linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	"Alvin __ipraga" <alsi@bang-olufsen.dk>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	DENG Qingfang <dqfext@gmail.com>,
	Eric Dumazet <edumazet@google.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	George McCollister <george.mccollister@gmail.com>,
	Hauke Mehrtens <hauke@hauke-m.de>,
	Jakub Kicinski <kuba@kernel.org>,
	Kurt Kanzenbach <kurt@linutronix.de>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Sean Wang <sean.wang@mediatek.com>,
	UNGLinuxDriver@microchip.com,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	Woojung Huh <woojung.huh@microchip.com>
Subject: [PATCH RFC net-next 3/4] net: phylink: add phylink_set_max_fixed_link()
Date: Fri, 24 Jun 2022 12:42:04 +0100	[thread overview]
Message-ID: <E1o4hhM-004Aoy-Df@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YrWi5oBFn7vR15BH@shell.armlinux.org.uk>

Add a function for DSA to use to configure phylink, in the absence of
any other configuration, to a fixed link operating at the maximum
supported link speed.

This is needed so we can support phylink usage on CPU and DSA ports.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 83 +++++++++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  2 +
 2 files changed, 85 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e20cdab824db..bd9f09cfc281 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1317,6 +1317,89 @@ void phylink_destroy(struct phylink *pl)
 }
 EXPORT_SYMBOL_GPL(phylink_destroy);
 
+static struct {
+	unsigned long fd_mask;
+	unsigned long hd_mask;
+	int speed;
+} phylink_caps_speeds[] = {
+	{ MAC_400000FD, 0,          SPEED_400000 },
+	{ MAC_200000FD, 0,          SPEED_200000 },
+	{ MAC_100000FD, 0,          SPEED_100000 },
+	{ MAC_56000FD,  0,          SPEED_56000  },
+	{ MAC_50000FD,  0,          SPEED_50000  },
+	{ MAC_40000FD,  0,          SPEED_40000  },
+	{ MAC_25000FD,  0,          SPEED_40000  },
+	{ MAC_20000FD,  0,          SPEED_20000  },
+	{ MAC_10000FD,  0,          SPEED_10000  },
+	{ MAC_5000FD,   0,          SPEED_5000   },
+	{ MAC_2500FD,   0,          SPEED_2500   },
+	{ MAC_1000FD,   MAC_1000HD, SPEED_1000   },
+	{ MAC_100FD,    MAC_100HD,  SPEED_100    },
+	{ MAC_10FD,     MAC_10HD,   SPEED_10     },
+};
+
+/**
+ * phylink_set_max_fixed_link() - set a fixed link configuration for phylink
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Set a maximum speed fixed-link configuration for the chosen interface
+ * mode and MAC capabilities for the phylink instance. Only valid for use
+ * immediately after creation. Must not be used at any other time.
+ *
+ * The user must have initialised mac_capabilities and set a valid interface.
+ */
+int phylink_set_max_fixed_link(struct phylink *pl)
+{
+	unsigned long caps;
+	int speed, duplex;
+	int i;
+
+	/* If we are not in PHY mode, or have a PHY, or have a SFP bus,
+	 * then we must not default to a fixed link.
+	 */
+	if (pl->cfg_link_an_mode != MLO_AN_PHY || pl->phydev || pl->sfp_bus)
+		return -EBUSY;
+
+	/* Get the speed/duplex capabilities and reduce according to the
+	 * interface mode.
+	 */
+	caps = pl->config->mac_capabilities;
+	caps &= ~(MAC_SYM_PAUSE | MAC_ASYM_PAUSE);
+	caps &= phylink_interface_to_caps(pl->link_config.interface);
+
+	/* If there are no capabilities, then we are not using this default. */
+	if (!caps)
+		return -EINVAL;
+
+	/* Decode to fastest speed and duplex */
+	duplex = DUPLEX_UNKNOWN;
+	speed = SPEED_UNKNOWN;
+	for (i = 0; i < ARRAY_SIZE(phylink_caps_speeds); i++) {
+		if (caps & phylink_caps_speeds[i].fd_mask) {
+			duplex = DUPLEX_FULL;
+			speed = phylink_caps_speeds[i].speed;
+			break;
+		} else if (caps & phylink_caps_speeds[i].hd_mask) {
+			duplex = DUPLEX_HALF;
+			speed = phylink_caps_speeds[i].speed;
+			break;
+		}
+	}
+
+	/* If we didn't find anything, bail. */
+	if (speed == SPEED_UNKNOWN)
+		return -EINVAL;
+
+	pl->link_config.speed = speed;
+	pl->link_config.duplex = duplex;
+	pl->link_config.link = 1;
+	pl->cfg_link_an_mode = MLO_AN_FIXED;
+	pl->cur_link_an_mode = MLO_AN_FIXED;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(phylink_set_max_fixed_link);
+
 static void phylink_phy_change(struct phy_device *phydev, bool up)
 {
 	struct phylink *pl = phydev->phylink;
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 6d06896fc20d..145fec38ad90 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -529,6 +529,8 @@ struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
 			       const struct phylink_mac_ops *mac_ops);
 void phylink_destroy(struct phylink *);
 
+int phylink_set_max_fixed_link(struct phylink *pl);
+
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
 int phylink_fwnode_phy_connect(struct phylink *pl,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-06-24 11:43 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24 11:41 [PATCH RFC net-next 0/4] net: dsa: always use phylink Russell King (Oracle)
2022-06-24 11:41 ` [PATCH RFC net-next 1/4] net: dsa: add support for retrieving the interface mode Russell King (Oracle)
2022-06-24 11:41 ` [PATCH RFC net-next 2/4] net: dsa: mv88e6xxx: report the default interface mode for the port Russell King (Oracle)
2022-06-24 11:42 ` Russell King (Oracle) [this message]
2022-06-24 11:42 ` [PATCH RFC net-next 4/4] net: dsa: always use phylink for CPU and DSA ports Russell King (Oracle)
2022-06-28 21:16 ` [PATCH RFC net-next 0/4] net: dsa: always use phylink Russell King (Oracle)
2022-06-29  7:18   ` Andrew Lunn
2022-06-29  9:27     ` Marek Behún
2022-06-29  9:34       ` Russell King (Oracle)
2022-06-29  9:42         ` Marek Behún
2022-06-29  9:43     ` Russell King (Oracle)
2022-06-29 10:10       ` Marek Behún
2022-06-29 12:41         ` Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1o4hhM-004Aoy-Df@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Landen.Chao@mediatek.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alsi@bang-olufsen.dk \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=george.mccollister@gmail.com \
    --cc=hauke@hauke-m.de \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kurt@linutronix.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    --cc=woojung.huh@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).