From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Chen-Yu Tsai <wens@kernel.org>, linux-sunxi@lists.linux.dev
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Simona Vetter <simona@ffwll.ch>,
Samuel Holland <samuel@sholland.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Yang Siyuan <hsyysy@163.com>
Subject: Re: [PATCH RESEND] drm/sun4i: report coverage pixel blending for alpha-capable planes
Date: Tue, 17 Nov 2026 17:35:40 +0100 [thread overview]
Message-ID: <VyjYt3XHQ3e42-zx5UUDfg@gmail.com> (raw)
In-Reply-To: <20261117091932.12063-1-hsyysy@163.com>
Dne torek, 17. november 2026 ob 10:19:32 Srednjeevropski standardni čas je Yang Siyuan napisal(a):
> Linux 7.3 added validate_blend_mode_for_alpha_formats(), which warns once
> per plane that exposes a pixel format with an alpha channel but has no
> blend mode property:
>
> sun4i-drm display-engine: [drm] [PLANE:35:plane-0] pixel format with
> alpha exposed but blend mode not setup. Please fix.
>
> The mixer blends a layer using its own alpha channel: ALPHA_MODE is set
> to PIXEL when plane alpha is opaque and to COMBINED otherwise, while
> BLEND_PREMULTIPLY keeps its reset value. That is straight alpha, i.e. the
> DRM "coverage" blending equation.
>
> Advertise exactly DRM_MODE_BLEND_COVERAGE on every layer that can expose
> an alpha format (UI always, VI on DE3 and later). This matches the
> existing register programming, keeps userspace behaviour unchanged and
> satisfies the new validation. Premultiplied blending would require
> driving BLEND_PREMULTIPLY and is left as a follow-up.
The subject says drm/sun4i, but the DE1 backend planes (sun4i_layer.c)
also expose ARGB8888/ARGB4444/ARGB1555 without a blend mode property, so
A10/A20/A31/A33 still trigger the warning. Either handle them in a separate
patch or say in the commit message that this one only covers the DE2+
mixer.
>
> Fixes: 860e748bddcc ("drm: ensure blend mode supported if pixel format with alpha exposed")
This is incorrect. That patch only added general check. Drop the tag.
> Signed-off-by: Yang Siyuan <hsyysy@163.com>
> ---
> drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 13 +++++++++++++
> drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 14 ++++++++++++++
> 2 files changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> index 7d894e1eb..ef059ac47 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> @@ -283,6 +283,19 @@ struct sun8i_layer *sun8i_ui_layer_init_one(struct drm_device *drm,
> return ERR_PTR(ret);
> }
>
> + /*
> + * The mixer blends the layer using its own alpha channel with the
> + * pixels not premultiplied (BLEND_PREMULTIPLY keeps its reset value),
> + * which is the DRM "coverage" equation. Report it so that the blend
> + * mode validation in drm_mode_config_validate() is satisfied.
> + */
Above comment doesn't add much value.
> + ret = drm_plane_create_blend_mode_property(&layer->plane,
> + BIT(DRM_MODE_BLEND_COVERAGE));
> + if (ret) {
> + dev_err(drm->dev, "Couldn't add blend mode property\n");
> + return ERR_PTR(ret);
> + }
> +
> ret = drm_plane_create_zpos_property(&layer->plane, index,
> 0, plane_cnt - 1);
> if (ret) {
> diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> index 92dd5a97f..b6771576b 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> @@ -470,6 +470,20 @@ struct sun8i_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
> }
> }
>
> + /*
> + * Only DE3 and later expose pixel formats with an alpha channel, and
> + * the mixer blends them with straight alpha (coverage), same as the UI
> + * layer.
> + */
And neither this.
Best regards,
Jernej
> + if (layer->cfg->de_type >= SUN8I_MIXER_DE3) {
> + ret = drm_plane_create_blend_mode_property(&layer->plane,
> + BIT(DRM_MODE_BLEND_COVERAGE));
> + if (ret) {
> + dev_err(drm->dev, "Couldn't add blend mode property\n");
> + return ERR_PTR(ret);
> + }
> + }
> +
> ret = drm_plane_create_zpos_property(&layer->plane, index,
> 0, plane_cnt - 1);
> if (ret) {
> base-commit: 091b06388b117fefdcb63336ac09956a4914b961
>
prev parent reply other threads:[~2026-11-17 16:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 9:19 [PATCH RESEND] drm/sun4i: report coverage pixel blending for alpha-capable planes Yang Siyuan
2026-11-17 16:35 ` Jernej Škrabec [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VyjYt3XHQ3e42-zx5UUDfg@gmail.com \
--to=jernej.skrabec@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hsyysy@163.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=samuel@sholland.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox