From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E26F7C44500 for ; Mon, 6 Jul 2026 08:48:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:In-Reply-To:References:To: From:Subject:Cc:Message-Id:Date:Content-Type:Content-Transfer-Encoding: Mime-Version:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=4G2+USFAeZTDisSq/eM4nDWS0t6QootkKLNwL7GEI6s=; b=j9Dkn9sbQm9q8tD4H4kEBh/ers PiR/hAw6G8G70CgzgHCwXvVlQopgAjNENIjgPvw0e/Y5TkMCyxj2xz+Pz2yB1rqpWxxaZHRM6RRk+ I5me6IN+QxZmyx2kfxJPk4XcSU8iiYRql0VG85ZLxLl3o+2y3vvB3xjsPt+kJyu/yvtBIuyu9gJBt kBKcp66KAf+dFxKsdVJOpsWfwli8F/lJqCYWqrOMkW/e9hoeLY4LVLRktd4x269cmH9ZTta3AZ7Kj IzblmXasxg3Hde/wZ1HoNsAqfM0GgoArUvicIi+GC0cuqirMMr9iI0gjb8h4SbMMopQGG/s8q1tZ/ lfWtYvqw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.99.1 #2 (Red Hat Linux)) id 1wgf0R-0000000Btb1-2DiX; Mon, 06 Jul 2026 08:48:47 +0000 Received: from smtpout-04.galae.net ([185.171.202.116]) by bombadil.infradead.org with esmtps (Exim 4.99.1 #2 (Red Hat Linux)) id 1wgf0N-0000000BtYM-1tjf for linux-arm-kernel@lists.infradead.org; Mon, 06 Jul 2026 08:48:46 +0000 Received: from smtpout-01.galae.net (smtpout-01.galae.net [212.83.139.233]) by smtpout-04.galae.net (Postfix) with ESMTPS id 29905C8EC65; Mon, 6 Jul 2026 08:48:52 +0000 (UTC) Received: from mail.galae.net (mail.galae.net [212.83.136.155]) by smtpout-01.galae.net (Postfix) with ESMTPS id 17D68601A2; Mon, 6 Jul 2026 08:48:39 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 6922C11BB9D9D; Mon, 6 Jul 2026 10:48:33 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=dkim; t=1783327717; h=from:subject:date:message-id:to:cc:mime-version:content-type: content-transfer-encoding:in-reply-to:references; bh=4G2+USFAeZTDisSq/eM4nDWS0t6QootkKLNwL7GEI6s=; b=gW1AZif3NdWuwJpcaSREpPyyzuzLVd6yQeWN/RWYlglDm0RwfTJdyVqzGj2HaxYgqGb15r SI5y5Jtp6apxHnFT3jd5CKjLqUDoukQNNZ6T47eGareIAu+Vj0a+MwOm6j17N2t5v+Itsy I6bmUZdZ1Xn4YFbvDRlORuo/quhrnQyqTdRLXtYOMjuuevVQjLX7KR00jqSc/EHkmD812F LkIoPE9qnTCZ7hVcb36epMNvJ35G+b4CplTfizscLw+l9t4n6lh6SkRn5Ohq4SROCD5iVb iphsKW7hpvYrGOOv2tSBXA6qa3bHMKVscFwAojrisvLbZNZaqPgshagL764ZOw== Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=UTF-8 Date: Mon, 06 Jul 2026 10:48:32 +0200 Message-Id: Cc: "Qiang Zhao" , "Christophe Leroy (CS GROUP)" , "Thomas Gleixner" , "Rob Herring" , "Krzysztof Kozlowski" , "Conor Dooley" , "Linus Walleij" , "Bartosz Golaszewski" , "Madhavan Srinivasan" , "Michael Ellerman" , "Nicholas Piggin" , , , , , , "Thomas Petazzoni" Subject: Re: [PATCH 04/12] dt-bindings: soc: fsl: qe: Add support of IRQ in QE GPIO From: "Paul Louvel" To: "Krzysztof Kozlowski" , "Paul Louvel" X-Mailer: aerc 0.21.0-0-g5549850facc2 References: <20260703-qe-pic-gpios-v1-0-6c3e706e27dc@bootlin.com> <20260703-qe-pic-gpios-v1-4-6c3e706e27dc@bootlin.com> <20260706-elfish-cornflower-bullfinch-604e0a@quoll> In-Reply-To: <20260706-elfish-cornflower-bullfinch-604e0a@quoll> X-Last-TLS-Session-Version: TLSv1.3 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.9.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260706_014843_825061_03F40B19 X-CRM114-Status: GOOD ( 23.03 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org On Mon Jul 6, 2026 at 8:52 AM CEST, Krzysztof Kozlowski wrote: > On Fri, Jul 03, 2026 at 03:30:12PM +0200, Paul Louvel wrote: >> Some QE GPIO pins have an associated interrupt line in the QE PIC to >> signal state changes on the pin. Add the corresponding >> interrupt-controller / nexus properties to the QE GPIO binding. >>=20 >> Because the GPIO controller does not perform any interrupt handling >> itself, a nexus node (interrupt-map) is used to map each GPIO line >> supporting IRQ to the parent QE PIC interrupt domain. >>=20 >> As the QE PIC can be configured to generate an interrupt on either a >> high-to-low transition or any change in signal state, three >> interrupt-map entries are needed per GPIO pin that can yield an >> interrupt (falling, both, and the "none" case which defaults to both in >> QE PIC). This overhead is necessary because the interrupt-map-pass-thru >> property is not part of the DT specification. >>=20 >> The interrupt-map property is optional: it is not required for GPIO >> banks that have no interrupt capable GPIO line (e.g. port D on MPC8323), >> or when interrupt functionality is not used. >>=20 >> Update the example to show a scenario where each bank supports a >> different numbers of IRQs, or no IRQs at all. >>=20 >> Signed-off-by: Paul Louvel >> --- >> .../bindings/gpio/fsl,mpc8323-qe-pario-bank.yaml | 69 +++++++++++++++= ++++++- >> 1 file changed, 66 insertions(+), 3 deletions(-) >>=20 >> diff --git a/Documentation/devicetree/bindings/gpio/fsl,mpc8323-qe-pario= -bank.yaml b/Documentation/devicetree/bindings/gpio/fsl,mpc8323-qe-pario-ba= nk.yaml >> index 1af99339ff40..0c849a5698f4 100644 >> --- a/Documentation/devicetree/bindings/gpio/fsl,mpc8323-qe-pario-bank.y= aml >> +++ b/Documentation/devicetree/bindings/gpio/fsl,mpc8323-qe-pario-bank.y= aml >> @@ -27,6 +27,17 @@ properties: >> "#gpio-cells": >> const: 2 >> =20 >> + "#address-cells": >> + const: 0 >> + >> + "#interrupt-cells": >> + const: 2 >> + > > If this has interrupt-cells, then it is a nexus, thus why isn't this > also a "interrupt-controller"? Because these these banks are not interrupt controllers. Interrupts are handled by the QE PIC, and the GPIO controller does not do a= ny interrupt handling itself. In this setup, does it really needs an "interrupt-controller" property? > >> + interrupt-map: >> + description: | >> + Specifies the mapping of GPIO lines to the parent interrupt contr= oller, as the >> + GPIO controller does not do interrupt handling itself. >> + >> required: >> - compatible >> - reg >> @@ -37,9 +48,61 @@ additionalProperties: false >> =20 >> examples: >> - | >> - gpio-controller@1400 { >> - compatible =3D "fsl,mpc8360-qe-pario-bank", "fsl,mpc8323-qe-par= io-bank"; >> - reg =3D <0x1400 0x18>; > > I don't get why you rewrite existing example instead of adding new one. I could yes. > >> + #include >> + >> + pic: interrupt-controller { >> + interrupt-controller; >> + #address-cells =3D <0>; >> + #interrupt-cells =3D <2>; >> + }; > > Drop node, irrelevant. > >> + >> + gpio-controller@1418 { >> + #gpio-cells =3D <2>; >> + #address-cells =3D <0>; >> + #interrupt-cells =3D <2>; >> + compatible =3D "fsl,mpc8323-qe-pario-bank"; >> + reg =3D <0x1418 0x18>; > > And now you are not following DTS coding style. > >> gpio-controller; >> + interrupt-map =3D < >> + 7 IRQ_TYPE_EDGE_FALLING &pic 4 IRQ_TYPE_EDGE_FALLING >> + 7 IRQ_TYPE_EDGE_BOTH &pic 4 IRQ_TYPE_EDGE_BOTH >> + 7 0 &pic 4 IRQ_TYPE_NONE >> + >> + 9 IRQ_TYPE_EDGE_FALLING &pic 5 IRQ_TYPE_EDGE_FALLING >> + 9 IRQ_TYPE_EDGE_BOTH &pic 5 IRQ_TYPE_EDGE_BOTH >> + 9 0 &pic 5 IRQ_TYPE_NONE >> + >> + 25 IRQ_TYPE_EDGE_FALLING &pic 6 IRQ_TYPE_EDGE_FALLING >> + 25 IRQ_TYPE_EDGE_BOTH &pic 6 IRQ_TYPE_EDGE_BOTH >> + 25 0 &pic 6 IRQ_TYPE_NONE >> + >> + 27 IRQ_TYPE_EDGE_FALLING &pic 7 IRQ_TYPE_EDGE_FALLING >> + 27 IRQ_TYPE_EDGE_BOTH &pic 7 IRQ_TYPE_EDGE_BOTH >> + 27 0 &pic 7 IRQ_TYPE_NONE >> + >; >> + }; >> + >> + gpio-controller@1430 { >> #gpio-cells =3D <2>; > > So two new examples? But old one was wrong? > >> + #address-cells =3D <0>; >> + #interrupt-cells =3D <2>; >> + compatible =3D "fsl,mpc8323-qe-pario-bank"; >> + reg =3D <0x1430 0x18>; >> + gpio-controller; >> + interrupt-map =3D < >> + 24 IRQ_TYPE_EDGE_FALLING &pic 8 IRQ_TYPE_EDGE_FALLING >> + 24 IRQ_TYPE_EDGE_BOTH &pic 8 IRQ_TYPE_EDGE_BOTH >> + 24 0 &pic 8 IRQ_TYPE_NONE >> + >> + 29 IRQ_TYPE_EDGE_FALLING &pic 9 IRQ_TYPE_EDGE_FALLING >> + 29 IRQ_TYPE_EDGE_BOTH &pic 9 IRQ_TYPE_EDGE_BOTH >> + 29 0 &pic 9 IRQ_TYPE_NONE >> + >; >> + }; >> + >> + gpio-controller@1448 { >> + #gpio-cells =3D <2>; >> + compatible =3D "fsl,mpc8323-qe-pario-bank"; > > Wait, three examples? But isn't this the same as previous one? I wanted to outline that each bank do not have the same number of GPIO line= s that support interrupts. > >> + reg =3D <0x1448 0x18>; >> + gpio-controller; >> }; >>=20 >> --=20 >> 2.55.0 >>=20 Thanks, Paul. --=20 Paul Louvel, Bootlin Embedded Linux and Kernel engineering https://bootlin.com