From mboxrd@z Thu Jan 1 00:00:00 1970 From: rmk+kernel@armlinux.org.uk (Russell King) Date: Sun, 23 Oct 2016 20:10:44 +0100 Subject: [PATCH RFC 04/10] drm/i2c: tda998x: correct function name in comments In-Reply-To: <20161023191002.GJ1041@n2100.armlinux.org.uk> References: <20161023191002.GJ1041@n2100.armlinux.org.uk> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Correct two references to tda998x_connector_get_modes() which were incorrectly referring to tda998x_encoder_get_modes(). Signed-off-by: Russell King --- drivers/gpu/drm/i2c/tda998x_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 858237f7f4d6..134cd3f26a07 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -581,9 +581,9 @@ tda998x_reset(struct tda998x_priv *priv) * HPD assertion: it needs a delay of 100ms to avoid timing out while * trying to read EDID data. * - * However, tda998x_encoder_get_modes() may be called at any moment + * However, tda998x_connector_get_modes() may be called at any moment * after tda998x_connector_detect() indicates that we are connected, so - * we need to delay probing modes in tda998x_encoder_get_modes() after + * we need to delay probing modes in tda998x_connector_get_modes() after * we have seen a HPD inactive->active transition. This code implements * that delay. */ -- 2.1.0