linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Gatien Chevallier <gatien.chevallier@foss.st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew@lunn.ch>, Andrew Lunn <andrew+netdev@lunn.ch>,
	Christophe Roullier <christophe.roullier@foss.st.com>,
	Conor Dooley <conor+dt@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	devicetree@vger.kernel.org, Eric Dumazet <edumazet@google.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>, Simon Horman <horms@kernel.org>,
	Tristram Ha <Tristram.Ha@microchip.com>
Subject: [PATCH RFC net-next 3/6] net: phylink: add phylink managed MAC Wake-on-Lan support
Date: Sun, 28 Sep 2025 09:59:04 +0100	[thread overview]
Message-ID: <E1v2nFI-00000007jXV-1BYa@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aNj4HY_mk4JDsD_D@shell.armlinux.org.uk>

Add core phylink Wake-on-Lan support.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 77 +++++++++++++++++++++++++++++++++++++--
 include/linux/phylink.h   | 26 +++++++++++++
 2 files changed, 99 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 9d7799ea1c17..9a3783e719bc 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -93,6 +93,9 @@ struct phylink {
 	u8 sfp_port;
 
 	struct eee_config eee_cfg;
+
+	u32 wolopts_mac;
+	u8 wol_sopass[SOPASS_MAX];
 };
 
 #define phylink_printk(level, pl, fmt, ...) \
@@ -2575,11 +2578,17 @@ EXPORT_SYMBOL_GPL(phylink_rx_clk_stop_unblock);
  *   can also bring down the link between the MAC and PHY.
  * - If Wake-on-Lan is active, but being handled by the MAC, the MAC
  *   still needs to receive packets, so we can not bring the link down.
+ *
+ * Note: when phylink managed Wake-on-Lan is in use, @mac_wol is ignored.
+ * (struct phylink_mac_ops.mac_set_wol populated.)
  */
 void phylink_suspend(struct phylink *pl, bool mac_wol)
 {
 	ASSERT_RTNL();
 
+	if (phylink_mac_supports_wol(pl))
+		mac_wol = !!pl->wolopts_mac;
+
 	if (mac_wol && (!pl->netdev || pl->netdev->ethtool->wol_enabled)) {
 		/* Wake-on-Lan enabled, MAC handling */
 		mutex_lock(&pl->state_mutex);
@@ -2673,6 +2682,17 @@ void phylink_resume(struct phylink *pl)
 }
 EXPORT_SYMBOL_GPL(phylink_resume);
 
+static bool phylink_mac_supports_wol(struct phylink *pl)
+{
+	return !!pl->mac_ops->mac_wol_set;
+}
+
+static bool phylink_phy_supports_wol(struct phylink *pl,
+				     struct phy_device *phydev)
+{
+	return phydev && (pl->config->wol_phy_legacy || phy_can_wakeup(phydev));
+}
+
 /**
  * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -2689,8 +2709,21 @@ void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
 	wol->supported = 0;
 	wol->wolopts = 0;
 
-	if (pl->phydev)
-		phy_ethtool_get_wol(pl->phydev, wol);
+	if (phylink_mac_supports_wol(pl)) {
+		if (phylink_phy_supports_wol(pl, pl->phydev))
+			phy_ethtool_get_wol(pl->phydev, wol);
+
+		/* Where the MAC augments the WoL support, merge its support and
+		 * current configuration.
+		 */
+		wol->supported |= pl->config->wol_mac_support;
+		wol->wolopts |= pl->wolopts_mac;
+		memcpy(wol->sopass, pl->wol_sopass, sizeof(wol->sopass));
+	} else {
+		/* Legacy */
+		if (pl->phydev)
+			phy_ethtool_get_wol(pl->phydev, wol);
+	}
 }
 EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
 
@@ -2707,12 +2740,48 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
  */
 int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
 {
+	struct ethtool_wolinfo w;
 	int ret = -EOPNOTSUPP;
+	bool changed;
+	u32 wolopts;
 
 	ASSERT_RTNL();
 
-	if (pl->phydev)
-		ret = phy_ethtool_set_wol(pl->phydev, wol);
+	if (phylink_mac_supports_wol(pl)) {
+		wolopts = wol->wolopts;
+
+		if (phylink_phy_supports_wol(pl, pl->phydev)) {
+			ret = phy_ethtool_set_wol(pl->phydev, wol);
+			if (ret != 0 && ret != -EOPNOTSUPP)
+				return ret;
+
+			phy_ethtool_get_wol(pl->phydev, &w);
+
+			/* Any Wake-on-Lan modes which the PHY is handling
+			 * should not be passed on to the MAC.
+			 */
+			wolopts &= ~w.wolopts;
+		}
+
+		wolopts &= pl->config->wol_mac_support;
+		changed = pl->wolopts_mac != wolopts;
+		if (wolopts & WAKE_MAGICSECURE)
+			changed |= !!memcmp(wol->sopass, pl->wol_sopass,
+					    sizeof(wol->sopass));
+		memcpy(pl->wol_sopass, wol->sopass, sizeof(pl->wol_sopass));
+
+		if (changed) {
+			ret = pl->mac_ops->mac_wol_set(pl->config, wolopts,
+						       wol->sopass);
+			if (!ret)
+				pl->wolopts_mac = wolopts;
+		} else {
+			ret = 0;
+		}
+	} else {
+		if (pl->phydev)
+			ret = phy_ethtool_set_wol(pl->phydev, wol);
+	}
 
 	return ret;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 9af0411761d7..59cb58b29d1d 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -156,6 +156,8 @@ enum phylink_op_type {
  * @lpi_capabilities: MAC speeds which can support LPI signalling
  * @lpi_timer_default: Default EEE LPI timer setting.
  * @eee_enabled_default: If set, EEE will be enabled by phylink at creation time
+ * @wol_phy_legacy: Use Wake-on-Lan with PHY even if phy_can_wakeup() is false
+ * @wol_mac_support: Bitmask of MAC supported %WAKE_* options
  */
 struct phylink_config {
 	struct device *dev;
@@ -173,6 +175,10 @@ struct phylink_config {
 	unsigned long lpi_capabilities;
 	u32 lpi_timer_default;
 	bool eee_enabled_default;
+
+	/* Wake-on-Lan support */
+	bool wol_phy_legacy;
+	u32 wol_mac_support;
 };
 
 void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
@@ -188,6 +194,7 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
  * @mac_link_up: allow the link to come up.
  * @mac_disable_tx_lpi: disable LPI.
  * @mac_enable_tx_lpi: enable and configure LPI.
+ * @mac_wol_set: configure Wake-on-Lan settings at the MAC.
  *
  * The individual methods are described more fully below.
  */
@@ -211,6 +218,9 @@ struct phylink_mac_ops {
 	void (*mac_disable_tx_lpi)(struct phylink_config *config);
 	int (*mac_enable_tx_lpi)(struct phylink_config *config, u32 timer,
 				 bool tx_clk_stop);
+
+	int (*mac_wol_set)(struct phylink_config *config, u32 wolopts,
+			   const u8 *sopass);
 };
 
 #if 0 /* For kernel-doc purposes only. */
@@ -440,6 +450,22 @@ void mac_disable_tx_lpi(struct phylink_config *config);
  */
 int mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 		      bool tx_clk_stop);
+
+/**
+ * mac_wol_set() - configure the Wake-on-Lan parameters
+ * @config: a pointer to a &struct phylink_config.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only for %WAKE_MAGICSECURE
+ *
+ * Enable the specified Wake-on-Lan options at the MAC. Options that the
+ * PHY can handle will have been removed from @wolopts.
+ *
+ * The presence of this method enables phylink-managed WoL support.
+ *
+ * Returns: 0 on success.
+ */
+int (*mac_wol_set)(struct phylink_config *config, u32 wolopts,
+		   const u8 *sopass);
 #endif
 
 struct phylink_pcs_ops;
-- 
2.47.3



  parent reply	other threads:[~2025-09-28  8:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-28  8:55 [PATCH RFC net-next 0/6] net: add phylink managed WoL and convert stmmac Russell King (Oracle)
2025-09-28  8:58 ` [PATCH RFC net-next 1/6] net: phy: add phy_can_wakeup() Russell King (Oracle)
2025-09-28  8:58 ` [PATCH RFC net-next 2/6] net: phy: add phy_may_wakeup() Russell King (Oracle)
2025-09-30  9:04   ` Gatien CHEVALLIER
2025-09-30 10:53     ` Russell King (Oracle)
2025-09-28  8:59 ` Russell King (Oracle) [this message]
2025-09-28  9:32   ` [PATCH RFC net-next 3/6] net: phylink: add phylink managed MAC Wake-on-Lan support Russell King (Oracle)
2025-09-28  8:59 ` [PATCH RFC net-next 4/6] net: phylink: add phylink managed wake-on-lan PHY speed control Russell King (Oracle)
2025-09-28  8:59 ` [PATCH RFC net-next 5/6] net: stmmac: convert to phylink-managed Wake-on-Lan Russell King (Oracle)
2025-09-28  8:59 ` [PATCH RFC net-next 6/6] net: stmmac: convert to phylink managed WoL PHY speed Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1v2nFI-00000007jXV-1BYa@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Tristram.Ha@microchip.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=christophe.roullier@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=gatien.chevallier@foss.st.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).