linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: "Marek Behún" <kabel@kernel.org>
Cc: stable@vger.kernel.org,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	linux-arm-kernel@lists.infradead.org,
	"Uwe Kleine-König" <uwe@kleine-koenig.org>,
	"Rui Salvaterra" <rsalvaterra@gmail.com>
Subject: Re: [PATCH mvebu-dt] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
Date: Sun, 21 Feb 2021 21:52:03 +0100	[thread overview]
Message-ID: <YDLH8z9R7EQHFEkU@lunn.ch> (raw)
In-Reply-To: <20210220231144.32325-1-kabel@kernel.org>

On Sun, Feb 21, 2021 at 12:11:44AM +0100, Marek Behún wrote:
> Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
> of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.
> 
> Without this the pin is by default in LED[2] mode, and the Marvell PHY
> driver configures LED[2] into "On - Link, Blink - Activity" mode.
> 
> This fixes the issue where the pca9538 GPIO/interrupt controller (which
> can't mask interrupts in HW) received too many interrupts and after a
> time started ignoring the interrupt with error message:
>   IRQ 71: nobody cared
> 
> There is a work in progress to have the Marvell PHY driver support
> parsing PHY LED nodes from OF and registering the LEDs as Linux LED
> class devices. Once this is done the PHY driver can also automatically
> set the pin into INTn mode if it does not find LED[2] in OF.
> 
> Until then, though, we fix this via `marvell,reg-init` DT property.
> 
> Signed-off-by: Marek Behún <kabel@kernel.org>
> Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
> Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
> Cc: <stable@vger.kernel.org>

Hi Marek

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

> This patch fixes bug introduced with the commit that added Turris
> Omnia's DTS (26ca8b52d6e1), but will not apply cleanly because there is
> commit 8ee4a5f4f40d which changed node name and node compatible
> property and this commit did not go into stable.
> 
> So either commit 8ee4a5f4f40d has also to go into stable before this, or
> this patch has to be fixed a little in order to apply to 4.14+.

Once this has made it into Linus's tree, you can give GregKH a version
which will apply cleanly to 4.14.  Reference the upstream version so
they can be linked together.

     Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-02-21 20:53 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-20 23:11 [PATCH mvebu-dt] ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin Marek Behún
2021-02-21  0:10 ` Andrew Lunn
2021-02-21  0:47   ` Marek Behún
2021-02-21 21:18     ` Andrew Lunn
2021-02-21 22:40       ` Marek Behún
2021-02-21 19:58 ` Rui Salvaterra
2021-02-21 20:52 ` Andrew Lunn [this message]
2021-02-21 20:58   ` Marek Behún
2021-04-02 20:15 ` Gregory CLEMENT

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YDLH8z9R7EQHFEkU@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=gregory.clement@bootlin.com \
    --cc=kabel@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=rsalvaterra@gmail.com \
    --cc=stable@vger.kernel.org \
    --cc=uwe@kleine-koenig.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).