Re: [PATCH v7 4/4] thermal: mediatek: add another get_temp ops for thermal sensors

["Amjad Ouled-Ameur" <aouledameur@baylibre.com>]

Hi Daniel,
On Sun Dec 4, 2022 at 6:26 PM CET, Daniel Lezcano wrote:
> On 18/11/2022 12:04, Amjad Ouled-Ameur wrote:
> > Provide thermal zone to read thermal sensor in the SoC. We can read all the
> > thermal sensors value in the SoC by the node /sys/class/thermal/
> > 
> > In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS
> > on the first read of sensor that often are bogus values.
> > This can avoid following warning on boot:
> > 
> >    thermal thermal_zone6: failed to read out thermal zone (-13)
> > 
> > Signed-off-by: Michael Kao <michael.kao@mediatek.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> > ---
> >   drivers/thermal/mtk_thermal.c | 99 ++++++++++++++++++++++++++++++++-----------
> >   1 file changed, 74 insertions(+), 25 deletions(-)
> > 
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index 3a5df1440822..b1f4d19edd4f 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -259,6 +259,11 @@ enum mtk_thermal_version {
> >   
> >   struct mtk_thermal;
> >   
> > +struct mtk_thermal_zone {
> > +	struct mtk_thermal *mt;
> > +	int id;
> > +};
> > +
> >   struct thermal_bank_cfg {
> >   	unsigned int num_sensors;
> >   	const int *sensors;
> > @@ -307,6 +312,8 @@ struct mtk_thermal {
> >   
> >   	const struct mtk_thermal_data *conf;
> >   	struct mtk_thermal_bank banks[MAX_NUM_ZONES];
> > +
> > +	int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
> >   };
> >   
> >   /* MT8183 thermal sensor data */
> > @@ -709,6 +716,29 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
> >   		mutex_unlock(&mt->lock);
> >   }
> >   
> > +static int _get_sensor_temp(struct mtk_thermal *mt, int id)
> > +{
> > +	u32 raw;
> > +	int temp;
> > +
> > +	const struct mtk_thermal_data *conf = mt->conf;
> > +
> > +	raw = readl(mt->thermal_base + conf->msr[id]);
> > +
> > +	temp = mt->raw_to_mcelsius(mt, id, raw);
> > +
> > +	/*
> > +	 * The first read of a sensor often contains very high bogus
> > +	 * temperature value. Filter these out so that the system does
> > +	 * not immediately shut down.
> > +	 */
> > +
> > +	if (temp > 200000)
> > +		return -EAGAIN;
> > +	else
> > +		return temp;
> > +}
> > +
> >   /**
> >    * mtk_thermal_bank_temperature - get the temperature of a bank
> >    * @bank:	The bank
> > @@ -721,26 +751,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> >   	struct mtk_thermal *mt = bank->mt;
> >   	const struct mtk_thermal_data *conf = mt->conf;
> >   	int i, temp = INT_MIN, max = INT_MIN;
> > -	u32 raw;
> >   
> >   	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
> > -		raw = readl(mt->thermal_base + conf->msr[i]);
> > -
> > -		if (mt->conf->version == MTK_THERMAL_V1) {
> > -			temp = raw_to_mcelsius_v1(
> > -				mt, conf->bank_data[bank->id].sensors[i], raw);
> > -		} else {
> > -			temp = raw_to_mcelsius_v2(
> > -				mt, conf->bank_data[bank->id].sensors[i], raw);
> > -		}
> > -
> > -		/*
> > -		 * The first read of a sensor often contains very high bogus
> > -		 * temperature value. Filter these out so that the system does
> > -		 * not immediately shut down.
> > -		 */
> > -		if (temp > 200000)
> > -			temp = 0;
> > +		temp = _get_sensor_temp(mt, i);
> >   
> >   		if (temp > max)
> >   			max = temp;
> > @@ -749,9 +762,10 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> >   	return max;
> >   }
> >   
> > -static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> > +static int mtk_read_temp(struct thermal_zone_device *tzdev, int *temperature)
> >   {
> > -	struct mtk_thermal *mt = tz->devdata;
> > +	struct mtk_thermal_zone *tz = tzdev->devdata;
> > +	struct mtk_thermal *mt = tz->mt;
> >   	int i;
> >   	int tempmax = INT_MIN;
> >   
> > @@ -770,10 +784,28 @@ static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> >   	return 0;
> >   }
> >   
> > +static int mtk_read_sensor_temp(struct thermal_zone_device *tzdev, int *temperature)
> > +{
> > +	struct mtk_thermal_zone *tz = tzdev->devdata;
> > +	struct mtk_thermal *mt = tz->mt;
> > +	int id = tz->id - 1;
> > +
> > +	if (id < 0)
> > +		return -EACCES;
> > +
> > +	*temperature = _get_sensor_temp(mt, id);
> > +
> > +	return 0;
> > +}
> > +
> >   static const struct thermal_zone_device_ops mtk_thermal_ops = {
> >   	.get_temp = mtk_read_temp,
> >   };
> >   
> > +static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
> > +	.get_temp = mtk_read_sensor_temp,
> > +};
> > +
> >   static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> >   				  u32 apmixed_phys_base, u32 auxadc_phys_base,
> >   				  int ctrl_id)
> > @@ -1072,6 +1104,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> >   	u64 auxadc_phys_base, apmixed_phys_base;
> >   	struct thermal_zone_device *tzdev;
> >   	void __iomem *apmixed_base, *auxadc_base;
> > +	struct mtk_thermal_zone *tz;
> >   
> >   	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
> >   	if (!mt)
> > @@ -1150,6 +1183,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> >   
> >   	mtk_thermal_turn_on_buffer(mt, apmixed_base);
> >   
> > +	mt->raw_to_mcelsius = (mt->conf->version == MTK_THERMAL_V1) ?
> > +				raw_to_mcelsius_v1 : raw_to_mcelsius_v2;
> > +
> >   	if (mt->conf->version == MTK_THERMAL_V2) {
> >   		mtk_thermal_release_periodic_ts(mt, auxadc_base);
> >   	}
> > @@ -1161,11 +1197,24 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> >   
> >   	platform_set_drvdata(pdev, mt);
> >   
> > -	tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
> > -					      &mtk_thermal_ops);
> > -	if (IS_ERR(tzdev)) {
> > -		ret = PTR_ERR(tzdev);
> > -		goto err_disable_clk_peri_therm;
> > +	for (i = 0; i < mt->conf->num_sensors + 1; i++) {
> > +		tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
> > +		if (!tz)
> > +			return -ENOMEM;
> > +
> > +		tz->mt = mt;
> > +		tz->id = i;
> > +
> > +		tzdev = devm_thermal_of_zone_register(&pdev->dev, i, tz, (i == 0) ?
> > +							     &mtk_thermal_ops :
> > +							     &mtk_thermal_sensor_ops);
>
> Here you use again the aggregation
I addressed this concern in V6, could you please take a look and let me
know what you think [0].

[0]: https://lore.kernel.org/all/5eb0cdc2-e9f9-dd42-bf80-b7dcd8bcc196@baylibre.com/

Regards,
Amjad
>
> > +
> > +		if (IS_ERR(tzdev)) {
> > +			ret = PTR_ERR(tzdev);
> > +			if (ret == -ENODEV)
> > +				continue;
> > +			goto err_disable_clk_peri_therm;
> > +		}
> >   	}
> >   
> >   	ret = devm_thermal_add_hwmon_sysfs(tzdev);
> > 
>
> -- 
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel