From mboxrd@z Thu Jan 1 00:00:00 1970 From: galak@codeaurora.org (Kumar Gala) Date: Thu, 23 Jan 2014 13:59:28 -0600 Subject: [PATCH 0/2] Enable clock controllers on MSM In-Reply-To: <878uu6y5im.fsf@paris.lan> References: <1389921904-3777-1-git-send-email-sboyd@codeaurora.org> <878uu6y5im.fsf@paris.lan> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Jan 23, 2014, at 11:25 AM, Kevin Hilman wrote: > Stephen Boyd writes: > >> These patches add the clock controller nodes, enable the clock drivers >> on MSM based platforms, and hook it up enough to get the serial console >> working. This is based on the merge of Mike's clk-next branch with >> linux-next-20140116. The changes need the clk-next branch because that's >> where the DTS include files landed. > > I forgot to repond to this earlier, but I tested this on top of -next > and it gets the dragonboard booting w/mainline. Yay! > >> Perhaps this can be applied after 3.14-rc1 is out? > > Yeah, sounds good. > > Kevin We?ll need arm-soc to pull in the clk changes from Mike?s tree for that. > Stephen Boyd (2): >> ARM: dts: msm: Add clock controller nodes and hook into uart >> ARM: msm_defconfig: Enable MSM clock drivers >> >> arch/arm/boot/dts/qcom-msm8660-surf.dts | 11 +++++++++++ >> arch/arm/boot/dts/qcom-msm8960-cdp.dts | 18 ++++++++++++++++++ >> arch/arm/boot/dts/qcom-msm8974.dtsi | 24 ++++++++++++++++++++++++ >> arch/arm/configs/msm_defconfig | 4 ++++ >> 4 files changed, 57 insertions(+) - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation