public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "spi: s3c64xx: simplify if statement in prepare_transfer function" to the spi tree
Date: Thu, 30 Jun 2016 13:15:42 +0100	[thread overview]
Message-ID: <E1bIasg-0001CB-06@finisterre> (raw)
In-Reply-To: <1466150245-2648-6-git-send-email-andi.shyti@samsung.com>

The patch

   spi: s3c64xx: simplify if statement in prepare_transfer function

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 730d9d4d11cf48b17d07daaff1f0540642317e09 Mon Sep 17 00:00:00 2001
From: Andi Shyti <andi.shyti@samsung.com>
Date: Tue, 28 Jun 2016 11:41:14 +0900
Subject: [PATCH] spi: s3c64xx: simplify if statement in prepare_transfer
 function

The whole function is inside an 'if' statement
("!is_polling(sdd)").

Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.

Remove the goto paths as they are redundant.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-s3c64xx.c | 50 +++++++++++++++++++++--------------------------
 1 file changed, 22 insertions(+), 28 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index c65a9e6baefd..6d8486fc668f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -341,38 +341,32 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 	dma_filter_fn filter = sdd->cntrlr_info->filter;
 	struct device *dev = &sdd->pdev->dev;
 	dma_cap_mask_t mask;
-	int ret;
 
-	if (!is_polling(sdd)) {
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		/* Acquire DMA channels */
-		sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
-				   sdd->cntrlr_info->dma_rx, dev, "rx");
-		if (!sdd->rx_dma.ch) {
-			dev_err(dev, "Failed to get RX DMA channel\n");
-			ret = -EBUSY;
-			goto out;
-		}
-		spi->dma_rx = sdd->rx_dma.ch;
-
-		sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
-				   sdd->cntrlr_info->dma_tx, dev, "tx");
-		if (!sdd->tx_dma.ch) {
-			dev_err(dev, "Failed to get TX DMA channel\n");
-			ret = -EBUSY;
-			goto out_rx;
-		}
-		spi->dma_tx = sdd->tx_dma.ch;
+	if (is_polling(sdd))
+		return 0;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Acquire DMA channels */
+	sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
+			   sdd->cntrlr_info->dma_rx, dev, "rx");
+	if (!sdd->rx_dma.ch) {
+		dev_err(dev, "Failed to get RX DMA channel\n");
+		return -EBUSY;
 	}
+	spi->dma_rx = sdd->rx_dma.ch;
 
-	return 0;
+	sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
+			   sdd->cntrlr_info->dma_tx, dev, "tx");
+	if (!sdd->tx_dma.ch) {
+		dev_err(dev, "Failed to get TX DMA channel\n");
+		dma_release_channel(sdd->rx_dma.ch);
+		return -EBUSY;
+	}
+	spi->dma_tx = sdd->tx_dma.ch;
 
-out_rx:
-	dma_release_channel(sdd->rx_dma.ch);
-out:
-	return ret;
+	return 0;
 }
 
 static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
-- 
2.8.1

      reply	other threads:[~2016-06-30 12:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-17  7:57 [PATCH 0/5] SPI CS line logical change and s3c64xx code rework Andi Shyti
2016-06-17  7:57 ` [PATCH 1/5] spi: do not fail if the CS line is not connected Andi Shyti
2016-06-17 10:47   ` Mark Brown
2016-06-17 11:36     ` Andi Shyti
2016-06-17 12:28       ` Mark Brown
2016-06-19  6:09         ` Andi Shyti
2016-06-26 12:48           ` Mark Brown
2016-06-27 10:57             ` Andi Shyti
2016-06-27 13:06               ` Mark Brown
2016-06-27 14:08                 ` Andi Shyti
2016-06-17  7:57 ` [PATCH 2/5] spi: s3c64xx: group the CS signalling writes in a single function Andi Shyti
2016-06-30 12:15   ` Applied "spi: s3c64xx: group the CS signalling writes in a single function" to the spi tree Mark Brown
2016-06-17  7:57 ` [PATCH 3/5] spi: s3c64xx: consider the case where the CS line is not connected Andi Shyti
2016-06-17  7:57 ` [PATCH 4/5] spi: s3c64xx: do not configure the device twice Andi Shyti
2016-06-30 12:15   ` Applied "spi: s3c64xx: do not configure the device twice" to the spi tree Mark Brown
2016-06-17  7:57 ` [PATCH 5/5] spi: s3c63xx: simplify if statement in prepare_transfer function Andi Shyti
2016-06-30 12:15   ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1bIasg-0001CB-06@finisterre \
    --to=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox