* [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
@ 2025-06-13 17:32 Alexey Klimov
2025-06-16 0:11 ` Dmitry Baryshkov
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Alexey Klimov @ 2025-06-13 17:32 UTC (permalink / raw)
To: robin.clark, will, robin.murphy, linux-arm-msm
Cc: joro, iommu, linux-arm-kernel, linux-kernel, stable, andersson,
dmitry.baryshkov
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)
------------[ cut here ]------------
!aspace
WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
Modules linked in: ... (long list of modules)
CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_gem_vma_init+0x150/0x18c [msm]
lr : msm_gem_vma_init+0x150/0x18c [msm]
sp : ffff80008144b280
...
Call trace:
msm_gem_vma_init+0x150/0x18c [msm] (P)
get_vma_locked+0xc0/0x194 [msm]
msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
msm_gem_kernel_new+0x48/0x160 [msm]
msm_gpu_init+0x34c/0x53c [msm]
adreno_gpu_init+0x1b0/0x2d8 [msm]
a6xx_gpu_init+0x1e8/0x9e0 [msm]
adreno_bind+0x2b8/0x348 [msm]
component_bind_all+0x100/0x230
msm_drm_bind+0x13c/0x3d0 [msm]
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa4/0x174
component_add+0x14/0x20
dsi_dev_attach+0x20/0x34 [msm]
dsi_host_attach+0x58/0x98 [msm]
devm_mipi_dsi_attach+0x34/0x90
lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
i2c_device_probe+0x148/0x2a8
really_probe+0xbc/0x2c0
__driver_probe_device+0x78/0x120
driver_probe_device+0x3c/0x154
__driver_attach+0x90/0x1a0
bus_for_each_dev+0x68/0xb8
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x68/0x124
i2c_register_driver+0x48/0xcc
lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
do_one_initcall+0x60/0x1d4
do_init_module+0x54/0x1fc
load_module+0x1748/0x1c8c
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x130/0x2f8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x2c/0x80
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
msm_dpu 5e01000.display-controller: failed to load adreno gpu
platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
msm_dpu 5e01000.display-controller: adev bind failed: -22
lt9611uxc 0-002b: failed to attach dsi to host
lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
---
v2:
- added tags as suggested by Dmitry;
- slightly updated text in the commit message.
Previous version: https://lore.kernel.org/linux-arm-msm/20250528003118.214093-1-alexey.klimov@linaro.org/
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 62874b18f645..c75023718595 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -379,6 +379,7 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
{ .compatible = "qcom,sdm670-mdss" },
{ .compatible = "qcom,sdm845-mdss" },
{ .compatible = "qcom,sdm845-mss-pil" },
+ { .compatible = "qcom,sm6115-mdss" },
{ .compatible = "qcom,sm6350-mdss" },
{ .compatible = "qcom,sm6375-mdss" },
{ .compatible = "qcom,sm8150-mdss" },
--
2.47.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
2025-06-13 17:32 [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Alexey Klimov
@ 2025-06-16 0:11 ` Dmitry Baryshkov
2025-06-28 19:53 ` Alexey Klimov
2025-07-14 11:54 ` Will Deacon
2 siblings, 0 replies; 4+ messages in thread
From: Dmitry Baryshkov @ 2025-06-16 0:11 UTC (permalink / raw)
To: Alexey Klimov
Cc: robin.clark, will, robin.murphy, linux-arm-msm, joro, iommu,
linux-arm-kernel, linux-kernel, stable, andersson
On Fri, Jun 13, 2025 at 06:32:38PM +0100, Alexey Klimov wrote:
> Add the SM6115 MDSS compatible to clients compatible list, as it also
> needs that workaround.
> Without this workaround, for example, QRB4210 RB2 which is based on
> SM4250/SM6115 generates a lot of smmu unhandled context faults during
> boot:
>
> arm_smmu_context_fault: 116854 callbacks suppressed
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
> arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
>
> and also failed initialisation of lontium lt9611uxc, gpu and dpu is
> observed:
> (binding MDSS components triggered by lt9611uxc have failed)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
2025-06-13 17:32 [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Alexey Klimov
2025-06-16 0:11 ` Dmitry Baryshkov
@ 2025-06-28 19:53 ` Alexey Klimov
2025-07-14 11:54 ` Will Deacon
2 siblings, 0 replies; 4+ messages in thread
From: Alexey Klimov @ 2025-06-28 19:53 UTC (permalink / raw)
To: robin.clark, will, robin.murphy, iommu
Cc: joro, linux-arm-kernel, linux-kernel, stable, andersson,
dmitry.baryshkov
On Fri Jun 13, 2025 at 6:32 PM BST, Alexey Klimov wrote:
> Add the SM6115 MDSS compatible to clients compatible list, as it also
> needs that workaround.
> Without this workaround, for example, QRB4210 RB2 which is based on
> SM4250/SM6115 generates a lot of smmu unhandled context faults during
> boot:
>
> arm_smmu_context_fault: 116854 callbacks suppressed
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
> arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
>
> and also failed initialisation of lontium lt9611uxc, gpu and dpu is
> observed:
> (binding MDSS components triggered by lt9611uxc have failed)
>
> ------------[ cut here ]------------
> !aspace
> WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
> Modules linked in: ... (long list of modules)
> CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
> Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
> pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : msm_gem_vma_init+0x150/0x18c [msm]
> lr : msm_gem_vma_init+0x150/0x18c [msm]
> sp : ffff80008144b280
> ...
> Call trace:
> msm_gem_vma_init+0x150/0x18c [msm] (P)
> get_vma_locked+0xc0/0x194 [msm]
> msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
> msm_gem_kernel_new+0x48/0x160 [msm]
> msm_gpu_init+0x34c/0x53c [msm]
> adreno_gpu_init+0x1b0/0x2d8 [msm]
> a6xx_gpu_init+0x1e8/0x9e0 [msm]
> adreno_bind+0x2b8/0x348 [msm]
> component_bind_all+0x100/0x230
> msm_drm_bind+0x13c/0x3d0 [msm]
> try_to_bring_up_aggregate_device+0x164/0x1d0
> __component_add+0xa4/0x174
> component_add+0x14/0x20
> dsi_dev_attach+0x20/0x34 [msm]
> dsi_host_attach+0x58/0x98 [msm]
> devm_mipi_dsi_attach+0x34/0x90
> lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
> lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
> i2c_device_probe+0x148/0x2a8
> really_probe+0xbc/0x2c0
> __driver_probe_device+0x78/0x120
> driver_probe_device+0x3c/0x154
> __driver_attach+0x90/0x1a0
> bus_for_each_dev+0x68/0xb8
> driver_attach+0x24/0x30
> bus_add_driver+0xe4/0x208
> driver_register+0x68/0x124
> i2c_register_driver+0x48/0xcc
> lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
> do_one_initcall+0x60/0x1d4
> do_init_module+0x54/0x1fc
> load_module+0x1748/0x1c8c
> init_module_from_file+0x74/0xa0
> __arm64_sys_finit_module+0x130/0x2f8
> invoke_syscall+0x48/0x104
> el0_svc_common.constprop.0+0xc0/0xe0
> do_el0_svc+0x1c/0x28
> el0_svc+0x2c/0x80
> el0t_64_sync_handler+0x10c/0x138
> el0t_64_sync+0x198/0x19c
> ---[ end trace 0000000000000000 ]---
> msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
> msm_dpu 5e01000.display-controller: failed to load adreno gpu
> platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
> msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
> msm_dpu 5e01000.display-controller: adev bind failed: -22
> lt9611uxc 0-002b: failed to attach dsi to host
> lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22
>
> Suggested-by: Bjorn Andersson <andersson@kernel.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
> Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
> ---
>
> v2:
> - added tags as suggested by Dmitry;
> - slightly updated text in the commit message.
>
> Previous version: https://lore.kernel.org/linux-arm-msm/20250528003118.214093-1-alexey.klimov@linaro.org/
>
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 62874b18f645..c75023718595 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -379,6 +379,7 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
> { .compatible = "qcom,sdm670-mdss" },
> { .compatible = "qcom,sdm845-mdss" },
> { .compatible = "qcom,sdm845-mss-pil" },
> + { .compatible = "qcom,sm6115-mdss" },
> { .compatible = "qcom,sm6350-mdss" },
> { .compatible = "qcom,sm6375-mdss" },
> { .compatible = "qcom,sm8150-mdss" },
Gentle ping.
This was sent over 2 weeks ago.
Thanks,
Alexey Klimov
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
2025-06-13 17:32 [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Alexey Klimov
2025-06-16 0:11 ` Dmitry Baryshkov
2025-06-28 19:53 ` Alexey Klimov
@ 2025-07-14 11:54 ` Will Deacon
2 siblings, 0 replies; 4+ messages in thread
From: Will Deacon @ 2025-07-14 11:54 UTC (permalink / raw)
To: robin.clark, robin.murphy, linux-arm-msm, Alexey Klimov
Cc: catalin.marinas, kernel-team, Will Deacon, joro, iommu,
linux-arm-kernel, linux-kernel, stable, andersson,
dmitry.baryshkov
On Fri, 13 Jun 2025 18:32:38 +0100, Alexey Klimov wrote:
> Add the SM6115 MDSS compatible to clients compatible list, as it also
> needs that workaround.
> Without this workaround, for example, QRB4210 RB2 which is based on
> SM4250/SM6115 generates a lot of smmu unhandled context faults during
> boot:
>
> arm_smmu_context_fault: 116854 callbacks suppressed
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
> arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
> arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
> iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
> arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
>
> [...]
Applied to iommu (arm/smmu/bindings), thanks!
[1/1] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
https://git.kernel.org/iommu/c/f7fa8520f303
Cheers,
--
Will
https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-07-14 12:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-13 17:32 [PATCH v2] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Alexey Klimov
2025-06-16 0:11 ` Dmitry Baryshkov
2025-06-28 19:53 ` Alexey Klimov
2025-07-14 11:54 ` Will Deacon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).