From: "Diederik de Haas" <diederik@cknow-tech.com>
To: "Pedro Alves" <pta2002@pta2002.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Heiko Stuebner" <heiko@sntech.de>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-rockchip@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
Date: Wed, 04 Mar 2026 19:38:02 +0100 [thread overview]
Message-ID: <DGU7SPZQMZR5.1506XM8RO4EHE@cknow-tech.com> (raw)
In-Reply-To: <20260304-radxa-r5-itx-hdmirx-v1-1-f77bf1f7ce03@pta2002.com>
On Wed Mar 4, 2026 at 2:54 PM CET, Pedro Alves wrote:
> The Radxa Rock 5 ITX board exposes an HDMI input exactly the same way as
> the Rock 5B, but this was not reflected in its DTS.
>
> Change the rk3588-rock-5-itx to configure and enable the hdmi_receiver
> and hdmi_receiver_cma nodes.
>
> One of the existing pinctrl labels, hdmirx_det, was renamed into
> hdmirx_hpd to match the other boards. The _det name seems to have come
> from the downstream kernel sources, where the other boards also have
> that name. Changing it to hdmirx_hpd in order to be consistent with the
> other rk3588 boards in the kernel.
I have a strong suspicion that it was named 'hdmirx_det' because in the
schema its label is 'HDMIIRX_DET_L' where the extra 'I' was probably
dropped as that seems to be a spelling issue and the '_L' suffix is
quite often dropped.
FWIW: The label in the schematic for Rock 5B, Rock 5B+, Rock 5T and Rock
5 ITX+ are all 'HDMIIRX_DET_L', yet none of them follow the convention
to use the label from the schematics.
So now the 'problem' is indeed: make it consistent with the other boards
or keep the one where the convention was followed.
Cheers,
Diederik
> The configurations were confirmed to be identical on the downstream
> Radxa kernel, and this has been tested to work on a Rock 5 ITX board
> running kernel 6.19.3.
>
> Signed-off-by: Pedro Alves <pta2002@pta2002.com>
> ---
> Tested with the following commands:
>
> v4l2-ctl --verbose -d /dev/video4 \
> --set-fmt-video=width=3840,height=2160,pixelformat='BGR3' \
> --stream-mmap=4 --stream-skip=3 --stream-count=20 \
> --stream-to=hdmiin.raw --stream-poll
>
> ffmpeg -f rawvideo -vcodec rawvideo -s 3840x2160 -r 30 -pix_fmt bgr24 \
> -i hdmiin.raw output.mp4
> ---
> arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> index 172aeabba72a..9f4f31d1ca94 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
> @@ -349,6 +349,18 @@ &hdmi1_sound {
> status = "okay";
> };
>
> +&hdmi_receiver_cma {
> + status = "okay";
> +};
> +
> +&hdmi_receiver {
> + pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
> + pinctrl-names = "default";
> +
> + hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> &hdptxphy1 {
> status = "okay";
> };
> @@ -746,7 +758,7 @@ vbus5v0_typec_en: vbus5v0-typec-en {
> };
>
> hdmirx {
> - hdmirx_det: hdmirx-det {
> + hdmirx_hpd: hdmirx-5v-detection {
> rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> };
>
> ---
> base-commit: 05f7e89ab9731565d8a62e3b5d1ec206485eeb0b
> change-id: 20260303-radxa-r5-itx-hdmirx-f4645e64f8c3
>
> Best regards,
next prev parent reply other threads:[~2026-03-04 18:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-04 13:54 [PATCH] arm64: dts: rockchip: configure hdmirx in Rock 5 ITX Pedro Alves
2026-03-04 18:38 ` Diederik de Haas [this message]
2026-03-04 20:05 ` Pedro Alves
2026-03-04 20:26 ` Heiko Stuebner
2026-03-04 20:48 ` Pedro Alves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DGU7SPZQMZR5.1506XM8RO4EHE@cknow-tech.com \
--to=diederik@cknow-tech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=pta2002@pta2002.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox