Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: g.liakhovetski@gmx.de (Guennadi Liakhovetski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2 v3] V4L: atmel-isi: add code to enable/disable ISI_MCK clock
Date: Thu, 5 Jan 2012 17:55:17 +0100 (CET)	[thread overview]
Message-ID: <Pine.LNX.4.64.1201051752220.23644@axis700.grange> (raw)
In-Reply-To: <CAOesGMiWH--=_fu1ufztb6jZLTDO8_EboDd+hEd=TN-AnRJ3Yw@mail.gmail.com>

From: Josh Wu <josh.wu@atmel.com>

This patch
- add ISI_MCK clock enable/disable code.
- change field name in isi_platform_data structure

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[g.liakhovetski at gmx.de: fix label names]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---

Arnd, please, pull this patch via your tree to avoid having to wait for 
the V4L tree, Mauro has acked it.

 drivers/media/video/atmel-isi.c |   31 +++++++++++++++++++++++++++++--
 include/media/atmel-isi.h       |    4 +++-
 2 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
index b25bd7b..9fe4519 100644
--- a/drivers/media/video/atmel-isi.c
+++ b/drivers/media/video/atmel-isi.c
@@ -90,7 +90,10 @@ struct atmel_isi {
 	struct isi_dma_desc		dma_desc[MAX_BUFFER_NUM];
 
 	struct completion		complete;
+	/* ISI peripherial clock */
 	struct clk			*pclk;
+	/* ISI_MCK, feed to camera sensor to generate pixel clock */
+	struct clk			*mck;
 	unsigned int			irq;
 
 	struct isi_platform_data	*pdata;
@@ -766,6 +769,12 @@ static int isi_camera_add_device(struct soc_camera_device *icd)
 	if (ret)
 		return ret;
 
+	ret = clk_enable(isi->mck);
+	if (ret) {
+		clk_disable(isi->pclk);
+		return ret;
+	}
+
 	isi->icd = icd;
 	dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
 		 icd->devnum);
@@ -779,6 +788,7 @@ static void isi_camera_remove_device(struct soc_camera_device *icd)
 
 	BUG_ON(icd != isi->icd);
 
+	clk_disable(isi->mck);
 	clk_disable(isi->pclk);
 	isi->icd = NULL;
 
@@ -874,7 +884,7 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd)
 
 	if (isi->pdata->has_emb_sync)
 		cfg1 |= ISI_CFG1_EMB_SYNC;
-	if (isi->pdata->isi_full_mode)
+	if (isi->pdata->full_mode)
 		cfg1 |= ISI_CFG1_FULL_MODE;
 
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
@@ -912,6 +922,7 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev)
 			isi->fb_descriptors_phys);
 
 	iounmap(isi->regs);
+	clk_put(isi->mck);
 	clk_put(isi->pclk);
 	kfree(isi);
 
@@ -930,7 +941,7 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
 	struct isi_platform_data *pdata;
 
 	pdata = dev->platform_data;
-	if (!pdata || !pdata->data_width_flags) {
+	if (!pdata || !pdata->data_width_flags || !pdata->mck_hz) {
 		dev_err(&pdev->dev,
 			"No config available for Atmel ISI\n");
 		return -EINVAL;
@@ -959,6 +970,19 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&isi->video_buffer_list);
 	INIT_LIST_HEAD(&isi->dma_desc_head);
 
+	/* Get ISI_MCK, provided by programmable clock or external clock */
+	isi->mck = clk_get(dev, "isi_mck");
+	if (IS_ERR(isi->mck)) {
+		dev_err(dev, "Failed to get isi_mck\n");
+		ret = PTR_ERR(isi->mck);
+		goto err_clk_get;
+	}
+
+	/* Set ISI_MCK's frequency, it should be faster than pixel clock */
+	ret = clk_set_rate(isi->mck, pdata->mck_hz);
+	if (ret < 0)
+		goto err_set_mck_rate;
+
 	isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
 				sizeof(struct fbd) * MAX_BUFFER_NUM,
 				&isi->fb_descriptors_phys,
@@ -1034,6 +1058,9 @@ err_alloc_ctx:
 			isi->p_fb_descriptors,
 			isi->fb_descriptors_phys);
 err_alloc_descriptors:
+err_set_mck_rate:
+	clk_put(isi->mck);
+err_clk_get:
 	kfree(isi);
 err_alloc_isi:
 	clk_put(pclk);
diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
index 26cece5..6568230 100644
--- a/include/media/atmel-isi.h
+++ b/include/media/atmel-isi.h
@@ -110,10 +110,12 @@ struct isi_platform_data {
 	u8 hsync_act_low;
 	u8 vsync_act_low;
 	u8 pclk_act_falling;
-	u8 isi_full_mode;
+	u8 full_mode;
 	u32 data_width_flags;
 	/* Using for ISI_CFG1 */
 	u32 frate;
+	/* Using for ISI_MCK */
+	u32 mck_hz;
 };
 
 #endif /* __ATMEL_ISI_H__ */
-- 
1.7.2.5

  parent reply	other threads:[~2012-01-05 16:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-15 14:25 [GIT PULL] at91: devices and boards files update for 3.3 Nicolas Ferre
2011-12-16  7:06 ` Olof Johansson
2011-12-16 16:37   ` Nicolas Ferre
2011-12-16 21:03     ` Olof Johansson
2011-12-17 18:34       ` Guennadi Liakhovetski
2011-12-17 23:42         ` Olof Johansson
2011-12-18  0:08           ` Guennadi Liakhovetski
2011-12-20  4:32             ` Olof Johansson
2012-01-03 10:49               ` Nicolas Ferre
2012-01-03 10:59                 ` Guennadi Liakhovetski
2012-01-05 16:55               ` Guennadi Liakhovetski [this message]
2012-01-05 17:09                 ` [PATCH 1/2 v3] V4L: atmel-isi: add code to enable/disable ISI_MCK clock Russell King - ARM Linux
2012-01-05 17:15                   ` Nicolas Ferre
2012-01-05 17:21                     ` Guennadi Liakhovetski
2012-01-06  5:49                       ` Wu, Josh
     [not found] ` <4F02E1B9.30009@atmel.com>
2012-01-03 21:39   ` [GIT PULL v2] at91: devices and boards files update for 3.3 Arnd Bergmann
2012-01-04  9:20     ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.64.1201051752220.23644@axis700.grange \
    --to=g.liakhovetski@gmx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox