From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "ASoC: sun4i-codec: Add custom regmap configs" to the asoc tree
Date: Sat, 24 Sep 2016 22:58:48 -0700 [thread overview]
Message-ID: <E1bo2Se-00033P-Gr@finisterre> (raw)
In-Reply-To: <20160922071313.12891-4-dannym@scratchpost.org>
The patch
ASoC: sun4i-codec: Add custom regmap configs
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From c1d5065a0bd09bac783120b73bfa768ba6a493d9 Mon Sep 17 00:00:00 2001
From: Danny Milosavljevic <dannym@scratchpost.org>
Date: Thu, 22 Sep 2016 09:13:13 +0200
Subject: [PATCH] ASoC: sun4i-codec: Add custom regmap configs
The A20 has a few extra registers that the A10 doesn't have.
Therefore, use different regmaps for A10 as compared to A20.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/sunxi/sun4i-codec.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 9d8c027f7c55..eb6808842208 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -680,12 +680,37 @@ static const struct regmap_config sun4i_codec_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
+ .max_register = SUN4I_CODEC_ADC_RXCNT,
+};
+
+static const struct regmap_config sun7i_codec_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
.max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
};
+struct sun4i_codec_quirks {
+ const struct regmap_config *regmap_config;
+};
+
+static const struct sun4i_codec_quirks sun4i_codec_quirks = {
+ .regmap_config = &sun4i_codec_regmap_config,
+};
+
+static const struct sun4i_codec_quirks sun7i_codec_quirks = {
+ .regmap_config = &sun7i_codec_regmap_config,
+};
+
static const struct of_device_id sun4i_codec_of_match[] = {
- { .compatible = "allwinner,sun4i-a10-codec" },
- { .compatible = "allwinner,sun7i-a20-codec" },
+ {
+ .compatible = "allwinner,sun4i-a10-codec",
+ .data = &sun4i_codec_quirks,
+ },
+ {
+ .compatible = "allwinner,sun7i-a20-codec",
+ .data = &sun7i_codec_quirks,
+ },
{}
};
MODULE_DEVICE_TABLE(of, sun4i_codec_of_match);
@@ -758,6 +783,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
{
struct snd_soc_card *card;
struct sun4i_codec *scodec;
+ const struct sun4i_codec_quirks *quirks;
struct resource *res;
void __iomem *base;
int ret;
@@ -775,8 +801,14 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return PTR_ERR(base);
}
+ quirks = of_device_get_match_data(&pdev->dev);
+ if (quirks == NULL) {
+ dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+ return -ENODEV;
+ }
+
scodec->regmap = devm_regmap_init_mmio(&pdev->dev, base,
- &sun4i_codec_regmap_config);
+ quirks->regmap_config);
if (IS_ERR(scodec->regmap)) {
dev_err(&pdev->dev, "Failed to create our regmap\n");
return PTR_ERR(scodec->regmap);
--
2.9.3
next prev parent reply other threads:[~2016-09-25 5:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-22 7:13 [PATCH v5 0/3] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-09-22 7:13 ` [PATCH v5 1/3] ASoC: sun4i-codec: Rename sun4i_codec_widgets for consistency Danny Milosavljevic
2016-09-23 13:02 ` Maxime Ripard
2016-09-22 7:13 ` [PATCH v5 2/3] ASoC: sun4i-codec: Rename some sun7i-only registers Danny Milosavljevic
2016-09-22 8:29 ` Maxime Ripard
2016-09-22 7:13 ` [PATCH v5 3/3] ASoC: sun4i-codec: Add custom regmap configs Danny Milosavljevic
2016-09-22 8:29 ` Maxime Ripard
2016-09-25 5:58 ` Mark Brown [this message]
2016-09-22 8:31 ` [PATCH v5 0/3] ASoC: sun4i-codec: Distinguish sun4i from sun7i Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1bo2Se-00033P-Gr@finisterre \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox