Re: [PATCH] clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146x

[Abel Vesa <abel.vesa@linaro.org>]

On 22-10-31 21:48:38, Marek Vasut wrote:
> The PLL146x is used to implement SYS_PLL3 on i.MX8MP and can be used
> to drive UARTn_ROOT clock. By setting the PLL3 to 320 MHz or 640 MHz,
> the PLL3 output can be divided down to supply UARTn_ROOT clock with
> precise 64 MHz, which divided down further by 16x oversampling factor
> used by the i.MX UART core yields 4 Mbdps baud base for the UART IP.
> This is useful e.g. for BCM bluetooth chips, which can operate up to
> 4 Mbdps.
> 
> Add 320 MHz and 640 MHz entries so the PLL can be configured accordingly.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Applied. Thanks.

> ---
> Cc: Abel Vesa <abel.vesa@nxp.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: linux-arm-kernel@lists.infradead.org
> To: linux-clk@vger.kernel.org
> ---
>  drivers/clk/imx/clk-pll14xx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
> index 1d0f79e9c3467..828336873a98f 100644
> --- a/drivers/clk/imx/clk-pll14xx.c
> +++ b/drivers/clk/imx/clk-pll14xx.c
> @@ -54,7 +54,9 @@ static const struct imx_pll14xx_rate_table imx_pll1416x_tbl[] = {
>  	PLL_1416X_RATE(800000000U,  200, 3, 1),
>  	PLL_1416X_RATE(750000000U,  250, 2, 2),
>  	PLL_1416X_RATE(700000000U,  350, 3, 2),
> +	PLL_1416X_RATE(640000000U,  320, 3, 2),
>  	PLL_1416X_RATE(600000000U,  300, 3, 2),
> +	PLL_1416X_RATE(320000000U,  160, 3, 2),
>  };
>  
>  static const struct imx_pll14xx_rate_table imx_pll1443x_tbl[] = {
> -- 
> 2.35.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel