[PATCH net-next 12/15] net: stmmac: qcom-ethqos: simplify prg_rclk_dly programming

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Rather than coding the entire register update twice with different
values, use a local variable to specify the value and have one
register update statement that uses this local variable. This results
in neater code.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index c88c693137d6..f9d6e97f197a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -374,6 +374,7 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
+	unsigned int prg_rclk_dly;
 	int phase_shift;
 	int loopback;
 
@@ -461,16 +462,16 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 		 */
 		if (ethqos->has_emac_ge_3) {
 			/* 0.9 ns */
-			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-				      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-						 115), SDCC_HC_REG_DDR_CONFIG);
+			prg_rclk_dly = 115;
 		} else {
 			/* 1.8 ns */
-			rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-				      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
-						 57), SDCC_HC_REG_DDR_CONFIG);
+			prg_rclk_dly = 57;
 		}
 
+		rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+			      FIELD_PREP(SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+					 prg_rclk_dly), SDCC_HC_REG_DDR_CONFIG);
+
 		rgmii_setmask(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
 			      SDCC_HC_REG_DDR_CONFIG);
 	}
-- 
2.47.3