From: ulf.hansson@linaro.org (Ulf Hansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/10] Add tune support of Mediatek MMC driver
Date: Tue, 27 Oct 2015 10:54:04 +0100 [thread overview]
Message-ID: <CAPDyKFprx7UcZ6OypGZfEC_nLOd02bAFMdmxrOcig0ANVKGRwA@mail.gmail.com> (raw)
In-Reply-To: <1445927070-5102-1-git-send-email-chaotian.jing@mediatek.com>
On 27 October 2015 at 07:24, Chaotian Jing <chaotian.jing@mediatek.com> wrote:
> Change in v3:
> Fix checkpatch errors and warnings for patch 8
> Split patch 9, make DT parts enabling hw reset separately
>
> Change in v2:
> Drop the 400mhz and use assigned-clock-parents to instead
> Split the original tune patch to several independent patches
> Re-write the mmc_send_tuning()
> Fix GPD checksum error
> Move the HS400 setting to ops->prepare_hs400_tuning()
> Modify SD driving settings
>
> Change in v1:
> Add DT bindings for eMMC hardware reset
> Add pinctrl of data strobe pin for HS400 mode
> Modify eMMC driving settings
> Add 400mhz source clock for HS400 mode
> Add eMMC HS200/HS400 mode support
> Add SD SDR50/SDR104 mode support
> Add implement of tune function with CMD19/CMD21
>
> Chaotian Jing (10):
> mmc: core: Add DT bindings for eMMC hardware reset support
> mmc: dt-bindings: update Mediatek MMC bindings
> mmc: mediatek: make cmd_ints_mask to const
> mmc: mediatek: change the argument "ddr" to "timing"
> mmc: mediatek: fix got GPD checksum error interrupt when data transfer
> mmc: mediatek: add implement of ops->hw_reset()
> arm64: dts: mediatek: add eMMC hw reset support
> mmc: mmc: extend the mmc_send_tuning()
> mmc: mediatek: add HS400 support
> arm64: dts: mediatek: add HS200/HS400/SDR50/SDR104 support
>
> Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 11 +-
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 27 +-
> drivers/mmc/core/host.c | 2 +
> drivers/mmc/core/mmc_ops.c | 8 +-
> drivers/mmc/host/dw_mmc-exynos.c | 4 +-
> drivers/mmc/host/dw_mmc.c | 2 +-
> drivers/mmc/host/dw_mmc.h | 2 +-
> drivers/mmc/host/mtk-sd.c | 304 ++++++++++++++++++++---
> drivers/mmc/host/sdhci-esdhc-imx.c | 6 +-
> drivers/mmc/host/sdhci-msm.c | 2 +-
> drivers/mmc/host/sdhci-sirf.c | 2 +-
> include/linux/mmc/core.h | 2 +-
> 13 files changed, 322 insertions(+), 51 deletions(-)
>
> --
> 1.8.1.1.dirty
>
Chaotian,
I have applied this except the ARM patches (patch7 and patch10) as I
think those should go via ARM SoC (unless I get acks for them).
Regarding patch8, it didn't apply since it needed a re-base. This time
it was trivial to fix, so I decided to pick it up anyway.
Future wise I also advise you to significantly trim the cc/to list
when posting patches. Likely what happens when that many people are
requested for input, is that *none* cares. :-)
Thanks and kind regards!
Uffe
prev parent reply other threads:[~2015-10-27 9:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-27 6:24 [PATCH v3 00/10] Add tune support of Mediatek MMC driver Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 01/10] mmc: core: Add DT bindings for eMMC hardware reset support Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 02/10] mmc: dt-bindings: update Mediatek MMC bindings Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 03/10] mmc: mediatek: make cmd_ints_mask to const Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 04/10] mmc: mediatek: change the argument "ddr" to "timing" Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 05/10] mmc: mediatek: fix got GPD checksum error interrupt when data transfer Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 06/10] mmc: mediatek: add implement of ops->hw_reset() Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 07/10] arm64: dts: mediatek: add eMMC hw reset support Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 08/10] mmc: mmc: extend the mmc_send_tuning() Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 09/10] mmc: mediatek: add HS400 support Chaotian Jing
2015-10-27 6:24 ` [PATCH v3 10/10] arm64: dts: mediatek: add HS200/HS400/SDR50/SDR104 support Chaotian Jing
2015-10-27 9:54 ` Ulf Hansson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAPDyKFprx7UcZ6OypGZfEC_nLOd02bAFMdmxrOcig0ANVKGRwA@mail.gmail.com \
--to=ulf.hansson@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).