[PATCH 1/9] ARM: dts: armada388-clearfog: move SPI flash into microsom

[rmk+kernel@armlinux.org.uk (Russell King)]

The optional SPI flash is fitted to the microsom, not the clearfog
board, so it should be specified in the microsom DTS include file.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 arch/arm/boot/dts/armada-388-clearfog.dts           | 14 ++------------
 arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 14 ++++++++++++++
 2 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 3e7c3a6237c3..3980d05f5ece 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -423,9 +423,8 @@
 
 &spi1 {
 	/*
-	 * We don't seem to have the W25Q32 on the
-	 * A1 Rev 2.0 boards, so disable SPI.
-	 * CS0: W25Q32 (doesn't appear to be present)
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32 (not populated on uSOM)
 	 * CS1:
 	 * CS2: mikrobus
 	 */
@@ -434,13 +433,4 @@
 		     &mikro_spi_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-
-	spi-flash at 0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <3000000>;
-		status = "disabled";
-	};
 };
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 8c9842237b60..8a84fe3e9c28 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -126,3 +126,17 @@
 
 	};
 };
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: spi-flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
-- 
2.7.4