From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: andrew+netdev@lunn.ch,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
MaximeCoquelin <mcoquelin.stm32@gmail.com>,
xfr@outlook.com, Furong Xu<0x1207@gmail.com>,
Jon Hunter <jonathanh@nvidia.com>,
Thierry Reding <thierry.reding@gmail.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Simon Horman <horms@kernel.org>, Furong Xu <0x1207@gmail.com>,
Hariprasad Kelam <hkelam@marvell.com>
Subject: [PATCH net] net: stmmac: fix TSO DMA API usage causing oops
Date: Fri, 06 Dec 2024 12:40:11 +0000 [thread overview]
Message-ID: <E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk> (raw)
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9b262cdad60b..c81ea8cdfe6e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4192,8 +4192,8 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
struct stmmac_txq_stats *txq_stats;
struct stmmac_tx_queue *tx_q;
u32 pay_len, mss, queue;
+ dma_addr_t tso_des, des;
u8 proto_hdr_len, hdr;
- dma_addr_t des;
bool set_ic;
int i;
@@ -4289,14 +4289,15 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
/* If needed take extra descriptors to fill the remaining payload */
tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
+ tso_des = des;
} else {
stmmac_set_desc_addr(priv, first, des);
tmp_pay_len = pay_len;
- des += proto_hdr_len;
+ tso_des = des + proto_hdr_len;
pay_len = 0;
}
- stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
+ stmmac_tso_allocator(priv, tso_des, tmp_pay_len, (nfrags == 0), queue);
/* In case two or more DMA transmit descriptors are allocated for this
* non-paged SKB data, the DMA buffer address should be saved to
--
2.30.2
next reply other threads:[~2024-12-06 12:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-06 12:40 Russell King (Oracle) [this message]
2024-12-07 5:52 ` [PATCH net] net: stmmac: fix TSO DMA API usage causing oops Furong Xu
2024-12-08 1:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=0x1207@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkelam@marvell.com \
--cc=horms@kernel.org \
--cc=joabreu@synopsys.com \
--cc=jonathanh@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=thierry.reding@gmail.com \
--cc=xfr@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).