From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: William Breathitt Gray <william.gray@linaro.org>
Cc: linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, stable@vger.kernel.org,
stable@kernel.org
Subject: Re: [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
Date: Tue, 18 Oct 2022 10:13:51 +0200 [thread overview]
Message-ID: <Y05gPzkIciwVuUdB@kb-xps> (raw)
In-Reply-To: <20221017225404.67127-1-william.gray@linaro.org>
On Mon, Oct 17, 2022 at 06:54:04PM -0400, William Breathitt Gray wrote:
> The signal_read(), action_read(), and action_write() callbacks have been
> assuming Signal0 is requested without checking. This results in requests
> for Signal1 returning data for Signal0. This patch fixes these
> oversights by properly checking for the Signal's id in the respective
> callbacks and handling accordingly based on the particular Signal
> requested. The trig_inverted member of the mchp_tc_data is removed as
> superfluous.
>
> Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
> Cc: stable@kernel.org
> Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>
> Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Looks ok to me, thanks.
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> ---
> drivers/counter/microchip-tcb-capture.c | 57 ++++++++++++++++---------
> 1 file changed, 38 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
> index f9dee15d9777..438f82b07a03 100644
> --- a/drivers/counter/microchip-tcb-capture.c
> +++ b/drivers/counter/microchip-tcb-capture.c
> @@ -28,7 +28,6 @@ struct mchp_tc_data {
> int qdec_mode;
> int num_channels;
> int channel[2];
> - bool trig_inverted;
> };
>
> static const enum counter_function mchp_tc_count_functions[] = {
> @@ -153,7 +152,7 @@ static int mchp_tc_count_signal_read(struct counter_device *counter,
>
> regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], SR), &sr);
>
> - if (priv->trig_inverted)
> + if (signal->id == 1)
> sigstatus = (sr & ATMEL_TC_MTIOB);
> else
> sigstatus = (sr & ATMEL_TC_MTIOA);
> @@ -169,26 +168,46 @@ static int mchp_tc_count_action_read(struct counter_device *counter,
> enum counter_synapse_action *action)
> {
> struct mchp_tc_data *const priv = counter_priv(counter);
> + const unsigned int cmr_reg = ATMEL_TC_REG(priv->channel[0], CMR);
> + enum counter_function function;
> + int err;
> u32 cmr;
>
> - regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
> + err = mchp_tc_count_function_read(counter, count, &function);
> + if (err)
> + return err;
>
> - switch (cmr & ATMEL_TC_ETRGEDG) {
> - default:
> - *action = COUNTER_SYNAPSE_ACTION_NONE;
> - break;
> - case ATMEL_TC_ETRGEDG_RISING:
> - *action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
> - break;
> - case ATMEL_TC_ETRGEDG_FALLING:
> - *action = COUNTER_SYNAPSE_ACTION_FALLING_EDGE;
> - break;
> - case ATMEL_TC_ETRGEDG_BOTH:
> + /* Default action mode */
> + *action = COUNTER_SYNAPSE_ACTION_NONE;
> +
> + switch (function) {
> + case COUNTER_FUNCTION_INCREASE:
> + /* TIOB signal is ignored */
> + if (synapse->signal->id == 1)
> + return 0;
> +
> + regmap_read(priv->regmap, cmr_reg, &cmr);
> +
> + switch (cmr & ATMEL_TC_ETRGEDG) {
> + case ATMEL_TC_ETRGEDG_RISING:
> + *action = COUNTER_SYNAPSE_ACTION_RISING_EDGE;
> + return 0;
> + case ATMEL_TC_ETRGEDG_FALLING:
> + *action = COUNTER_SYNAPSE_ACTION_FALLING_EDGE;
> + return 0;
> + case ATMEL_TC_ETRGEDG_BOTH:
> + *action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
> + return 0;
> + default:
> + return 0;
> + }
> + case COUNTER_FUNCTION_QUADRATURE_X4:
> *action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
> - break;
> + return 0;
> + default:
> + /* should never reach this path */
> + return -EINVAL;
> }
> -
> - return 0;
> }
>
> static int mchp_tc_count_action_write(struct counter_device *counter,
> @@ -199,8 +218,8 @@ static int mchp_tc_count_action_write(struct counter_device *counter,
> struct mchp_tc_data *const priv = counter_priv(counter);
> u32 edge = ATMEL_TC_ETRGEDG_NONE;
>
> - /* QDEC mode is rising edge only */
> - if (priv->qdec_mode)
> + /* QDEC mode is rising edge only; only TIOA handled in non-QDEC mode */
> + if (priv->qdec_mode || synapse->signal->id != 0)
> return -EINVAL;
>
> switch (action) {
> --
> 2.37.3
>
--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-18 8:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-17 22:54 [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse William Breathitt Gray
2022-10-18 8:13 ` Kamel Bouhara [this message]
2022-10-18 11:53 ` William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y05gPzkIciwVuUdB@kb-xps \
--to=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
--cc=stable@vger.kernel.org \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox