linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Ricardo Koller <ricarkol@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>,
	Marc Zyngier <maz@kernel.org>, James Morse <james.morse@arm.com>,
	Alexandru Elisei <alexandru.elisei@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Shuah Khan <shuah@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	kvmarm@lists.linux.dev, linux-kselftest@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] KVM: selftests: Setup ucall after loading program into guest memory
Date: Thu, 8 Dec 2022 19:01:57 +0000	[thread overview]
Message-ID: <Y5I0paok+dvTtrkt@google.com> (raw)
In-Reply-To: <Y5IxNTKRnacfSsLt@google.com>

On Thu, Dec 08, 2022, Ricardo Koller wrote:
> On Thu, Dec 08, 2022 at 12:37:23AM +0000, Oliver Upton wrote:
> > On Thu, Dec 08, 2022 at 12:24:20AM +0000, Sean Christopherson wrote:
> > > > Even still, that's just a kludge to make ucalls work. We have other
> > > > MMIO devices (GIC distributor, for example) that work by chance since
> > > > nothing conflicts with the constant GPAs we've selected in the tests.
> > > > 
> > > > I'd rather we go down the route of having an address allocator for the
> > > > for both the VA and PA spaces to provide carveouts at runtime.
> > > 
> > > Aren't those two separate issues?  The PA, a.k.a. memslots space, can be solved
> > > by allocating a dedicated memslot, i.e. doesn't need a carve.  At worst, collisions
> > > will yield very explicit asserts, which IMO is better than whatever might go wrong
> > > with a carve out.
> > 
> > Perhaps the use of the term 'carveout' wasn't right here.
> > 
> > What I'm suggesting is we cannot rely on KVM memslots alone to act as an
> > allocator for the PA space. KVM can provide devices to the guest that
> > aren't represented as memslots. If we're trying to fix PA allocations
> > anyway, why not make it generic enough to suit the needs of things
> > beyond ucalls?
> 
> One extra bit of information: in arm, IO is any access to an address (within
> bounds) not backed by a memslot. Not the same as x86 where MMIO are writes to
> read-only memslots.  No idea what other arches do.

I don't think that's correct, doesn't this code turn write abort on a RO memslot
into an io_mem_abort()?  Specifically, the "(write_fault && !writable)" check will
match, and assuming none the the edge cases in the if-statement fire, KVM will
send the write down io_mem_abort().

	gfn = fault_ipa >> PAGE_SHIFT;
	memslot = gfn_to_memslot(vcpu->kvm, gfn);
	hva = gfn_to_hva_memslot_prot(memslot, gfn, &writable);
	write_fault = kvm_is_write_fault(vcpu);
	if (kvm_is_error_hva(hva) || (write_fault && !writable)) {
		/*
		 * The guest has put either its instructions or its page-tables
		 * somewhere it shouldn't have. Userspace won't be able to do
		 * anything about this (there's no syndrome for a start), so
		 * re-inject the abort back into the guest.
		 */
		if (is_iabt) {
			ret = -ENOEXEC;
			goto out;
		}

		if (kvm_vcpu_abt_iss1tw(vcpu)) {
			kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
			ret = 1;
			goto out_unlock;
		}

		/*
		 * Check for a cache maintenance operation. Since we
		 * ended-up here, we know it is outside of any memory
		 * slot. But we can't find out if that is for a device,
		 * or if the guest is just being stupid. The only thing
		 * we know for sure is that this range cannot be cached.
		 *
		 * So let's assume that the guest is just being
		 * cautious, and skip the instruction.
		 */
		if (kvm_is_error_hva(hva) && kvm_vcpu_dabt_is_cm(vcpu)) {
			kvm_incr_pc(vcpu);
			ret = 1;
			goto out_unlock;
		}

		/*
		 * The IPA is reported as [MAX:12], so we need to
		 * complement it with the bottom 12 bits from the
		 * faulting VA. This is always 12 bits, irrespective
		 * of the page size.
		 */
		fault_ipa |= kvm_vcpu_get_hfar(vcpu) & ((1 << 12) - 1);
		ret = io_mem_abort(vcpu, fault_ipa);
		goto out_unlock;
	}

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-12-08 19:03 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-07 21:48 [PATCH 0/4] KVM: selftests: Fixes for ucall pool + page_fault_test Oliver Upton
2022-12-07 21:48 ` [PATCH 1/4] KVM: selftests: Fix build due to ucall_uninit() removal Oliver Upton
2022-12-07 21:48 ` [PATCH 2/4] KVM: selftests: Setup ucall after loading program into guest memory Oliver Upton
2022-12-07 23:57   ` Sean Christopherson
2022-12-08  0:17     ` Oliver Upton
2022-12-08  0:24       ` Sean Christopherson
2022-12-08  0:37         ` Oliver Upton
2022-12-08 18:47           ` Ricardo Koller
2022-12-08 19:01             ` Sean Christopherson [this message]
2022-12-08 19:49               ` Ricardo Koller
2022-12-09  1:08                 ` Sean Christopherson
2022-12-07 21:48 ` [PATCH 3/4] KVM: arm64: selftests: Align VA space allocator with TTBR0 Oliver Upton
2022-12-08  0:18   ` Sean Christopherson
2022-12-08  0:27     ` Oliver Upton
2022-12-08  1:09       ` Sean Christopherson
2022-12-08 16:23         ` Andrew Jones
2022-12-07 21:48 ` [PATCH 4/4] KVM: selftests: Allocate ucall pool from MEM_REGION_DATA Oliver Upton
2022-12-07 23:44   ` Sean Christopherson
2022-12-07 23:56     ` Oliver Upton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y5I0paok+dvTtrkt@google.com \
    --to=seanjc@google.com \
    --cc=alexandru.elisei@arm.com \
    --cc=james.morse@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=pbonzini@redhat.com \
    --cc=ricarkol@google.com \
    --cc=shuah@kernel.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).