linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Patrice Chotard <patrice.chotard@foss.st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Liang He <windhl@126.com>, Wan Jiabing <wanjiabing@vivo.com>,
	Hugues Fruchet <hugues.fruchet@st.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] media: c8sectpfe: switch to using gpiod API
Date: Fri, 3 Feb 2023 15:13:48 -0800	[thread overview]
Message-ID: <Y92VLGLQJZ/UDRx1@google.com> (raw)

This switches the driver from using legacy gpio API and to the newer
gpiod API. Since ordinary gpiod APIs operate on logical and not
electrical levels, handling of the reset GPIO is adjusted accordingly.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../st/sti/c8sectpfe/c8sectpfe-core.c         | 31 ++++++++-----------
 .../st/sti/c8sectpfe/c8sectpfe-core.h         |  4 ++-
 2 files changed, 16 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
index c38b62d4f1ae..dd8141e0828d 100644
--- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
@@ -16,8 +16,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/dvb/dmx.h>
 #include <linux/dvb/frontend.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -812,30 +814,23 @@ static int c8sectpfe_probe(struct platform_device *pdev)
 		}
 		of_node_put(i2c_bus);
 
-		tsin->rst_gpio = of_get_named_gpio(child, "reset-gpios", 0);
-
-		ret = gpio_is_valid(tsin->rst_gpio);
-		if (!ret) {
-			dev_err(dev,
-				"reset gpio for tsin%d not valid (gpio=%d)\n",
-				tsin->tsin_id, tsin->rst_gpio);
-			ret = -EINVAL;
-			goto err_node_put;
-		}
-
-		ret = devm_gpio_request_one(dev, tsin->rst_gpio,
-					GPIOF_OUT_INIT_LOW, "NIM reset");
+		/* Acquire reset GPIO and activate it */
+		tsin->rst_gpio = devm_fwnode_gpiod_get(dev,
+						       of_fwnode_handle(child),
+						       "reset", GPIOD_OUT_HIGH,
+						       "NIM reset");
+		ret = PTR_ERR_OR_ZERO(tsin->rst_gpio);
 		if (ret && ret != -EBUSY) {
-			dev_err(dev, "Can't request tsin%d reset gpio\n"
-				, fei->channel_data[index]->tsin_id);
+			dev_err(dev, "Can't request tsin%d reset gpio\n",
+				fei->channel_data[index]->tsin_id);
 			goto err_node_put;
 		}
 
 		if (!ret) {
-			/* toggle reset lines */
-			gpio_direction_output(tsin->rst_gpio, 0);
+			/* wait for the chip to reset */
 			usleep_range(3500, 5000);
-			gpio_direction_output(tsin->rst_gpio, 1);
+			/* release the reset line */
+			gpiod_set_value_cansleep(tsin->rst_gpio, 0);
 			usleep_range(3000, 5000);
 		}
 
diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.h
index c9d6021904cd..bf377cc82225 100644
--- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.h
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.h
@@ -16,6 +16,8 @@
 
 #define C8SECTPFE_MAX_TSIN_CHAN 8
 
+struct gpio_desc;
+
 struct channel_info {
 
 	int tsin_id;
@@ -25,7 +27,7 @@ struct channel_info {
 	int i2c;
 	int dvb_card;
 
-	int rst_gpio;
+	struct gpio_desc *rst_gpio;
 
 	struct i2c_adapter  *i2c_adapter;
 	struct i2c_adapter  *tuner_i2c;
-- 
2.39.1.519.gcb327c4b5f-goog


-- 
Dmitry

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-02-03 23:15 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-03 23:13 Dmitry Torokhov [this message]
2023-03-10 16:52 ` [PATCH] media: c8sectpfe: switch to using gpiod API Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y92VLGLQJZ/UDRx1@google.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=hugues.fruchet@st.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=patrice.chotard@foss.st.com \
    --cc=wanjiabing@vivo.com \
    --cc=windhl@126.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).