linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rmk+kernel@arm.linux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [CFT 08/11] spi: omap2-mcspi: remove private DMA API implementation
Date: Thu, 07 Jun 2012 12:08:55 +0100	[thread overview]
Message-ID: <E1ScaaF-0003u3-K0@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20120607110610.GB15973@n2100.arm.linux.org.uk>

Remove the private DMA API implementation from spi-omap2-mcspi.c,
making it use entirely the DMA engine API.

Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/spi/spi-omap2-mcspi.c |  104 ++---------------------------------------
 1 files changed, 5 insertions(+), 99 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index ca016df..9d3409a 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -20,8 +20,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#define USE_DMA_ENGINE_RX
-#define USE_DMA_ENGINE_TX
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -43,7 +41,6 @@
 
 #include <linux/spi/spi.h>
 
-#include <plat/dma.h>
 #include <plat/clock.h>
 #include <plat/mcspi.h>
 
@@ -99,8 +96,6 @@
 struct omap2_mcspi_dma {
 	struct dma_chan *dma_tx;
 	struct dma_chan *dma_rx;
-	int dma_tx_channel;
-	int dma_rx_channel;
 
 	int dma_tx_sync_dev;
 	int dma_rx_sync_dev;
@@ -336,9 +331,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	struct omap2_mcspi	*mcspi;
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
 	struct omap2_mcspi_dma  *mcspi_dma;
-	unsigned int		count, c;
-	unsigned long		base, tx_reg, rx_reg;
-	int			word_len, data_type, element_count;
+	unsigned int		count;
+	int			word_len, element_count;
 	int			elements = 0;
 	u32			l;
 	u8			* rx;
@@ -420,73 +414,26 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	}
 
 	count = xfer->len;
-	c = count;
 	word_len = cs->word_len;
 
-	base = cs->phys;
-	tx_reg = base + OMAP2_MCSPI_TX0;
-	rx_reg = base + OMAP2_MCSPI_RX0;
 	rx = xfer->rx_buf;
 	tx = xfer->tx_buf;
 
 	if (word_len <= 8) {
-		data_type = OMAP_DMA_DATA_TYPE_S8;
 		element_count = count;
 	} else if (word_len <= 16) {
-		data_type = OMAP_DMA_DATA_TYPE_S16;
 		element_count = count >> 1;
 	} else /* word_len <= 32 */ {
-		data_type = OMAP_DMA_DATA_TYPE_S32;
 		element_count = count >> 2;
 	}
 
-	if (tx != NULL && mcspi_dma->dma_tx_channel != -1) {
-		omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel,
-				data_type, element_count, 1,
-				OMAP_DMA_SYNC_ELEMENT,
-				mcspi_dma->dma_tx_sync_dev, 0);
-
-		omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0,
-				OMAP_DMA_AMODE_CONSTANT,
-				tx_reg, 0, 0);
-
-		omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0,
-				OMAP_DMA_AMODE_POST_INC,
-				xfer->tx_dma, 0, 0);
-	}
-
-	if (rx != NULL && mcspi_dma->dma_rx_channel != -1) {
-		elements = element_count - 1;
-		if (l & OMAP2_MCSPI_CHCONF_TURBO)
-			elements--;
-
-		omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
-				data_type, elements, 1,
-				OMAP_DMA_SYNC_ELEMENT,
-				mcspi_dma->dma_rx_sync_dev, 1);
-
-		omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0,
-				OMAP_DMA_AMODE_CONSTANT,
-				rx_reg, 0, 0);
-
-		omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0,
-				OMAP_DMA_AMODE_POST_INC,
-				xfer->rx_dma, 0, 0);
-	}
-
 	if (tx != NULL) {
-		if (mcspi_dma->dma_tx)
-			dma_async_issue_pending(mcspi_dma->dma_tx);
-		else
-			omap_start_dma(mcspi_dma->dma_tx_channel);
+		dma_async_issue_pending(mcspi_dma->dma_tx);
 		omap2_mcspi_set_dma_req(spi, 0, 1);
 	}
 
 	if (rx != NULL) {
-		if (mcspi_dma->dma_rx)
-			dma_async_issue_pending(mcspi_dma->dma_rx);
-		else
-			omap_start_dma(mcspi_dma->dma_rx_channel);
+		dma_async_issue_pending(mcspi_dma->dma_rx);
 		omap2_mcspi_set_dma_req(spi, 1, 1);
 	}
 
