From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "ASoC: qdsp6: q6afe-dai: add support to slim tx dais" to the asoc tree
Date: Wed, 04 Jul 2018 15:41:59 +0100 [thread overview]
Message-ID: <E1faiyl-0003ye-F9@debutante> (raw)
In-Reply-To: <20180704094944.16440-3-srinivas.kandagatla@linaro.org>
The patch
ASoC: qdsp6: q6afe-dai: add support to slim tx dais
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From f03d6b1b4d2460a749fb2826aa71e15a66104a88 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Wed, 4 Jul 2018 10:49:40 +0100
Subject: [PATCH] ASoC: qdsp6: q6afe-dai: add support to slim tx dais
This patch adds support to SLIMbus TX dais in AFE module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 175 ++++++++++++++++++++++++++++---
1 file changed, 161 insertions(+), 14 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index 1d2e5013c121..8dd3683eb367 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -382,23 +382,31 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai,
struct q6afe_port_config *pcfg = &dai_data->port_config[dai->id];
int i;
- if (!rx_slot) {
- pr_err("%s: rx slot not found\n", __func__);
- return -EINVAL;
- }
+ if (dai->id & 0x1) {
+ /* TX */
+ if (!tx_slot) {
+ pr_err("%s: tx slot not found\n", __func__);
+ return -EINVAL;
+ }
- for (i = 0; i < rx_num; i++) {
- pcfg->slim.ch_mapping[i] = rx_slot[i];
- pr_debug("%s: find number of channels[%d] ch[%d]\n",
- __func__, i, rx_slot[i]);
- }
+ for (i = 0; i < tx_num; i++)
+ pcfg->slim.ch_mapping[i] = tx_slot[i];
+
+ pcfg->slim.num_channels = tx_num;
+
+
+ } else {
+ if (!rx_slot) {
+ pr_err("%s: rx slot not found\n", __func__);
+ return -EINVAL;
+ }
- pcfg->slim.num_channels = rx_num;
+ for (i = 0; i < rx_num; i++)
+ pcfg->slim.ch_mapping[i] = rx_slot[i];
- pr_debug("%s: SLIMBUS_%d_RX cnt[%d] ch[%d %d]\n", __func__,
- (dai->id - SLIMBUS_0_RX) / 2, rx_num,
- pcfg->slim.ch_mapping[0],
- pcfg->slim.ch_mapping[1]);
+ pcfg->slim.num_channels = rx_num;
+
+ }
return 0;
}
@@ -443,6 +451,14 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
{"Slimbus5 Playback", NULL, "SLIMBUS_5_RX"},
{"Slimbus6 Playback", NULL, "SLIMBUS_6_RX"},
+ {"SLIMBUS_0_TX", NULL, "Slimbus Capture"},
+ {"SLIMBUS_1_TX", NULL, "Slimbus1 Capture"},
+ {"SLIMBUS_2_TX", NULL, "Slimbus2 Capture"},
+ {"SLIMBUS_3_TX", NULL, "Slimbus3 Capture"},
+ {"SLIMBUS_4_TX", NULL, "Slimbus4 Capture"},
+ {"SLIMBUS_5_TX", NULL, "Slimbus5 Capture"},
+ {"SLIMBUS_6_TX", NULL, "Slimbus6 Capture"},
+
{"Primary MI2S Playback", NULL, "PRI_MI2S_RX"},
{"Secondary MI2S Playback", NULL, "SEC_MI2S_RX"},
{"Tertiary MI2S Playback", NULL, "TERT_MI2S_RX"},
@@ -636,6 +652,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.rate_min = 8000,
.rate_max = 192000,
},
+ }, {
+ .name = "SLIMBUS_0_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_0_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus1 Playback",
@@ -654,6 +688,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_1_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+ }, {
+ .name = "SLIMBUS_1_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_1_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus1 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus2 Playback",
@@ -672,6 +724,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_2_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+
+ }, {
+ .name = "SLIMBUS_2_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_2_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus2 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus3 Playback",
@@ -690,6 +761,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_3_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+
+ }, {
+ .name = "SLIMBUS_3_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_3_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus3 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus4 Playback",
@@ -708,6 +798,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_4_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+
+ }, {
+ .name = "SLIMBUS_4_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_4_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus4 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus5 Playback",
@@ -726,6 +835,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_5_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+
+ }, {
+ .name = "SLIMBUS_5_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_5_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus5 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Slimbus6 Playback",
@@ -744,6 +872,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
.id = SLIMBUS_6_RX,
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
+
+ }, {
+ .name = "SLIMBUS_6_TX",
+ .ops = &q6slim_ops,
+ .id = SLIMBUS_6_TX,
+ .probe = msm_dai_q6_dai_probe,
+ .remove = msm_dai_q6_dai_remove,
+ .capture = {
+ .stream_name = "Slimbus6 Capture",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
}, {
.playback = {
.stream_name = "Primary MI2S Playback",
--
2.18.0.rc2
next prev parent reply other threads:[~2018-07-04 14:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-04 9:49 [PATCH 0/6] ASoC: qdsp6: Add missing slimbus capture support Srinivas Kandagatla
2018-07-04 9:49 ` [PATCH 1/6] ASoC: qdsp6: q6afe: Add missing slimbus capture ports Srinivas Kandagatla
2018-07-04 14:42 ` Applied "ASoC: qdsp6: q6afe: Add missing slimbus capture ports" to the asoc tree Mark Brown
2018-07-04 9:49 ` [PATCH 2/6] ASoC: qdsp6: q6afe-dai: add support to slim tx dais Srinivas Kandagatla
2018-07-04 14:41 ` Mark Brown [this message]
2018-07-04 9:49 ` [PATCH 3/6] ASoC: qdsp6: q6routing: add slim rx routings Srinivas Kandagatla
2018-07-04 14:41 ` Applied "ASoC: qdsp6: q6routing: add slim rx routings" to the asoc tree Mark Brown
2018-07-04 9:49 ` [PATCH 4/6] ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels Srinivas Kandagatla
2018-07-04 14:41 ` Applied "ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels" to the asoc tree Mark Brown
2018-07-04 9:49 ` [PATCH 5/6] ASoC: qdsp6: q6afe-dai: do not close port if its not opened Srinivas Kandagatla
2018-07-04 14:35 ` Applied "ASoC: qdsp6: q6afe-dai: do not close port if its not opened" to the asoc tree Mark Brown
2018-07-04 9:49 ` [PATCH 6/6] ASoC: qdsp6: q6asm-dai: do not close port if its not opened Srinivas Kandagatla
2018-07-04 14:35 ` Applied "ASoC: qdsp6: q6asm-dai: do not close port if its not opened" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1faiyl-0003ye-F9@debutante \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox