[PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones

[g.liakhovetski@gmx.de (Guennadi Liakhovetski)]

On Wed, 4 Nov 2009, Eric Miao wrote:

> Hi Antonio,
> 
> Patch looks generally OK except for the MFP/GPIO usage, check my
> comments below, thanks.
> 
> > +/* camera */
> > +static int a780_pxacamera_init(struct device *dev)
> > +{
> > + ? ? ? int err;
> > +
> > + ? ? ? /*
> > + ? ? ? ?* GPIO50_GPIO is CAM_EN: active low
> > + ? ? ? ?* GPIO19_GPIO is CAM_RST: active high
> > + ? ? ? ?*/
> > + ? ? ? err = gpio_request(MFP_PIN_GPIO50, "nCAM_EN");
> 
> Mmm... MFP != GPIO, so this probably should be written simply as:
> 
> #define GPIO_nCAM_EN	(50)

...but without parenthesis, please:

#define GPIO_nCAM_EN	50

same everywhere below

> or (which tends to be more accurate but not necessary)
> 
> #define GPIO_nCAM_EN	mfp_to_gpio(MFP_PIN_GPIO50)
> 
> If platform matters, I suggest something like:
> 
> #define GPIO_A780_nCAM_EN	(50)
> #define GPIO_A910_nCAM_EN	(<something else>)
> 
> ...
> 
> 	err = gpio_request(GPIO_nCAM_EN, "nCAM_EN");
> 
> > + ? ? ? if (err) {
> > + ? ? ? ? ? ? ? pr_err("%s: Failed to request nCAM_EN\n", __func__);
> > + ? ? ? ? ? ? ? goto fail;
> > + ? ? ? }
> > +
> > + ? ? ? err = gpio_request(MFP_PIN_GPIO19, "CAM_RST");
> 
> ditto
> 
> > + ? ? ? if (err) {
> > + ? ? ? ? ? ? ? pr_err("%s: Failed to request CAM_RST\n", __func__);
> > + ? ? ? ? ? ? ? goto fail_gpio_cam_rst;
> > + ? ? ? }
> > +
> > + ? ? ? gpio_direction_output(MFP_PIN_GPIO50, 0);
> > + ? ? ? gpio_direction_output(MFP_PIN_GPIO19, 1);
> > +
> > + ? ? ? return 0;
> > +
> > +fail_gpio_cam_rst:
> > + ? ? ? gpio_free(MFP_PIN_GPIO50);
> > +fail:
> > + ? ? ? return err;
> > +}
> > +
> > +static int a780_pxacamera_power(struct device *dev, int on)
> > +{
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO50, on ? 0 : 1);
> 
> 	gpio_set_value(GPIO_nCAM_EN, on ? 0 : 1);

IMHO better yet

	gpio_set_value(GPIO_nCAM_EN, !on);

Also throughout the patch below.

I'm still to look at it miself and maybe provide a couple more comments, 
if any.

Thanks
Guennadi

> 
> > +
> > +#if 0
> > + ? ? ? /*
> > + ? ? ? ?* This is reported to resolve the "vertical line in view finder"
> > + ? ? ? ?* issue (LIBff11930), in the original source code released by
> > + ? ? ? ?* Motorola, but we never experienced the problem, so we don't use
> > + ? ? ? ?* this for now.
> > + ? ? ? ?*
> > + ? ? ? ?* AP Kernel camera driver: set TC_MM_EN to low when camera is running
> > + ? ? ? ?* and TC_MM_EN to high when camera stops.
> > + ? ? ? ?*
> > + ? ? ? ?* BP Software: if TC_MM_EN is low, BP do not shut off 26M clock, but
> > + ? ? ? ?* BP can sleep itself.
> > + ? ? ? ?*/
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO99, on ? 0 : 1);
> > +#endif
> 
> This is a little bit confusing - can we remove this for this stage?
> 
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +static int a780_pxacamera_reset(struct device *dev)
> > +{
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO19, 0);
> > + ? ? ? msleep(10);
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO19, 1);
> 
> better to define something like above:
> 
> #define GPIO_CAM_RESET	(19)
> 
> ...
> 
> 	gpio_set_value(GPIO_CAM_RESET, ...);
> 
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +struct pxacamera_platform_data a780_pxacamera_platform_data = {
> > + ? ? ? .init ? = a780_pxacamera_init,
> > + ? ? ? .flags ?= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
> > + ? ? ? ? ? ? ? PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
> > + ? ? ? .mclk_10khz = 5000,
> > +};
> > +
> > +static struct i2c_board_info a780_camera_i2c_board_info = {
> > + ? ? ? I2C_BOARD_INFO("mt9m111", 0x5d),
> > +};
> > +
> > +static struct soc_camera_link a780_iclink = {
> > + ? ? ? .bus_id ? ? ? ? = 0,
> > + ? ? ? .flags ? ? ? ? ?= SOCAM_SENSOR_INVERT_PCLK,
> > + ? ? ? .i2c_adapter_id = 0,
> > + ? ? ? .board_info ? ? = &a780_camera_i2c_board_info,
> > + ? ? ? .module_name ? ?= "mt9m111",
> > + ? ? ? .power ? ? ? ? ?= a780_pxacamera_power,
> > + ? ? ? .reset ? ? ? ? ?= a780_pxacamera_reset,
> > +};
> > +
> > +static struct platform_device a780_camera = {
> > + ? ? ? .name ? = "soc-camera-pdrv",
> > + ? ? ? .id ? ? = 0,
> > + ? ? ? .dev ? ?= {
> > + ? ? ? ? ? ? ? .platform_data = &a780_iclink,
> > + ? ? ? },
> > +};
> > +
> > ?static struct platform_device *a780_devices[] __initdata = {
> > ? ? ? ?&a780_gpio_keys,
> > + ? ? ? &a780_camera,
> > ?};
> >
> > ?static void __init a780_init(void)
> > @@ -699,6 +797,8 @@ static void __init a780_init(void)
> >
> > ? ? ? ?pxa_set_keypad_info(&a780_keypad_platform_data);
> >
> > + ? ? ? pxa_set_camera_info(&a780_pxacamera_platform_data);
> > +
> > ? ? ? ?platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
> > ? ? ? ?platform_add_devices(ARRAY_AND_SIZE(a780_devices));
> > ?}
> > @@ -864,8 +964,84 @@ static struct platform_device a910_gpio_keys = {
> > ? ? ? ?},
> > ?};
> >
> > +/* camera */
> > +static int a910_pxacamera_init(struct device *dev)
> > +{
> > + ? ? ? int err;
> > +
> > + ? ? ? /*
> > + ? ? ? ?* GPIO50_GPIO is CAM_EN: active low
> > + ? ? ? ?* GPIO28_GPIO is CAM_RST: active high
> > + ? ? ? ?*/
> > + ? ? ? err = gpio_request(MFP_PIN_GPIO50, "nCAM_EN");
> > + ? ? ? if (err) {
> > + ? ? ? ? ? ? ? pr_err("%s: Failed to request nCAM_EN\n", __func__);
> > + ? ? ? ? ? ? ? goto fail;
> > + ? ? ? }
> > +
> > + ? ? ? err = gpio_request(MFP_PIN_GPIO28, "CAM_RST");
> > + ? ? ? if (err) {
> > + ? ? ? ? ? ? ? pr_err("%s: Failed to request CAM_RST\n", __func__);
> > + ? ? ? ? ? ? ? goto fail_gpio_cam_rst;
> > + ? ? ? }
> > +
> > + ? ? ? gpio_direction_output(MFP_PIN_GPIO50, 0);
> > + ? ? ? gpio_direction_output(MFP_PIN_GPIO28, 1);
> > +
> > + ? ? ? return 0;
> > +
> > +fail_gpio_cam_rst:
> > + ? ? ? gpio_free(MFP_PIN_GPIO50);
> > +fail:
> > + ? ? ? return err;
> > +}
> > +
> > +static int a910_pxacamera_power(struct device *dev, int on)
> > +{
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO50, on ? 0 : 1);
> > + ? ? ? return 0;
> > +}
> > +
> > +static int a910_pxacamera_reset(struct device *dev)
> > +{
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO28, 0);
> > + ? ? ? msleep(10);
> > + ? ? ? gpio_set_value(MFP_PIN_GPIO28, 1);
> > +
> > + ? ? ? return 0;
> > +}
> > +
> > +struct pxacamera_platform_data a910_pxacamera_platform_data = {
> > + ? ? ? .init ? = a910_pxacamera_init,
> > + ? ? ? .flags ?= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
> > + ? ? ? ? ? ? ? PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
> > + ? ? ? .mclk_10khz = 5000,
> > +};
> > +
> > +static struct i2c_board_info a910_camera_i2c_board_info = {
> > + ? ? ? I2C_BOARD_INFO("mt9m111", 0x5d),
> > +};
> > +
> > +static struct soc_camera_link a910_iclink = {
> > + ? ? ? .bus_id ? ? ? ? = 0,
> > + ? ? ? .i2c_adapter_id = 0,
> > + ? ? ? .board_info ? ? = &a910_camera_i2c_board_info,
> > + ? ? ? .module_name ? ?= "mt9m111",
> > + ? ? ? .power ? ? ? ? ?= a910_pxacamera_power,
> > + ? ? ? .reset ? ? ? ? ?= a910_pxacamera_reset,
> > +};
> > +
> > +static struct platform_device a910_camera = {
> > + ? ? ? .name ? = "soc-camera-pdrv",
> > + ? ? ? .id ? ? = 0,
> > + ? ? ? .dev ? ?= {
> > + ? ? ? ? ? ? ? .platform_data = &a910_iclink,
> > + ? ? ? },
> > +};
> > +
> > ?static struct platform_device *a910_devices[] __initdata = {
> > ? ? ? ?&a910_gpio_keys,
> > + ? ? ? &a910_camera,
> > ?};
> >
> > ?static void __init a910_init(void)
> > @@ -880,6 +1056,8 @@ static void __init a910_init(void)
> >
> > ? ? ? ?pxa_set_keypad_info(&a910_keypad_platform_data);
> >
> > + ? ? ? pxa_set_camera_info(&a910_pxacamera_platform_data);
> > +
> > ? ? ? ?platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
> > ? ? ? ?platform_add_devices(ARRAY_AND_SIZE(a910_devices));
> > ?}
> > --
> > 1.6.5.2
> >
> >
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/