@@ -830,16 +777,6 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 	return 0;
 }
 
-static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data)
-{
-	omap2_mcspi_rx_callback(data);
-}
-
-static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data)
-{
-	omap2_mcspi_tx_callback(data);
-}
-
 static int omap2_mcspi_request_dma(struct spi_device *spi)
 {
 	struct spi_master	*master = spi->master;
@@ -856,23 +793,13 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
-#ifdef USE_DMA_ENGINE_RX
 	sig = mcspi_dma->dma_rx_sync_dev;
 	mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
 	if (!mcspi_dma->dma_rx) {
 		dev_err(&spi->dev, "no RX DMA engine channel for McSPI\n");
 		return -EAGAIN;
 	}
-#else
-	if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX",
-			omap2_mcspi_dma_rx_callback, spi,
-			&mcspi_dma->dma_rx_channel)) {
-		dev_err(&spi->dev, "no RX DMA channel for McSPI\n");
-		return -EAGAIN;
-	}
-#endif
 
-#ifdef USE_DMA_ENGINE_TX
 	sig = mcspi_dma->dma_tx_sync_dev;
 	mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
 	if (!mcspi_dma->dma_tx) {
@@ -881,16 +808,6 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 		mcspi_dma->dma_rx = NULL;
 		return -EAGAIN;
 	}
-#else
-	if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX",
-			omap2_mcspi_dma_tx_callback, spi,
-			&mcspi_dma->dma_tx_channel)) {
-		omap_free_dma(mcspi_dma->dma_rx_channel);
-		mcspi_dma->dma_rx_channel = -1;
-		dev_err(&spi->dev, "no TX DMA channel for McSPI\n");
-		return -EAGAIN;
-	}
-#endif
 
 	return 0;
 }
@@ -923,8 +840,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		list_add_tail(&cs->node, &ctx->cs);
 	}
 
-	if ((!mcspi_dma->dma_rx && mcspi_dma->dma_rx_channel == -1) ||
-	    (!mcspi_dma->dma_tx && mcspi_dma->dma_tx_channel == -1)) {
+	if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) {
 		ret = omap2_mcspi_request_dma(spi);
 		if (ret < 0)
 			return ret;
@@ -966,14 +882,6 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 			dma_release_channel(mcspi_dma->dma_tx);
 			mcspi_dma->dma_tx = NULL;
 		}
-		if (mcspi_dma->dma_rx_channel != -1) {
-			omap_free_dma(mcspi_dma->dma_rx_channel);
-			mcspi_dma->dma_rx_channel = -1;
-		}
-		if (mcspi_dma->dma_tx_channel != -1) {
-			omap_free_dma(mcspi_dma->dma_tx_channel);
-			mcspi_dma->dma_tx_channel = -1;
-		}
 	}
 }
 
@@ -1292,7 +1200,6 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 			break;
 		}
 
-		mcspi->dma_channels[i].dma_rx_channel = -1;
 		mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
 		sprintf(dma_ch_name, "tx%d", i);
 		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
@@ -1303,7 +1210,6 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 			break;
 		}
 
-		mcspi->dma_channels[i].dma_tx_channel = -1;
 		mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start;
 	}
 
-- 
1.7.4.4

  parent reply	other threads:[~2012-06-07 11:08 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-07 10:34 [CFT] DMA engine patches Russell King - ARM Linux
2012-06-07 10:40 ` [CFT 1/3] dmaengine: split out virtual channel DMA support from sa11x0 driver Russell King
2012-06-07 10:41 ` [CFT 2/3] dmaengine: virt-dma: vchan_find_desc() Russell King
2012-06-07 10:41 ` [CFT 3/3] dmaengine: virt-dma: add support for cyclic DMA periodic callbacks Russell King
2012-06-07 10:42   ` [CFT] SA11x0 patches Russell King - ARM Linux
2012-06-07 10:43     ` [CFT 1/2] dmaengine: sa11x0-dma: fix DMA residue support Russell King
2012-06-07 10:43     ` [CFT 2/2] dmaengine: sa11x0-dma: add cyclic DMA support Russell King
2012-06-07 10:45   ` [CFT] PL08x patches Russell King - ARM Linux
2012-06-07 10:46     ` [CFT 01/31] dmaengine: PL08x: remove runtime PM support Russell King
2012-06-07 10:46     ` [CFT 02/31] dmaengine: PL08x: fix missed dma_transfer_direction fixup Russell King
2012-06-07 10:46     ` [CFT 03/31] dmaengine: PL08x: remove redundant spinlock Russell King
2012-06-07 10:47     ` [CFT 04/31] dmaengine: PL08x: remove circular_buffer boolean from channel data Russell King
2012-06-07 10:47     ` [CFT 05/31] dmaengine: PL08x: clean up get_signal/put_signal Russell King
2012-06-10 10:03       ` Russell King - ARM Linux
2012-06-07 10:47     ` [CFT 06/31] dmaengine: PL08x: move private data structures into amba-pl08x.c Russell King
2012-06-07 10:48     ` [CFT 07/31] dmaengine: PL08x: constify channel names and bus_id strings Russell King
2012-06-07 10:48     ` [CFT 08/31] dmaengine: PL08x: get src/dst addr direct from dma_slave_config struct Russell King
2012-06-07 10:48     ` [CFT 09/31] dmaengine: PL08x: get rid of device_fc in struct pl08x_dma_chan Russell King
2012-06-07 10:49     ` [CFT 10/31] dmaengine: PL08x: move the bus and increment selection to dma prepare function Russell King
2012-06-07 10:49     ` [CFT 11/31] dmaengine: PL08x: extract function to to generate cctl values Russell King
2012-06-07 10:49     ` [CFT 12/31] dmaengine: PL08x: ignore 'direction' argument in dma_slave_config Russell King
2012-06-07 10:50     ` [CFT 13/31] dmaengine: PL08x: get rid of unnecessary checks " Russell King
2012-06-07 10:50     ` [CFT 14/31] dmaengine: PL08x: split DMA signal muxing from channel alloc Russell King
2012-06-07 10:50     ` [CFT 15/31] dmaengine: PL08x: move DMA signal muxing into pl08x_dma_chan struct Russell King
2012-06-07 10:51     ` [CFT 16/31] dmaengine: PL08x: track mux usage on a per-channel basis Russell King
2012-06-07 10:51     ` [CFT 17/31] dmaengine: PL08x: convert to a list of completed descriptors Russell King
2012-06-07 10:51     ` [CFT 18/31] dmaengine: PL08x: move DMA signal muxing into slave prepare code Russell King
2012-06-07 10:52     ` [CFT 19/31] dmaengine: PL08x: remove waiting descriptor pointer Russell King
2012-06-07 10:52     ` [CFT 20/31] dmaengine: PL08x: re-jig the starting of txds Russell King
2012-06-07 10:52     ` [CFT 21/31] dmaengine: PL08x: split the pend_list in two Russell King
2012-06-07 10:53     ` [CFT 22/31] dmaengine: PL08x: start next descriptor from irq context Russell King
2012-06-07 10:53     ` [CFT 23/31] dmaengine: PL08x: rejig physical channel allocation Russell King
2012-06-07 10:53     ` [CFT 24/31] dmaengine: PL08x: convert to use virt-dma structs Russell King
2012-06-07 10:54     ` [CFT 25/31] dmaengine: PL08x: use vchan's spinlock Russell King
2012-06-07 10:54     ` [CFT 26/31] dmaengine: PL08x: convert to use vchan submitted/issued lists Russell King
2012-06-07 10:54     ` [CFT 27/31] dmaengine: PL08x: convert to use vchan done list Russell King
2012-06-07 10:55     ` [CFT 28/31] dmaengine: PL08x: fix tx_status function to return correct residue Russell King
2012-06-07 10:55     ` [CFT 29/31] dmaengine: PL08x: get rid of pl08x_prep_channel_resources Russell King
2012-06-07 10:55     ` [CFT 30/31] dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking Russell King
2012-06-07 10:56     ` [CFT 31/31] dmaengine: PL08x: ensure all descriptors are freed when channel is released Russell King
2012-06-08  8:32     ` [CFT] PL08x patches Linus Walleij
2012-06-07 11:06   ` [CFT] OMAP patches Russell King - ARM Linux
2012-06-07 11:06     ` [CFT 01/11] dmaengine: add OMAP DMA engine driver Russell King
2012-06-07 12:40       ` S, Venkatraman
2012-06-07 12:45         ` S, Venkatraman
2012-06-08  6:19       ` Shilimkar, Santosh
2012-06-08  9:02       ` Russell King - ARM Linux
2012-06-08 10:00         ` Shilimkar, Santosh
2012-06-08 10:01           ` Russell King - ARM Linux
2012-06-07 11:06     ` [CFT 02/11] mmc: omap_hsmmc: add DMA engine support Russell King
2012-06-07 17:04       ` Tony Lindgren
2012-06-08  8:53       ` Linus Walleij
2012-06-07 11:07     ` [CFT 03/11] mmc: omap_hsmmc: remove private DMA API implementation Russell King
2012-06-07 17:04       ` Tony Lindgren
2012-06-07 17:53       ` S, Venkatraman
2012-07-10 21:48       ` Kevin Hilman
2012-06-07 11:07     ` [CFT 04/11] mmc: omap: add DMA engine support Russell King
2012-06-07 17:05       ` Tony Lindgren
2012-06-08  8:52       ` Linus Walleij
2012-06-07 11:07     ` [CFT 05/11] mmc: omap: remove private DMA API implementation Russell King
2012-06-07 17:05       ` Tony Lindgren
2012-06-07 11:08     ` [CFT 06/11] ARM: omap: remove mmc platform data dma_mask and initialization Russell King
2012-06-07 17:06       ` Tony Lindgren
2012-06-07 11:08     ` [CFT 07/11] spi: omap2-mcspi: add DMA engine support Russell King
2012-06-08  8:50       ` Linus Walleij
2012-06-14 11:53       ` Russell King - ARM Linux
2012-06-14 12:08         ` Russell King - ARM Linux
2012-06-14 12:50           ` Russell King - ARM Linux
2012-06-14 14:07             ` [PATCH] SPI: OMAP: fix over-eager devm_xxx() conversion (was: Re: [CFT 07/11] spi: omap2-mcspi: add DMA engine support) Russell King - ARM Linux
2012-06-16 10:33               ` Russell King - ARM Linux
2012-06-18  6:41             ` [CFT 07/11] spi: omap2-mcspi: add DMA engine support Shubhrajyoti
2012-06-07 11:08     ` Russell King [this message]
2012-06-07 11:09     ` [CFT 09/11] mtd: omap2: " Russell King
2012-06-07 12:49       ` Artem Bityutskiy
2012-06-07 13:11         ` Russell King - ARM Linux
2012-06-07 13:28           ` Artem Bityutskiy
2012-06-07 17:10             ` Tony Lindgren
2012-06-07 11:09     ` [CFT 10/11] mtd: omap2: remove private DMA API implementation Russell King
2012-06-07 11:09     ` [CFT 11/11] Add feature removal of old OMAP private DMA implementation Russell King
2012-06-07 17:07       ` Tony Lindgren
2012-06-08  6:10       ` Shilimkar, Santosh
2012-06-08 18:37       ` Rob Landley
2012-06-09  8:32         ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1ScaaF-0003u3-K0@rmk-PC.arm.linux.org.uk \
    --to=rmk+kernel@arm.linux.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).