[PATCH net-next] net: gemini: allow any RGMII interface mode

[PATCH net-next] net: gemini: allow any RGMII interface mode

[Russell King (Oracle)]

The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.

However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 07add311f65d..c78b99a497df 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -305,21 +305,21 @@ static void gmac_speed_set(struct net_device *netdev)
 	switch (phydev->speed) {
 	case 1000:
 		status.bits.speed = GMAC_SPEED_1000;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
 		netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
 			   phydev_name(phydev));
 		break;
 	case 100:
 		status.bits.speed = GMAC_SPEED_100;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
 			   phydev_name(phydev));
 		break;
 	case 10:
 		status.bits.speed = GMAC_SPEED_10;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
 			   phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
 		status.bits.mii_rmii = GMAC_PHY_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		netdev_dbg(netdev,
 			   "RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
 		status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next] net: gemini: allow any RGMII interface mode

[Linus Walleij]

On Tue, Jan 4, 2022 at 5:38 PM Russell King (Oracle)
<rmk+kernel@armlinux.org.uk> wrote:

> The four RGMII interface modes take care of the required RGMII delay
> configuration at the PHY and should not be limited by the network MAC
> driver. Sadly, gemini was only permitting RGMII mode with no delays,
> which would require the required delay to be inserted via PCB tracking
> or by the MAC.
>
> However, there are designs that require the PHY to add the delay, which
> is impossible without Gemini permitting the other three PHY interface
> modes. Fix the driver to allow these.
>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Excellent root-cause analysis of this and thanks!
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next] net: gemini: allow any RGMII interface mode

[Corentin Labbe]

Le Tue, Jan 04, 2022 at 04:38:31PM +0000, Russell King (Oracle) a écrit :
> The four RGMII interface modes take care of the required RGMII delay
> configuration at the PHY and should not be limited by the network MAC
> driver. Sadly, gemini was only permitting RGMII mode with no delays,
> which would require the required delay to be inserted via PCB tracking
> or by the MAC.
> 
> However, there are designs that require the PHY to add the delay, which
> is impossible without Gemini permitting the other three PHY interface
> modes. Fix the driver to allow these.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
>  drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)

Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>

Thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net-next] net: gemini: allow any RGMII interface mode

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Tue, 04 Jan 2022 16:38:31 +0000 you wrote:
> The four RGMII interface modes take care of the required RGMII delay
> configuration at the PHY and should not be limited by the network MAC
> driver. Sadly, gemini was only permitting RGMII mode with no delays,
> which would require the required delay to be inserted via PCB tracking
> or by the MAC.
> 
> However, there are designs that require the PHY to add the delay, which
> is impossible without Gemini permitting the other three PHY interface
> modes. Fix the driver to allow these.
> 
> [...]

Here is the summary with links:
  - [net-next] net: gemini: allow any RGMII interface mode
    https://git.kernel.org/netdev/net-next/c/4e4f325a0a55

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel