[PATCH net-next v2 2/9] net: stmmac: mediatek: remove of_get_phy_mode()

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

Initialise priv_plat->phy_mode from plat->phy_interface
inmediatek_dwmac_common_data().

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index c9636832a570..d178d5ddc7c7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -456,7 +456,6 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
 {
 	struct mac_delay_struct *mac_delay = &plat->mac_delay;
 	u32 tx_delay_ps, rx_delay_ps;
-	int err;
 
 	plat->peri_regmap = syscon_regmap_lookup_by_phandle(plat->np, "mediatek,pericfg");
 	if (IS_ERR(plat->peri_regmap)) {
@@ -464,12 +463,6 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
 		return PTR_ERR(plat->peri_regmap);
 	}
 
-	err = of_get_phy_mode(plat->np, &plat->phy_mode);
-	if (err) {
-		dev_err(plat->dev, "not find phy-mode\n");
-		return err;
-	}
-
 	if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) {
 		if (tx_delay_ps < plat->variant->tx_delay_max) {
 			mac_delay->tx_delay = tx_delay_ps;
@@ -587,6 +580,7 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
 {
 	int i;
 
+	priv_plat->phy_mode = plat->phy_interface;
 	plat->mac_interface = priv_plat->phy_mode;
 	if (priv_plat->mac_wol)
 		plat->flags &= ~STMMAC_FLAG_USE_PHY_WOL;
-- 
2.30.2