linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jens Wiklander <jens.wiklander@linaro.org>
To: Etienne Carriere <etienne.carriere@linaro.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Marc Zyngier <maz@kernel.org>, Sumit Garg <sumit.garg@linaro.org>
Subject: Re: [PATCH v2 3/3] optee: add enable/disable/set_wake handlers to optee irqs
Date: Fri, 3 Feb 2023 11:38:57 +0100	[thread overview]
Message-ID: <Y9zkQTXLzOzYqtV+@jade> (raw)
In-Reply-To: <20230124105643.1737250-3-etienne.carriere@linaro.org>

On Tue, Jan 24, 2023 at 11:56:43AM +0100, Etienne Carriere wrote:
> Implements OP-TEE's It Notif PTA API to deactivate and activate an
> interrupt notifier and to configure the wakeup capability
> of that interrupt. These controls are useful for efficient power
> management of the device when an interrupt controller resources is
> hosted in OP-TEE world.
> 
> When OP-TEE does not implement the It Notif PTA, the related handlers
> simply return with success. If OP-TEE exposes the PTA services, they
> are invoked on enable, disable and set_wake irqchip operations.
> 
> Cc: Jens Wiklander <jens.wiklander@linaro.org>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Sumit Garg <sumit.garg@linaro.org>
> 
> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
> Changes since v1:
> - Patch added in v2 series for power-up/down and wakeup configuration
>   of the irq chip.
> ---
>  drivers/tee/optee/optee_private.h |   2 +
>  drivers/tee/optee/smc_abi.c       | 157 ++++++++++++++++++++++++++++++
>  2 files changed, 159 insertions(+)
> 
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index f467409e02e9..257bb505a1fb 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -166,6 +166,7 @@ struct optee_ops {
>   * @scan_bus_done	flag if device registation was already done.
>   * @scan_bus_wq		workqueue to scan optee bus and register optee drivers
>   * @scan_bus_work	workq to scan optee bus and register optee drivers
> + * @notif_it_pta_ctx    TEE context for invoking interrupt conif services

We already have "ctx" above, why do we need another TEE context?

Thanks,
Jens

>   */
>  struct optee {
>  	struct tee_device *supp_teedev;
> @@ -185,6 +186,7 @@ struct optee {
>  	bool   scan_bus_done;
>  	struct workqueue_struct *scan_bus_wq;
>  	struct work_struct scan_bus_work;
> +	struct tee_context *notif_it_pta_ctx;
>  };
>  
>  struct optee_session {
> diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> index 9f4fdd28f04a..95adf8c93c98 100644
> --- a/drivers/tee/optee/smc_abi.c
> +++ b/drivers/tee/optee/smc_abi.c
> @@ -52,6 +52,43 @@
>   */
>  #define OPTEE_MIN_STATIC_POOL_ALIGN    9 /* 512 bytes aligned */
>  
> +/*
> + * Interrupt notification can be configured using Notif-IT PTA services.
> + * Below are the PTA UUID and its API commands.
> + */
> +#define PTA_IT_NOTIF_UUID \
> +	UUID_INIT(0x4461e5c7, 0xb523, 0x4b73, 0xac, 0xed, 0x75, 0xad, \
> +		  0x2b, 0x9b, 0x59, 0xa1)
> +
> +/*
> + * PTA_IT_NOTIF_ACTIVATE_DETECTION - Enable a interrupt notification
> + *
> + * [in]  params[0].value.a     Interrupt ID
> + */
> +#define PTA_IT_NOTIF_ACTIVATE_DETECTION		0
> +
> +/*
> + * PTA_IT_NOTIF_DEACTIVATE_DETECTION - Disable a interrupt notification
> + *
> + * [in]  params[0].value.a     Interrupt ID
> + */
> +#define PTA_IT_NOTIF_DEACTIVATE_DETECTION	1
> +
> +/*
> + * PTA_IT_NOTIF_ENABLE_WAKEUP_SOURCE - Enable an interrupt wakeup source
> + *
> + * [in]  params[0].value.a     Interrupt ID
> + */
> +#define PTA_IT_NOTIF_ENABLE_WAKEUP_SOURCE	2
> +
> +/*
> + * PTA_IT_NOTIF_ENABLE_WAKEUP_SOURCE - Disable an interrupt wakeup source
> + *
> + * [in]  params[0].value.a     Interrupt ID
> + */
> +#define PTA_IT_NOTIF_DISABLE_WAKEUP_SOURCE	3
> +
> +
>  /*
>   * 1. Convert between struct tee_param and struct optee_msg_param
>   *
> @@ -977,6 +1014,92 @@ static int optee_smc_stop_async_notif(struct tee_context *ctx)
>   * 5. Asynchronous notification
>   */
>  
> +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> +{
> +	return ver->impl_id == TEE_IMPL_ID_OPTEE;
> +}
> +
> +static void init_optee_pta_context(struct optee *optee)
> +{
> +	struct tee_context *ctx = NULL;
> +	const uuid_t pta_uuid = PTA_IT_NOTIF_UUID;
> +	struct tee_ioctl_open_session_arg sess_arg;
> +	int ret;
> +
> +	ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> +	if (IS_ERR(ctx))
> +		return;
> +
> +	memset(&sess_arg, 0, sizeof(sess_arg));
> +	export_uuid(sess_arg.uuid, &pta_uuid);
> +	sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
> +
> +	ret = tee_client_open_session(ctx, &sess_arg, NULL);
> +	if ((ret < 0) || (sess_arg.ret != 0)) {
> +		pr_err("Can't open IT_NOTIF PTA session: %#x\n", sess_arg.ret);
> +		tee_client_close_context(ctx);
> +		return;
> +	}
> +
> +	tee_client_close_session(ctx, sess_arg.session);
> +
> +	optee->notif_it_pta_ctx = ctx;
> +}
> +
> +static void release_optee_pta_context(struct optee *optee)
> +{
> +	if (optee->notif_it_pta_ctx) {
> +		tee_client_close_context(optee->notif_it_pta_ctx);
> +		optee->notif_it_pta_ctx = NULL;
> +	}
> +}
> +
> +static int invoke_optee_pta(struct optee *optee, unsigned int command,
> +			    unsigned int irq_id)
> +{
> +	const uuid_t pta_uuid = PTA_IT_NOTIF_UUID;
> +	struct tee_ioctl_open_session_arg sess_arg;
> +	struct tee_ioctl_invoke_arg inv_arg;
> +	struct tee_param param[1];
> +	int ret;
> +
> +	if (!optee->notif_it_pta_ctx)
> +		return -ENOENT;
> +
> +	memset(&sess_arg, 0, sizeof(sess_arg));
> +	export_uuid(sess_arg.uuid, &pta_uuid);
> +	sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
> +
> +	ret = tee_client_open_session(optee->notif_it_pta_ctx, &sess_arg, NULL);
> +	if ((ret < 0) || (sess_arg.ret != 0)) {
> +		pr_err("tee_client_open_session failed, err: %#x\n", sess_arg.ret);
> +		if (!ret)
> +			ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	memset(&inv_arg, 0, sizeof(inv_arg));
> +	inv_arg.session = sess_arg.session;
> +	inv_arg.func = command;
> +	inv_arg.num_params = 1;
> +
> +	memset(&param, 0, sizeof(param));
> +	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
> +	param[0].u.value.a = irq_id;
> +
> +	ret = tee_client_invoke_func(optee->notif_it_pta_ctx, &inv_arg, param);
> +	if ((ret < 0) || (inv_arg.ret != 0)) {
> +		pr_err("tee_client_invoke_func failed, ret: %d, err: %#x\n",
> +		       ret, inv_arg.ret);
> +		if (!ret)
> +			ret = -EINVAL;
> +	}
> +
> +	tee_client_close_session(optee->notif_it_pta_ctx, sess_arg.session);
> +
> +	return ret;
> +}
> +
>  static void config_notif_it(optee_invoke_fn *invoke_fn, u32 it_value,
>  			    u32 op_mask, u32 val_mask)
>  {
> @@ -1001,10 +1124,40 @@ static void optee_it_irq_unmask(struct irq_data *d)
>  	config_notif_it(optee->smc.invoke_fn, d->hwirq, OPTEE_SMC_NOTIF_CONFIG_MASK, 0);
>  }
>  
> +static void optee_it_irq_disable(struct irq_data *d)
> +{
> +	struct optee *optee = d->domain->host_data;
> +
> +	(void)invoke_optee_pta(optee, PTA_IT_NOTIF_DEACTIVATE_DETECTION, d->hwirq);
> +}
> +
> +static void optee_it_irq_enable(struct irq_data *d)
> +{
> +	struct optee *optee = d->domain->host_data;
> +
> +	(void)invoke_optee_pta(optee, PTA_IT_NOTIF_ACTIVATE_DETECTION, d->hwirq);
> +}
> +
> +static int optee_it_irq_set_wake(struct irq_data *d, unsigned int on)
> +{
> +	struct optee *optee = d->domain->host_data;
> +	u32 command;
> +
> +	if (on)
> +		command = PTA_IT_NOTIF_ENABLE_WAKEUP_SOURCE;
> +	else
> +		command = PTA_IT_NOTIF_DISABLE_WAKEUP_SOURCE;
> +
> +	return invoke_optee_pta(optee, command, d->hwirq);
> +}
> +
>  static struct irq_chip optee_it_irq_chip = {
>  	.name = "optee-it",
>  	.irq_mask = optee_it_irq_mask,
>  	.irq_unmask = optee_it_irq_unmask,
> +	.irq_disable = optee_it_irq_disable,
> +	.irq_enable = optee_it_irq_enable,
> +	.irq_set_wake = optee_it_irq_set_wake,
>  };
>  
>  static int optee_it_alloc(struct irq_domain *d, unsigned int virq,
> @@ -1463,6 +1616,7 @@ static int optee_smc_remove(struct platform_device *pdev)
>  		optee_disable_shm_cache(optee);
>  
>  	optee_smc_notif_uninit_irq(optee);
> +	release_optee_pta_context(optee);
>  
>  	optee_remove_common(optee);
>  
> @@ -1650,6 +1804,8 @@ static int optee_probe(struct platform_device *pdev)
>  				irq_dispose_mapping(irq);
>  				goto err_notif_uninit;
>  			}
> +
> +			init_optee_pta_context(optee);
>  		}
>  
>  		enable_async_notif(optee->smc.invoke_fn);
> @@ -1687,6 +1843,7 @@ static int optee_probe(struct platform_device *pdev)
>  		optee_disable_shm_cache(optee);
>  	optee_smc_notif_uninit_irq(optee);
>  	optee_unregister_devices();
> +	release_optee_pta_context(optee);
>  err_notif_uninit:
>  	optee_notif_uninit(optee);
>  err_close_ctx:
> -- 
> 2.25.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-02-03 10:40 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-24 10:56 [PATCH v2 1/3] dt-bindings: arm: optee: add interrupt controller properties Etienne Carriere
2023-01-24 10:56 ` [PATCH v2 2/3] optee: multiplex tee interrupt events on optee async notif irq Etienne Carriere
2023-02-02 11:15   ` Sumit Garg
2023-02-03 11:27     ` Etienne Carriere
2023-02-03 10:26   ` Jens Wiklander
2023-01-24 10:56 ` [PATCH v2 3/3] optee: add enable/disable/set_wake handlers to optee irqs Etienne Carriere
2023-02-03 10:38   ` Jens Wiklander [this message]
2023-02-03 16:55     ` Etienne Carriere
2023-01-25 20:22 ` [PATCH v2 1/3] dt-bindings: arm: optee: add interrupt controller properties Rob Herring
2023-01-25 21:00   ` Etienne Carriere
2023-01-26 14:00     ` Rob Herring
2023-01-26 14:40       ` Etienne Carriere
2023-01-26 14:53 ` Sudeep Holla
2023-01-26 15:51   ` Etienne Carriere

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y9zkQTXLzOzYqtV+@jade \
    --to=jens.wiklander@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=etienne.carriere@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=sumit.garg@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).