From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "ASoC: sunxi: i2s: Implement set_sysclk" to the asoc tree
Date: Wed, 09 Nov 2016 14:59:36 +0000 [thread overview]
Message-ID: <E1c4ULg-0002gc-Hx@finisterre> (raw)
In-Reply-To: <e86d676f28ff62bc0a56741f76afb2cbdfedbdd8.1478524066.git-series.maxime.ripard@free-electrons.com>
The patch
ASoC: sunxi: i2s: Implement set_sysclk
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From b2b7b56f713ab833413548b119c53bbe2a9a9f8f Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Mon, 7 Nov 2016 14:08:19 +0100
Subject: [PATCH] ASoC: sunxi: i2s: Implement set_sysclk
In our i2s driver, we were previously trying to guess which oversample the
user wanted to use by looking at the rate and trying to max it.
However, the cards, and especially simple-card with its mclk-fs property
will already provide the expected oversample ratio by using the set_sysclk
callback.
We can thus implement it and remove the logic to deal with the runtime
guess.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/sunxi/sun4i-i2s.c | 53 ++++++++++++++++++++++++++++++++-------------
1 file changed, 38 insertions(+), 15 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index a7653114e895..f24d19526603 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -93,6 +93,8 @@ struct sun4i_i2s {
struct clk *mod_clk;
struct regmap *regmap;
+ unsigned int mclk_freq;
+
struct snd_dmaengine_dai_dma_data capture_dma_data;
struct snd_dmaengine_dai_dma_data playback_dma_data;
};
@@ -158,14 +160,24 @@ static int sun4i_i2s_get_mclk_div(struct sun4i_i2s *i2s,
}
static int sun4i_i2s_oversample_rates[] = { 128, 192, 256, 384, 512, 768 };
+static bool sun4i_i2s_oversample_is_valid(unsigned int oversample)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sun4i_i2s_oversample_rates); i++)
+ if (sun4i_i2s_oversample_rates[i] == oversample)
+ return true;
+
+ return false;
+}
static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s,
unsigned int rate,
unsigned int word_size)
{
- unsigned int clk_rate;
+ unsigned int oversample_rate, clk_rate;
int bclk_div, mclk_div;
- int ret, i;
+ int ret;
switch (rate) {
case 176400:
@@ -197,21 +209,18 @@ static int sun4i_i2s_set_clk_rate(struct sun4i_i2s *i2s,
if (ret)
return ret;
- /* Always favor the highest oversampling rate */
- for (i = (ARRAY_SIZE(sun4i_i2s_oversample_rates) - 1); i >= 0; i--) {
- unsigned int oversample_rate = sun4i_i2s_oversample_rates[i];
-
- bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
- word_size);
- mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
- clk_rate,
- rate);
+ oversample_rate = i2s->mclk_freq / rate;
+ if (!sun4i_i2s_oversample_is_valid(oversample_rate))
+ return -EINVAL;
- if ((bclk_div >= 0) && (mclk_div >= 0))
- break;
- }
+ bclk_div = sun4i_i2s_get_bclk_div(i2s, oversample_rate,
+ word_size);
+ if (bclk_div < 0)
+ return -EINVAL;
- if ((bclk_div < 0) || (mclk_div < 0))
+ mclk_div = sun4i_i2s_get_mclk_div(i2s, oversample_rate,
+ clk_rate, rate);
+ if (mclk_div < 0)
return -EINVAL;
regmap_write(i2s->regmap, SUN4I_I2S_CLK_DIV_REG,
@@ -481,9 +490,23 @@ static void sun4i_i2s_shutdown(struct snd_pcm_substream *substream,
regmap_write(i2s->regmap, SUN4I_I2S_CTRL_REG, 0);
}
+static int sun4i_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir)
+{
+ struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+ if (clk_id != 0)
+ return -EINVAL;
+
+ i2s->mclk_freq = freq;
+
+ return 0;
+}
+
static const struct snd_soc_dai_ops sun4i_i2s_dai_ops = {
.hw_params = sun4i_i2s_hw_params,
.set_fmt = sun4i_i2s_set_fmt,
+ .set_sysclk = sun4i_i2s_set_sysclk,
.shutdown = sun4i_i2s_shutdown,
.startup = sun4i_i2s_startup,
.trigger = sun4i_i2s_trigger,
--
2.10.2
next prev parent reply other threads:[~2016-11-09 14:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 13:08 [PATCH 0/3] ARM: gr8: evb: Enable the i2s codec Maxime Ripard
2016-11-07 13:08 ` [PATCH 1/3] ASoC: sunxi: i2s: Implement set_sysclk Maxime Ripard
2016-11-09 14:59 ` Mark Brown [this message]
2016-11-07 13:08 ` [PATCH 2/3] ASoC: wm8978: Adjust clock indices so that simple card works Maxime Ripard
2016-11-09 14:59 ` Applied "ASoC: wm8978: Adjust clock indices so that simple card works" to the asoc tree Mark Brown
2016-11-07 13:08 ` [PATCH 3/3] ARM: gr8: evb: Add i2s codec Maxime Ripard
2016-11-07 14:11 ` Chen-Yu Tsai
2016-11-08 7:44 ` Maxime Ripard
2016-11-08 7:57 ` Chen-Yu Tsai
2016-11-08 20:39 ` Maxime Ripard
2016-11-10 10:53 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1c4ULg-0002gc-Hx@finisterre \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox