linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Esteban Blanc" <eblanc@baylibre.com>
To: "Bhargav Raviprakash" <bhargav.r@ltts.com>,
	<linux-kernel@vger.kernel.org>
Cc: <m.nirmaladevi@ltts.com>, <lee@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<jpanis@baylibre.com>, <devicetree@vger.kernel.org>,
	<arnd@arndb.de>, <gregkh@linuxfoundation.org>,
	<lgirdwood@gmail.com>, <broonie@kernel.org>,
	<linus.walleij@linaro.org>, <linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <nm@ti.com>,
	<vigneshr@ti.com>, <kristo@kernel.org>
Subject: Re: [PATCH v3 09/11] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators
Date: Thu, 14 Mar 2024 12:28:00 +0100	[thread overview]
Message-ID: <CZTFR87IG7MI.11DN441APOPE3@baylibre.com> (raw)
In-Reply-To: <20240308103455.242705-10-bhargav.r@ltts.com>

On Fri Mar 8, 2024 at 11:34 AM CET, Bhargav Raviprakash wrote:
> From: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
>
> Add support for TPS65224 regulators (bucks and LDOs) to TPS6594 driver as
> they have significant functional overlap. TPS65224 PMIC has 4 buck
> regulators and 3 LDOs. BUCK12 can operate in dual phase.
> The output voltages are configurable and are meant to supply power to the
> main processor and other components.
>
> Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
> Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
> ---
>  drivers/regulator/Kconfig             |   4 +-
>  drivers/regulator/tps6594-regulator.c | 236 +++++++++++++++++++++++---
>  2 files changed, 215 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/regulator/tps6594-regulator.c b/drivers/regulator/tps6594-regulator.c
> index b7f0c8779..37d76c483 100644
> --- a/drivers/regulator/tps6594-regulator.c
> +++ b/drivers/regulator/tps6594-regulator.c
> @@ -412,14 +562,20 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
>  	struct tps6594_ext_regulator_irq_data *irq_ext_reg_data;
>  	struct tps6594_regulator_irq_type *irq_type;
>  	u8 buck_configured[BUCK_NB] = { 0 };
> +	u8 ldo_configured[LDO_NB] = { 0 };
>  	u8 buck_multi[MULTI_PHASE_NB] = { 0 };
>  	static const char * const multiphases[] = {"buck12", "buck123", "buck1234", "buck34"};

`multiphases` should prefixed like the new one.

> +	static const char * const tps65224_multiphases[] = {"buck12"};

> @@ -495,25 +660,30 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
>  	if (!irq_data)
>  		return -ENOMEM;
>  
> -	for (i = 0; i < MULTI_PHASE_NB; i++) {
> +	for (i = 0; i < multi_phase_cnt; i++) {
>  		if (buck_multi[i] == 0)
>  			continue;
>  
> +		const struct regulator_desc *multi_regs = (tps->chip_id == TPS65224) ?
> +							   tps65224_multi_regs :
> +							   tps6594_multi_regs;

This should be declared at the top of the function.

>  		rdev = devm_regulator_register(&pdev->dev, &multi_regs[i], &config);
> -		if (IS_ERR(rdev))
> -			return dev_err_probe(tps->dev, PTR_ERR(rdev),
> -					     "failed to register %s regulator\n",
> -					     pdev->name);
> +			if (IS_ERR(rdev))
> +				return dev_err_probe(tps->dev, PTR_ERR(rdev),
> +						     "failed to register %s regulator\n",
> +						     pdev->name);

The indentation of the `if` looks odd. You should revert this.

> @@ -537,21 +707,34 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
>  		if (buck_configured[i] == 1)
>  			continue;
>  
> -		rdev = devm_regulator_register(&pdev->dev, &buck_regs[i], &config);
> +		const struct regulator_desc *buck_cfg = (tps->chip_id == TPS65224) ?
> +							 tps65224_buck_regs : buck_regs;

Same here, should be at the top of the function.

> -	/* LP8764 dosen't have LDO */
> +	/* LP8764 doesn't have LDO */
>  	if (tps->chip_id != LP8764) {
> -		for (i = 0; i < ARRAY_SIZE(ldo_regs); i++) {
> +		for (i = 0; i < LDO_NB; i++) {
> +			if (ldo_configured[i] == 1)
> +				continue;
> +
> +			struct tps6594_regulator_irq_type **ldos_irq_types =
> +						(tps->chip_id == TPS65224) ?
> +						tps65224_ldos_irq_types : tps6594_ldos_irq_types;
> +
> +			const struct regulator_desc *ldo_regs =
> +						(tps->chip_id == TPS65224) ?
> +						tps65224_ldo_regs : tps6594_ldo_regs;

Should be at the top of the function, please fix this in the whole file.

Best regards,

-- 
Esteban "Skallwar" Blanc
BayLibre

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-03-14 11:28 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-08 10:34 [PATCH v3 00/11] Add support for TI TPS65224 PMIC Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 01/11] mfd: tps6594: Add register definitions " Bhargav Raviprakash
2024-03-08 11:24   ` Julien Panis
2024-03-20 10:13     ` Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 02/11] mfd: tps6594: use volatile_table instead of volatile_reg Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 03/11] mfd: tps6594: add regmap config in match data Bhargav Raviprakash
2024-03-14 13:30   ` Dan Carpenter
2024-03-20 10:22     ` Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 04/11] dt-bindings: mfd: ti,tps6594: Add TI TPS65224 PMIC Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 05/11] mfd: tps6594-i2c: Add TI TPS65224 PMIC I2C Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 06/11] mfd: tps6594-spi: Add TI TPS65224 PMIC SPI Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 07/11] mfd: tps6594-core: Add TI TPS65224 PMIC core Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 08/11] misc: tps6594-pfsm: Add TI TPS65224 PMIC PFSM Bhargav Raviprakash
2024-03-08 10:58   ` Julien Panis
2024-03-08 10:34 ` [PATCH v3 09/11] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators Bhargav Raviprakash
2024-03-14 11:28   ` Esteban Blanc [this message]
2024-03-20 10:15     ` Bhargav Raviprakash
2024-03-14 13:30   ` Dan Carpenter
2024-03-20 10:17     ` Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 10/11] pinctrl: pinctrl-tps6594: Add TPS65224 PMIC pinctrl and GPIO Bhargav Raviprakash
2024-03-14 11:29   ` Esteban Blanc
2024-03-20 10:18     ` Bhargav Raviprakash
2024-03-08 10:34 ` [PATCH v3 11/11] arch: arm64: dts: ti: k3-am62p5-sk: Add TPS65224 PMIC support in AM62P dts Bhargav Raviprakash

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CZTFR87IG7MI.11DN441APOPE3@baylibre.com \
    --to=eblanc@baylibre.com \
    --cc=arnd@arndb.de \
    --cc=bhargav.r@ltts.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jpanis@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.nirmaladevi@ltts.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).