From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Daniel Machon <daniel.machon@microchip.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Horatiu Vultur <horatiu.vultur@microchip.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Jakub Kicinski <kuba@kernel.org>,
Lars Povlsen <lars.povlsen@microchip.com>,
linux-arm-kernel@lists.infradead.org,
Madalin Bucur <madalin.bucur@nxp.com>,
Marcin Wojtas <mw@semihalf.com>,
Michal Simek <michal.simek@amd.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
Sean Anderson <sean.anderson@seco.com>,
Steen Hegelund <Steen.Hegelund@microchip.com>,
Taras Chornyi <taras.chornyi@plvision.eu>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
UNGLinuxDriver@microchip.com, Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH RFC net-next 3/9] net: phylink: pass aneg_mode into phylink_mii_c22_pcs_config()
Date: Tue, 23 May 2023 16:55:20 +0100 [thread overview]
Message-ID: <E1q1UM4-007FSo-74@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <ZGzhvePzPjJ0v2En@shell.armlinux.org.uk>
Pass the aneg_mode into phylink_mii_c22_pcs_config() in preparation
to moving it up as a parameter passed to the pcs_config() method.
In doing so, we no longer need to pass the MLO_AN_* mode to this
function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
.../net/ethernet/freescale/fman/fman_dtsec.c | 7 +++++--
.../net/ethernet/xilinx/xilinx_axienet_main.c | 5 ++++-
drivers/net/pcs/pcs-lynx.c | 18 ++++++++++++------
drivers/net/phy/phylink.c | 9 ++++-----
include/linux/phylink.h | 5 +++--
5 files changed, 28 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fman/fman_dtsec.c b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
index d528ca681b6f..e6a5a7f03dbe 100644
--- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c
+++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
@@ -769,9 +769,12 @@ static int dtsec_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
bool permit_pause_to_mac)
{
struct fman_mac *dtsec = pcs_to_dtsec(pcs);
+ unsigned int neg_mode;
- return phylink_mii_c22_pcs_config(dtsec->tbidev, mode, interface,
- advertising);
+ neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
+
+ return phylink_mii_c22_pcs_config(dtsec->tbidev, interface,
+ advertising, neg_mode);
}
static void dtsec_pcs_an_restart(struct phylink_pcs *pcs)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3e310b55bce2..380a4db686b7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1639,6 +1639,7 @@ static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
struct net_device *ndev = pcs_to_axienet_local(pcs)->ndev;
struct axienet_local *lp = netdev_priv(ndev);
+ unsigned int neg_mode;
int ret;
if (lp->switch_x_sgmii) {
@@ -1653,7 +1654,9 @@ static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
}
}
- ret = phylink_mii_c22_pcs_config(pcs_phy, mode, interface, advertising);
+ neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
+ ret = phylink_mii_c22_pcs_config(pcs_phy, interface, advertising,
+ neg_mode);
if (ret < 0)
netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index 622c3de3f3a8..5a0de1fcb833 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -119,9 +119,10 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
state->link, state->an_complete);
}
-static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
+static int lynx_pcs_config_giga(struct mdio_device *pcs,
phy_interface_t interface,
- const unsigned long *advertising)
+ const unsigned long *advertising,
+ unsigned int neg_mode)
{
int link_timer_ns;
u32 link_timer;
@@ -139,8 +140,9 @@ static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
if (interface == PHY_INTERFACE_MODE_1000BASEX) {
if_mode = 0;
} else {
+ /* SGMII and QSGMII */
if_mode = IF_MODE_SGMII_EN;
- if (mode == MLO_AN_INBAND)
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
if_mode |= IF_MODE_USE_SGMII_AN;
}
@@ -150,7 +152,8 @@ static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
if (err)
return err;
- return phylink_mii_c22_pcs_config(pcs, mode, interface, advertising);
+ return phylink_mii_c22_pcs_config(pcs, interface, advertising,
+ neg_mode);
}
static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
@@ -177,13 +180,16 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
bool permit)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+ unsigned int neg_mode;
+
+ neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
switch (ifmode) {
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_QSGMII:
- return lynx_pcs_config_giga(lynx->mdio, mode, ifmode,
- advertising);
+ return lynx_pcs_config_giga(lynx->mdio, ifmode, advertising,
+ neg_mode);
case PHY_INTERFACE_MODE_2500BASEX:
if (phylink_autoneg_inband(mode)) {
dev_err(&lynx->mdio->dev,
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c800bdcddeb8..03e4ff8bf289 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -3509,20 +3509,20 @@ EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_encode_advertisement);
/**
* phylink_mii_c22_pcs_config() - configure clause 22 PCS
* @pcs: a pointer to a &struct mdio_device.
- * @mode: link autonegotiation mode
* @interface: the PHY interface mode being configured
* @advertising: the ethtool advertisement mask
+ * @neg_mode: PCS negotiation mode
*
* Configure a Clause 22 PCS PHY with the appropriate negotiation
* parameters for the @mode, @interface and @advertising parameters.
* Returns negative error number on failure, zero if the advertisement
* has not changed, or positive if there is a change.
*/
-int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
+int phylink_mii_c22_pcs_config(struct mdio_device *pcs,
phy_interface_t interface,
- const unsigned long *advertising)
+ const unsigned long *advertising,
+ unsigned int neg_mode)
{
- unsigned int neg_mode;
bool changed = 0;
u16 bmcr;
int ret, adv;
@@ -3536,7 +3536,6 @@ int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
changed = ret;
}
- neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
bmcr = BMCR_ANENABLE;
else
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index e3cb0b4eed1d..8510c922b3f4 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -727,9 +727,10 @@ void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
struct phylink_link_state *state);
int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface,
const unsigned long *advertising);
-int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
+int phylink_mii_c22_pcs_config(struct mdio_device *pcs,
phy_interface_t interface,
- const unsigned long *advertising);
+ const unsigned long *advertising,
+ unsigned int neg_mode);
void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs);
void phylink_resolve_c73(struct phylink_link_state *state);
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-23 15:55 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 15:54 [PATCH RFC 0/9] Add and use helper for PCS negotiation modes Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 1/9] net: phylink: add phylink_pcs_neg_mode() Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 2/9] net: phylink: use phylink_pcs_neg_mode() Russell King (Oracle)
2023-05-23 15:55 ` Russell King (Oracle) [this message]
2023-05-23 15:55 ` [PATCH RFC net-next 4/9] net: qca8k: switch PCS driver to " Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 5/9] net: mvneta: " Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 6/9] net: mvpp2: " Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 7/9] net: prestera: " Russell King (Oracle)
2023-05-24 11:38 ` [EXT] " Elad Nachman
2023-05-23 15:55 ` [PATCH RFC net-next 8/9] net: lan966x: " Russell King (Oracle)
2023-05-23 15:55 ` [PATCH RFC net-next 9/9] net: sparx5: " Russell King (Oracle)
2023-05-30 12:49 ` Daniel Machon
2023-05-24 7:26 ` [PATCH RFC 0/9] Add and use helper for PCS negotiation modes Horatiu Vultur
2023-05-24 8:10 ` Russell King (Oracle)
2023-05-25 8:15 ` Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1q1UM4-007FSo-74@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=Steen.Hegelund@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=daniel.machon@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=horatiu.vultur@microchip.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=lars.povlsen@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=madalin.bucur@nxp.com \
--cc=michal.simek@amd.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=radhey.shyam.pandey@xilinx.com \
--cc=sean.anderson@seco.com \
--cc=taras.chornyi@plvision.eu \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).