw_name = "sai2", .name = "sai2" },
+	{ .fw_name = "sai3", .name = "sai3" },
+	{ .name = "dummy" },
+	{ .fw_name = "sai5", .name = "sai5" },
+	{ .fw_name = "sai6", .name = "sai6" },
+	{ .fw_name = "sai7", .name = "sai7" },
+	{ .fw_name = "sai1_mclk", .name = "sai1_mclk" },
+	{ .fw_name = "sai2_mclk", .name = "sai2_mclk" },
+	{ .fw_name = "sai3_mclk", .name = "sai3_mclk" },
+	{ .name = "dummy" },
+	{ .fw_name = "sai5_mclk", .name = "sai5_mclk" },
+	{ .fw_name = "sai6_mclk", .name = "sai6_mclk" },
+	{ .fw_name = "sai7_mclk", .name = "sai7_mclk" },
+	{ .fw_name = "spdif_extclk", .name = "spdif_extclk" },
+	{ .name = "dummy" },
+};
+
+static const struct clk_parent_data clk_imx8mp_audiomix_pdm_parents[] = {
+	{ .fw_name = "pdm", .name = "pdm" },
+	{ .name = "sai_pll_out_div2" },
+	{ .fw_name = "sai1_mclk", .name = "sai1_mclk" },
+	{ .name = "dummy" },
+};
+
+
+static const struct clk_parent_data clk_imx8mp_audiomix_pll_parents[] = {
+	{ .fw_name = "osc_24m", .name = "osc_24m" },
+	{ .name = "dummy" },
+	{ .name = "dummy" },
+	{ .name = "dummy" },
+};
+
+static const struct clk_parent_data clk_imx8mp_audiomix_pll_bypass_sels[] = {
+	{ .fw_name = "sai_pll", .name = "sai_pll" },
+	{ .fw_name = "sai_pll_ref_sel", .name = "sai_pll_ref_sel" },
+};
+
+#define CLK_GATE(gname, cname)						\
+	{								\
+		gname"_cg",						\
+		IMX8MP_CLK_AUDIOMIX_##cname,				\
+		{ .fw_name = "ahb", .name = "ahb" }, NULL, 1,		\
+		CLKEN0 + 4 * !!(IMX8MP_CLK_AUDIOMIX_##cname / 32),	\
+		1, IMX8MP_CLK_AUDIOMIX_##cname % 32			\
+	}
+
+#define CLK_SAIn(n)							\
+	{								\
+		"sai"__stringify(n)"_mclk1_sel",			\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK1_SEL, {},		\
+		clk_imx8mp_audiomix_sai##n##_mclk1_parents,		\
+		ARRAY_SIZE(clk_imx8mp_audiomix_sai##n##_mclk1_parents), \
+		SAI_MCLK_SEL(n), 1, 0					\
+	}, {								\
+		"sai"__stringify(n)"_mclk2_sel",			\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK2_SEL, {},		\
+		clk_imx8mp_audiomix_sai_mclk2_parents,			\
+		ARRAY_SIZE(clk_imx8mp_audiomix_sai_mclk2_parents),	\
+		SAI_MCLK_SEL(n), 4, 1					\
+	}, {								\
+		"sai"__stringify(n)"_ipg_cg",				\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_IPG,			\
+		{ .fw_name = "ahb", .name = "ahb" }, NULL, 1,		\
+		CLKEN0, 1, IMX8MP_CLK_AUDIOMIX_SAI##n##_IPG		\
+	}, {								\
+		"sai"__stringify(n)"_mclk1_cg",				\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK1,			\
+		{							\
+			.fw_name = "sai"__stringify(n)"_mclk1_sel",	\
+			.name = "sai"__stringify(n)"_mclk1_sel"		\
+		}, NULL, 1,						\
+		CLKEN0, 1, IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK1		\
+	}, {								\
+		"sai"__stringify(n)"_mclk2_cg",				\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK2,			\
+		{							\
+			.fw_name = "sai"__stringify(n)"_mclk2_sel",	\
+			.name = "sai"__stringify(n)"_mclk2_sel"		\
+		}, NULL, 1,						\
+		CLKEN0, 1, IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK2		\
+	}, {								\
+		"sai"__stringify(n)"_mclk3_cg",				\
+		IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK3,			\
+		{							\
+			.fw_name = "sai_pll_out_div2",			\
+			.name = "sai_pll_out_div2"			\
+		}, NULL, 1,						\
+		CLKEN0, 1, IMX8MP_CLK_AUDIOMIX_SAI##n##_MCLK3		\
+	}
+
+#define CLK_PDM								\
+	{								\
+		"pdm_sel", IMX8MP_CLK_AUDIOMIX_PDM_SEL, {},		\
+		clk_imx8mp_audiomix_pdm_parents,			\
+		ARRAY_SIZE(clk_imx8mp_audiomix_pdm_parents),		\
+		PDM_SEL, 2, 0						\
+	}
+
+struct clk_imx8mp_audiomix_sel {
+	const char			*name;
+	int				clkid;
+	const struct clk_parent_data	parent;		/* For gate */
+	const struct clk_parent_data	*parents;	/* For mux */
+	int				num_parents;
+	u16				reg;
+	u8				width;
+	u8				shift;
+};
+
+static struct clk_imx8mp_audiomix_sel sels[] = {
+	CLK_GATE("asrc", ASRC_IPG),
+	CLK_GATE("pdm", PDM_IPG),
+	CLK_GATE("earc", EARC_IPG),
+	CLK_GATE("ocrama", OCRAMA_IPG),
+	CLK_GATE("aud2htx", AUD2HTX_IPG),
+	CLK_GATE("earc_phy", EARC_PHY),
+	CLK_GATE("sdma2", SDMA2_ROOT),
+	CLK_GATE("sdma3", SDMA3_ROOT),
+	CLK_GATE("spba2", SPBA2_ROOT),
+	CLK_GATE("dsp", DSP_ROOT),
+	CLK_GATE("dspdbg", DSPDBG_ROOT),
+	CLK_GATE("edma", EDMA_ROOT),
+	CLK_GATE("audpll", AUDPLL_ROOT),
+	CLK_GATE("mu2", MU2_ROOT),
+	CLK_GATE("mu3", MU3_ROOT),
+	CLK_PDM,
+	CLK_SAIn(1),
+	CLK_SAIn(2),
+	CLK_SAIn(3),
+	CLK_SAIn(5),
+	CLK_SAIn(6),
+	CLK_SAIn(7)
+};
+
+static int clk_imx8mp_audiomix_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *priv;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct clk_hw *hw;
+	int i;
+
+	priv = devm_kzalloc(dev,
+			    struct_size(priv, hws, IMX8MP_CLK_AUDIOMIX_END),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->num = IMX8MP_CLK_AUDIOMIX_END;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = 0; i < ARRAY_SIZE(sels); i++) {
+		if (sels[i].num_parents == 1) {
+			hw = devm_clk_hw_register_gate_parent_data(dev,
+				sels[i].name, &sels[i].parent, 0,
+				base + sels[i].reg, sels[i].shift, 0, NULL);
+		} else {
+			hw = devm_clk_hw_register_mux_parent_data_table(dev,
+				sels[i].name, sels[i].parents,
+				sels[i].num_parents, 0,
+				base + sels[i].reg,
+				sels[i].shift, sels[i].width,
+				0, NULL, NULL);
+		}
+
+		if (IS_ERR(hw))
+			return PTR_ERR(hw);
+
+		priv->hws[sels[i].clkid] = hw;
+	}
+
+	/* SAI PLL */
+	hw = devm_clk_hw_register_mux_parent_data_table(dev,
+		"sai_pll_ref_sel", clk_imx8mp_audiomix_pll_parents,
+		ARRAY_SIZE(clk_imx8mp_audiomix_pll_parents),
+		CLK_SET_RATE_NO_REPARENT, base + SAI_PLL_GNRL_CTL,
+		0, 2, 0, NULL, NULL);
+	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL] = hw;
+
+	hw = imx_dev_clk_hw_pll14xx(dev, "sai_pll", "sai_pll_ref_sel",
+				    base + 0x400, &imx_1443x_pll);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL] = hw;
+
+	hw = devm_clk_hw_register_mux_parent_data_table(dev,
+		"sai_pll_bypass", clk_imx8mp_audiomix_pll_bypass_sels,
+		ARRAY_SIZE(clk_imx8mp_audiomix_pll_bypass_sels),
+		CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+		base + SAI_PLL_GNRL_CTL, 16, 1, 0, NULL, NULL);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS] = hw;
+
+	hw = devm_clk_hw_register_gate(dev, "sai_pll_out", "sai_pll_bypass",
+				       0, base + SAI_PLL_GNRL_CTL, 13,
+				       0, NULL);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	priv->hws[IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT] = hw;
+
+	hw = devm_clk_hw_register_fixed_factor(dev, "sai_pll_out_div2",
+					       "sai_pll_out", 0, 1, 2);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get,
+					   priv);
+}
+
+static const struct of_device_id clk_imx8mp_audiomix_of_match[] = {
+	{ .compatible = "fsl,imx8mp-audio-blk-ctrl" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, clk_imx8mp_audiomix_of_match);
+
+static struct platform_driver clk_imx8mp_audiomix_driver = {
+	.probe	= clk_imx8mp_audiomix_probe,
+	.driver = {
+		.name = "imx8mp-audio-blk-ctrl",
+		.of_match_table = clk_imx8mp_audiomix_of_match,
+	},
+};
+
+module_platform_driver(clk_imx8mp_audiomix_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Freescale i.MX8MP Audio Block Controller driver");
+MODULE_LICENSE("GPL");
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/5] clk: imx: imx8mp: Add audiomix block control

[Fabio Estevam]

On Mon, Feb 27, 2023 at 2:43 PM Marek Vasut <marex@denx.de> wrote:
>
> Unlike the other block control IPs in i.MX8M, the audiomix is mostly a
> series of clock gates and muxes. Model it as a large static table of
> gates and muxes with one exception, which is the PLL14xx . The PLL14xx
> SAI PLL has to be registered separately.
>
> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/5] dt-bindings: clock: imx8mp: Add audiomix block control

[Marek Vasut]

Unlike the other block control IPs in i.MX8M, the audiomix is mostly a
series of clock gates and muxes. Add DT bindings for this IP.

Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: No change
V3: - Add missed RB from Rob from V1
    - Rename audio_ahb to plain ahb
V4: - Rebase on next 20230223
V5: Add TB from Adam and Alexander
---
 .../bindings/clock/imx8mp-audiomix.yaml       | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
new file mode 100644
index 0000000000000..01b4e1e311cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP AudioMIX Block Control Binding
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-audio-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  power-domain-names:
+    const: audio
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: sai1
+      - const: sai2
+      - const: sai3
+      - const: sai5
+      - const: sai6
+      - const: sai7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    clock-controller@30e20000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx8mp-audio-blk-ctrl";
+        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+                 <&clk IMX8MP_CLK_SAI1>,
+                 <&clk IMX8MP_CLK_SAI2>,
+                 <&clk IMX8MP_CLK_SAI3>,
+                 <&clk IMX8MP_CLK_SAI5>,
+                 <&clk IMX8MP_CLK_SAI6>,
+                 <&clk IMX8MP_CLK_SAI7>;
+        clock-names = "ahb",
+                      "sai1", "sai2", "sai3",
+                      "sai5", "sai6", "sai7";
+        power-domains = <&pgc_audio>;
+        power-domain-names = "audio";
+        reg = <0x30e20000 0x10000>;
+    };
+
+...
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 3/5] dt-bindings: clock: imx8mp: Add audiomix block control

[Fabio Estevam]

On Mon, Feb 27, 2023 at 2:43 PM Marek Vasut <marex@denx.de> wrote:
>
> Unlike the other block control IPs in i.MX8M, the audiomix is mostly a
> series of clock gates and muxes. Add DT bindings for this IP.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 3/5] dt-bindings: clock: imx8mp: Add audiomix block control

[Marco Felsch]

Hi Marek,

sorry for the late review on this, please see below.

On 23-02-27, Marek Vasut wrote:
> Unlike the other block control IPs in i.MX8M, the audiomix is mostly a
> series of clock gates and muxes. Add DT bindings for this IP.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Abel Vesa <abelvesa@kernel.org>
> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Jacky Bai <ping.bai@nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-clk@vger.kernel.org
> ---
> V2: No change
> V3: - Add missed RB from Rob from V1
>     - Rename audio_ahb to plain ahb
> V4: - Rebase on next 20230223
> V5: Add TB from Adam and Alexander
> ---
>  .../bindings/clock/imx8mp-audiomix.yaml       | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
> new file mode 100644
> index 0000000000000..01b4e1e311cef
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8MP AudioMIX Block Control Binding
> +
> +maintainers:
> +  - Marek Vasut <marex@denx.de>
> +
> +description: |
> +  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
> +  used to control Audio related clock on the SoC.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mp-audio-blk-ctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  power-domain-names:
> +    const: audio

Why do we need to specify the name here? We have just one power-domain,
so there should be no need to distinguish between them, or do I miss
something?

> +
> +  clocks:
> +    minItems: 7
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: ahb
> +      - const: sai1
> +      - const: sai2
> +      - const: sai3
> +      - const: sai5
> +      - const: sai6
> +      - const: sai7
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
> +      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - power-domain-names

We can drop the power-domain-names here as well.

> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    clock-controller@30e20000 {
> +        #clock-cells = <1>;
> +        compatible = "fsl,imx8mp-audio-blk-ctrl";
> +        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
> +                 <&clk IMX8MP_CLK_SAI1>,
> +                 <&clk IMX8MP_CLK_SAI2>,
> +                 <&clk IMX8MP_CLK_SAI3>,
> +                 <&clk IMX8MP_CLK_SAI5>,
> +                 <&clk IMX8MP_CLK_SAI6>,
> +                 <&clk IMX8MP_CLK_SAI7>;
> +        clock-names = "ahb",
> +                      "sai1", "sai2", "sai3",
> +                      "sai5", "sai6", "sai7";
> +        power-domains = <&pgc_audio>;
> +        power-domain-names = "audio";
> +        reg = <0x30e20000 0x10000>;

It is common to have have the compatible as the first property followed
by the reg property. We should change this here as well as in the
8mp.dtsi patch.

Regards,
  Marco

> +    };
> +
> +...
> -- 
> 2.39.2
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/5] arm64: dts: imx8mp: Add SAI, SDMA, AudioMIX

[Marek Vasut]

Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is
needed to get audio operational on i.MX8MP .

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: - Add AUDIO_AXI clock to audio gpc
    - Use IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT for SDMA2 IPG clock
V3: Rename audio_ahb to plain ahb
V4: - Add RB/TB from Luca
    - Rebase on next 20230223
V5: - Add TB from Adam and Alexander
    - Replace blk-ctrl@ with clock-controller@
    - Specify sound-dai-cells in sai nodes
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 159 ++++++++++++++++++++++
 1 file changed, 159 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 524b4ccfcc553..9d176f3181931 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -571,6 +571,13 @@ pgc_usb2_phy: power-domain@3 {
 						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
 					};
 
+					pgc_audio: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
+						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+					};
+
 					pgc_gpu2d: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MP_POWER_DOMAIN_GPU2D>;
@@ -1119,6 +1126,158 @@ opp-1000000000 {
 			};
 		};
 
+		aips5: bus@30c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30c00000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30c00000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				sai1: sai@30c10000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c10000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@30c20000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c20000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30c30000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c30000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30c50000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c50000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai6: sai@30c60000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c60000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai7: sai@30c80000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c80000 0x10000>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			sdma3: dma-controller@30e00000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e00000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@30e10000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e10000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			audio_blk_ctrl: clock-controller@30e20000 {
+				#clock-cells = <1>;
+				compatible = "fsl,imx8mp-audio-blk-ctrl";
+				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+					 <&clk IMX8MP_CLK_SAI1>,
+					 <&clk IMX8MP_CLK_SAI2>,
+					 <&clk IMX8MP_CLK_SAI3>,
+					 <&clk IMX8MP_CLK_SAI5>,
+					 <&clk IMX8MP_CLK_SAI6>,
+					 <&clk IMX8MP_CLK_SAI7>;
+				clock-names = "ahb",
+					      "sai1", "sai2", "sai3",
+					      "sai5", "sai6", "sai7";
+				power-domains = <&pgc_audio>;
+				power-domain-names = "audio";
+				reg = <0x30e20000 0x10000>;
+			};
+		};
+
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/5] arm64: dts: imx8mp: Add SAI, SDMA, AudioMIX

[Fabio Estevam]

On Mon, Feb 27, 2023 at 2:43 PM Marek Vasut <marex@denx.de> wrote:
>
> Add all SAI nodes, SDMA2 and SDMA3 nodes, and AudioMIX node. This is
> needed to get audio operational on i.MX8MP .
>
> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
This is all that is needed to get analog audio output operational
on i.MX8MP EVK.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: No change
V3: No change
V4: - Update codec node name and phandle label
    - Use just sound for the sound node name
    - Rebase on next 20230223
V5: - Drop regulator-always-on from codec regulator
    - Add RB from Fabio
    - TB by Alexander added and removed again, since the patch was reworked
    - Switch to simple-audio-card
    - Add sound-dai-cells to codec node
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 74 ++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7816853162b3f..f2285ed9f70b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -40,6 +40,15 @@ pcie0_refclk: pcie0-refclk {
 		clock-frequency = <100000000>;
 	};
 
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";
@@ -83,6 +92,37 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8960-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"External Speaker", "SPK_LP",
+			"External Speaker", "SPK_LN",
+			"External Speaker", "SPK_RP",
+			"External Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8960>;
+		};
+
+	};
 };
 
 &flexspi {
@@ -344,6 +384,18 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	wm8960: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+	};
+
 	pca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
@@ -422,6 +474,16 @@ &pwm4 {
 	status = "okay";
 };
 
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marco Felsch]

Hi Marek,

thanks for switching to simple-audio-card :)

On 23-02-27, Marek Vasut wrote:
> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> This is all that is needed to get analog audio output operational
> on i.MX8MP EVK.
> 
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Abel Vesa <abelvesa@kernel.org>
> Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Jacky Bai <ping.bai@nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Richard Cochran <richardcochran@gmail.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-clk@vger.kernel.org
> ---
> V2: No change
> V3: No change
> V4: - Update codec node name and phandle label
>     - Use just sound for the sound node name
>     - Rebase on next 20230223
> V5: - Drop regulator-always-on from codec regulator
>     - Add RB from Fabio
>     - TB by Alexander added and removed again, since the patch was reworked
>     - Switch to simple-audio-card
>     - Add sound-dai-cells to codec node
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 74 ++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 7816853162b3f..f2285ed9f70b1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -40,6 +40,15 @@ pcie0_refclk: pcie0-refclk {
>  		clock-frequency = <100000000>;
>  	};
>  
> +	reg_audio_pwr: regulator-audio-pwr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "audio-pwr";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;

We should have a proper pinctrl setup for the regulator device.

> +	};
> +
>  	reg_can1_stby: regulator-can1-stby {
>  		compatible = "regulator-fixed";
>  		regulator-name = "can1-stby";
> @@ -83,6 +92,37 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
>  		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm8960-audio";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&cpudai>;
> +		simple-audio-card,bitclock-master = <&cpudai>;
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "External Speaker",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "HP_L",
> +			"Headphone Jack", "HP_R",
> +			"External Speaker", "SPK_LP",
> +			"External Speaker", "SPK_LN",
> +			"External Speaker", "SPK_RP",
> +			"External Speaker", "SPK_RN",
> +			"LINPUT1", "Mic Jack",
> +			"LINPUT3", "Mic Jack",
> +			"Mic Jack", "MICB";
> +
> +		cpudai: simple-audio-card,cpu {
> +			sound-dai = <&sai3>;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&wm8960>;
> +		};
> +
> +	};
>  };
>  
>  &flexspi {
> @@ -344,6 +384,18 @@ &i2c3 {
>  	pinctrl-0 = <&pinctrl_i2c3>;
>  	status = "okay";
>  
> +	wm8960: codec@1a {
> +		#sound-dai-cells = <0>;
> +		compatible = "wlf,wm8960";
> +		reg = <0x1a>;

The compatible should be the first property followed by the reg
property.

> +		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
> +		clock-names = "mclk";
> +		wlf,shared-lrclk;
> +		wlf,hp-cfg = <3 2 3>;
> +		wlf,gpio-cfg = <1 3>;
> +		SPKVDD1-supply = <&reg_audio_pwr>;
> +	};
> +
>  	pca6416: gpio@20 {
>  		compatible = "ti,tca6416";
>  		reg = <0x20>;
> @@ -422,6 +474,16 @@ &pwm4 {
>  	status = "okay";
>  };
>  
> +&sai3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai3>;
> +	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
>  		>;
>  	};
>  
> +	pinctrl_sai3: sai3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
> +			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
> +			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
> +			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
> +			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
> +			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6

What is gpio04-io28 used for?

> +			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
> +		>;
> +	};

Regards,
  Marco

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

On 2/27/23 19:59, Marco Felsch wrote:
[...]

>> @@ -344,6 +384,18 @@ &i2c3 {
>>   	pinctrl-0 = <&pinctrl_i2c3>;
>>   	status = "okay";
>>   
>> +	wm8960: codec@1a {
>> +		#sound-dai-cells = <0>;
>> +		compatible = "wlf,wm8960";
>> +		reg = <0x1a>;
> 
> The compatible should be the first property followed by the reg
> property.

See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
The rest is fixed in V6.

>> +		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
>> +		clock-names = "mclk";
>> +		wlf,shared-lrclk;
>> +		wlf,hp-cfg = <3 2 3>;
>> +		wlf,gpio-cfg = <1 3>;
>> +		SPKVDD1-supply = <&reg_audio_pwr>;
>> +	};
>> +
>>   	pca6416: gpio@20 {
>>   		compatible = "ti,tca6416";
>>   		reg = <0x20>;

[...]

>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
>>   		>;
>>   	};
>>   
>> +	pinctrl_sai3: sai3grp {
>> +		fsl,pins = <
>> +			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
>> +			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
>> +			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
>> +			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
>> +			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
>> +			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
> 
> What is gpio04-io28 used for?

Apparently unused, dropped.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Adam Ford]

On Mon, Feb 27, 2023 at 1:37 PM Marek Vasut <marex@denx.de> wrote:
>
> On 2/27/23 19:59, Marco Felsch wrote:
> [...]
>
> >> @@ -344,6 +384,18 @@ &i2c3 {
> >>      pinctrl-0 = <&pinctrl_i2c3>;
> >>      status = "okay";
> >>
> >> +    wm8960: codec@1a {
> >> +            #sound-dai-cells = <0>;
> >> +            compatible = "wlf,wm8960";
> >> +            reg = <0x1a>;
> >
> > The compatible should be the first property followed by the reg
> > property.
>
> See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
> The rest is fixed in V6.
>
> >> +            clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
> >> +            clock-names = "mclk";
> >> +            wlf,shared-lrclk;
> >> +            wlf,hp-cfg = <3 2 3>;
> >> +            wlf,gpio-cfg = <1 3>;
> >> +            SPKVDD1-supply = <&reg_audio_pwr>;
> >> +    };
> >> +
> >>      pca6416: gpio@20 {
> >>              compatible = "ti,tca6416";
> >>              reg = <0x20>;
>
> [...]
>
> >> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
> >>              >;
> >>      };
> >>
> >> +    pinctrl_sai3: sai3grp {
> >> +            fsl,pins = <
> >> +                    MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
> >> +                    MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
> >> +                    MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
> >> +                    MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
> >> +                    MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
> >> +                    MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28              0xd6
> >
> > What is gpio04-io28 used for?
>
> Apparently unused, dropped.

Isn't that the headphone detect GPIO?

I think simple-audio-card,hp-det-gpio can reference it.

adam

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

On 2/28/23 03:44, Adam Ford wrote:
> On Mon, Feb 27, 2023 at 1:37 PM Marek Vasut <marex@denx.de> wrote:
>>
>> On 2/27/23 19:59, Marco Felsch wrote:
>> [...]
>>
>>>> @@ -344,6 +384,18 @@ &i2c3 {
>>>>       pinctrl-0 = <&pinctrl_i2c3>;
>>>>       status = "okay";
>>>>
>>>> +    wm8960: codec@1a {
>>>> +            #sound-dai-cells = <0>;
>>>> +            compatible = "wlf,wm8960";
>>>> +            reg = <0x1a>;
>>>
>>> The compatible should be the first property followed by the reg
>>> property.
>>
>> See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
>> The rest is fixed in V6.
>>
>>>> +            clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
>>>> +            clock-names = "mclk";
>>>> +            wlf,shared-lrclk;
>>>> +            wlf,hp-cfg = <3 2 3>;
>>>> +            wlf,gpio-cfg = <1 3>;
>>>> +            SPKVDD1-supply = <&reg_audio_pwr>;
>>>> +    };
>>>> +
>>>>       pca6416: gpio@20 {
>>>>               compatible = "ti,tca6416";
>>>>               reg = <0x20>;
>>
>> [...]
>>
>>>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
>>>>               >;
>>>>       };
>>>>
>>>> +    pinctrl_sai3: sai3grp {
>>>> +            fsl,pins = <
>>>> +                    MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
>>>> +                    MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
>>>> +                    MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
>>>> +                    MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
>>>> +                    MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
>>>> +                    MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28              0xd6
>>>
>>> What is gpio04-io28 used for?
>>
>> Apparently unused, dropped.
> 
> Isn't that the headphone detect GPIO?
> 
> I think simple-audio-card,hp-det-gpio can reference it.

Per the schematics of the MX8MP EVK, the pin is not connected on the 
board-to-board connector EVK side, right ?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

On 2/28/23 07:43, Marek Vasut wrote:
> On 2/28/23 03:44, Adam Ford wrote:
>> On Mon, Feb 27, 2023 at 1:37 PM Marek Vasut <marex@denx.de> wrote:
>>>
>>> On 2/27/23 19:59, Marco Felsch wrote:
>>> [...]
>>>
>>>>> @@ -344,6 +384,18 @@ &i2c3 {
>>>>>       pinctrl-0 = <&pinctrl_i2c3>;
>>>>>       status = "okay";
>>>>>
>>>>> +    wm8960: codec@1a {
>>>>> +            #sound-dai-cells = <0>;
>>>>> +            compatible = "wlf,wm8960";
>>>>> +            reg = <0x1a>;
>>>>
>>>> The compatible should be the first property followed by the reg
>>>> property.
>>>
>>> See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
>>> The rest is fixed in V6.
>>>
>>>>> +            clocks = <&audio_blk_ctrl 
>>>>> IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
>>>>> +            clock-names = "mclk";
>>>>> +            wlf,shared-lrclk;
>>>>> +            wlf,hp-cfg = <3 2 3>;
>>>>> +            wlf,gpio-cfg = <1 3>;
>>>>> +            SPKVDD1-supply = <&reg_audio_pwr>;
>>>>> +    };
>>>>> +
>>>>>       pca6416: gpio@20 {
>>>>>               compatible = "ti,tca6416";
>>>>>               reg = <0x20>;
>>>
>>> [...]
>>>
>>>>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
>>>>>               >;
>>>>>       };
>>>>>
>>>>> +    pinctrl_sai3: sai3grp {
>>>>> +            fsl,pins = <
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
>>>>> +                    
>>>>> MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28              0xd6
>>>>
>>>> What is gpio04-io28 used for?
>>>
>>> Apparently unused, dropped.
>>
>> Isn't that the headphone detect GPIO?
>>
>> I think simple-audio-card,hp-det-gpio can reference it.
> 
> Per the schematics of the MX8MP EVK, the pin is not connected on the 
> board-to-board connector EVK side, right ?

Er, correction, that's AUD_NINT, which is WM8960 GPIO1 .

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Adam Ford]

On Tue, Feb 28, 2023 at 12:48 AM Marek Vasut <marex@denx.de> wrote:
>
> On 2/28/23 07:43, Marek Vasut wrote:
> > On 2/28/23 03:44, Adam Ford wrote:
> >> On Mon, Feb 27, 2023 at 1:37 PM Marek Vasut <marex@denx.de> wrote:
> >>>
> >>> On 2/27/23 19:59, Marco Felsch wrote:
> >>> [...]
> >>>
> >>>>> @@ -344,6 +384,18 @@ &i2c3 {
> >>>>>       pinctrl-0 = <&pinctrl_i2c3>;
> >>>>>       status = "okay";
> >>>>>
> >>>>> +    wm8960: codec@1a {
> >>>>> +            #sound-dai-cells = <0>;
> >>>>> +            compatible = "wlf,wm8960";
> >>>>> +            reg = <0x1a>;
> >>>>
> >>>> The compatible should be the first property followed by the reg
> >>>> property.
> >>>
> >>> See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
> >>> The rest is fixed in V6.
> >>>
> >>>>> +            clocks = <&audio_blk_ctrl
> >>>>> IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
> >>>>> +            clock-names = "mclk";
> >>>>> +            wlf,shared-lrclk;
> >>>>> +            wlf,hp-cfg = <3 2 3>;
> >>>>> +            wlf,gpio-cfg = <1 3>;
> >>>>> +            SPKVDD1-supply = <&reg_audio_pwr>;
> >>>>> +    };
> >>>>> +
> >>>>>       pca6416: gpio@20 {
> >>>>>               compatible = "ti,tca6416";
> >>>>>               reg = <0x20>;
> >>>
> >>> [...]
> >>>
> >>>>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
> >>>>>               >;
> >>>>>       };
> >>>>>
> >>>>> +    pinctrl_sai3: sai3grp {
> >>>>> +            fsl,pins = <
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
> >>>>> +
> >>>>> MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28              0xd6
> >>>>
> >>>> What is gpio04-io28 used for?
> >>>
> >>> Apparently unused, dropped.
> >>
> >> Isn't that the headphone detect GPIO?
> >>
> >> I think simple-audio-card,hp-det-gpio can reference it.
> >
> > Per the schematics of the MX8MP EVK, the pin is not connected on the
> > board-to-board connector EVK side, right ?
>
> Er, correction, that's AUD_NINT, which is WM8960 GPIO1 .

I only went by NXP's downstream device tree.  I didn't have the
schematics in front of me.  Sorry for the noise.

adam

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

On 2/28/23 12:29, Adam Ford wrote:
> On Tue, Feb 28, 2023 at 12:48 AM Marek Vasut <marex@denx.de> wrote:
>>
>> On 2/28/23 07:43, Marek Vasut wrote:
>>> On 2/28/23 03:44, Adam Ford wrote:
>>>> On Mon, Feb 27, 2023 at 1:37 PM Marek Vasut <marex@denx.de> wrote:
>>>>>
>>>>> On 2/27/23 19:59, Marco Felsch wrote:
>>>>> [...]
>>>>>
>>>>>>> @@ -344,6 +384,18 @@ &i2c3 {
>>>>>>>        pinctrl-0 = <&pinctrl_i2c3>;
>>>>>>>        status = "okay";
>>>>>>>
>>>>>>> +    wm8960: codec@1a {
>>>>>>> +            #sound-dai-cells = <0>;
>>>>>>> +            compatible = "wlf,wm8960";
>>>>>>> +            reg = <0x1a>;
>>>>>>
>>>>>> The compatible should be the first property followed by the reg
>>>>>> property.
>>>>>
>>>>> See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
>>>>> The rest is fixed in V6.
>>>>>
>>>>>>> +            clocks = <&audio_blk_ctrl
>>>>>>> IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
>>>>>>> +            clock-names = "mclk";
>>>>>>> +            wlf,shared-lrclk;
>>>>>>> +            wlf,hp-cfg = <3 2 3>;
>>>>>>> +            wlf,gpio-cfg = <1 3>;
>>>>>>> +            SPKVDD1-supply = <&reg_audio_pwr>;
>>>>>>> +    };
>>>>>>> +
>>>>>>>        pca6416: gpio@20 {
>>>>>>>                compatible = "ti,tca6416";
>>>>>>>                reg = <0x20>;
>>>>>
>>>>> [...]
>>>>>
>>>>>>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS   0x140
>>>>>>>                >;
>>>>>>>        };
>>>>>>>
>>>>>>> +    pinctrl_sai3: sai3grp {
>>>>>>> +            fsl,pins = <
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK      0xd6
>>>>>>> +
>>>>>>> MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28              0xd6
>>>>>>
>>>>>> What is gpio04-io28 used for?
>>>>>
>>>>> Apparently unused, dropped.
>>>>
>>>> Isn't that the headphone detect GPIO?
>>>>
>>>> I think simple-audio-card,hp-det-gpio can reference it.
>>>
>>> Per the schematics of the MX8MP EVK, the pin is not connected on the
>>> board-to-board connector EVK side, right ?
>>
>> Er, correction, that's AUD_NINT, which is WM8960 GPIO1 .
> 
> I only went by NXP's downstream device tree.  I didn't have the
> schematics in front of me.  Sorry for the noise.

But you and Marco were right in that I had the regulator pinmux wrong 
(fixed in V6)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/5] clk: Introduce devm_clk_hw_register_gate_parent_data()

[Fabio Estevam]

On Mon, Feb 27, 2023 at 2:43 PM Marek Vasut <marex@denx.de> wrote:
>
> Add an API for clock gate that uses parent_data for the parent instead of
> a string parent_name.
>
> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Fabio Estevam <festevam@gmail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel