From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "ASoC: sun4i-codec: Enable bus clock after getting GPIO" to the asoc tree
Date: Wed, 02 Nov 2016 10:50:48 -0600 [thread overview]
Message-ID: <E1c1ykS-0006Gt-1N@finisterre> (raw)
In-Reply-To: <20161101063155.15826-1-wens@csie.org>
The patch
ASoC: sun4i-codec: Enable bus clock after getting GPIO
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 3716a891d65cc04217da1af5f2bccb7eaf6092c2 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Tue, 1 Nov 2016 14:31:55 +0800
Subject: [PATCH] ASoC: sun4i-codec: Enable bus clock after getting GPIO
In the current probe function the GPIO is acquired after the codec's
bus clock is enabled. However if it fails to acquire the GPIO due to
a deferred probe, it does not disable the bus clock before bailing out.
This would result in the clock being enabled multiple times.
Move the code that enables the bus clock after the part that gets the
GPIO, maintaining a separation between resource acquisition and device
enablement in the probe function.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/sunxi/sun4i-codec.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index a60707761abf..56ed9472e89f 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -829,12 +829,6 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return PTR_ERR(scodec->clk_module);
}
- /* Enable the bus clock */
- if (clk_prepare_enable(scodec->clk_apb)) {
- dev_err(&pdev->dev, "Failed to enable the APB clock\n");
- return -EINVAL;
- }
-
scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "allwinner,pa",
GPIOD_OUT_LOW);
if (IS_ERR(scodec->gpio_pa)) {
@@ -844,6 +838,12 @@ static int sun4i_codec_probe(struct platform_device *pdev)
return ret;
}
+ /* Enable the bus clock */
+ if (clk_prepare_enable(scodec->clk_apb)) {
+ dev_err(&pdev->dev, "Failed to enable the APB clock\n");
+ return -EINVAL;
+ }
+
/* DMA configuration for TX FIFO */
scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
scodec->playback_dma_data.maxburst = 4;
--
2.10.1
prev parent reply other threads:[~2016-11-02 16:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-01 6:31 [PATCH] ASoC: sun4i-codec: Enable bus clock after getting GPIO Chen-Yu Tsai
2016-11-02 8:44 ` Maxime Ripard
2016-11-02 16:50 ` Mark Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1c1ykS-0006Gt-1N@finisterre \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox