linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] mfd: stmpe: Revert "Constify static struct resource"
Date: Fri, 5 Mar 2021 12:18:32 +0200	[thread overview]
Message-ID: <YEIFeJQvyyYRYm+W@smile.fi.intel.com> (raw)
In-Reply-To: <20210304230709.3217-1-rikard.falkeborn@gmail.com>

On Fri, Mar 05, 2021 at 12:07:09AM +0100, Rikard Falkeborn wrote:
> In stmpe_devices_init(), the start and end field of these structs are
> modified, so they can not be const. Add a comment to those structs that
> lacked it to reduce the risk that this happens again.
> 
> This reverts commit 8d7b3a6dac4eae22c58b0853696cbd256966741b.

FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Fixes: 8d7b3a6dac4e ("mfd: stmpe: Constify static struct resource")
> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
> ---
> Changes
> V1-V2: Add comments to the structs that they are dynamically modified
>        Rewrite commit message.
> 
> V1: https://lore.kernel.org/lkml/20210302234710.74455-1-rikard.falkeborn@gmail.com/
> 
>  drivers/mfd/stmpe.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index 90f3292230c9..1dd39483e7c1 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
>   * GPIO (all variants)
>   */
>  
> -static const struct resource stmpe_gpio_resources[] = {
> +static struct resource stmpe_gpio_resources[] = {
>  	/* Start and end filled dynamically */
>  	{
>  		.flags	= IORESOURCE_IRQ,
> @@ -336,7 +336,8 @@ static const struct mfd_cell stmpe_gpio_cell_noirq = {
>   * Keypad (1601, 2401, 2403)
>   */
>  
> -static const struct resource stmpe_keypad_resources[] = {
> +static struct resource stmpe_keypad_resources[] = {
> +	/* Start and end filled dynamically */
>  	{
>  		.name	= "KEYPAD",
>  		.flags	= IORESOURCE_IRQ,
> @@ -357,7 +358,8 @@ static const struct mfd_cell stmpe_keypad_cell = {
>  /*
>   * PWM (1601, 2401, 2403)
>   */
> -static const struct resource stmpe_pwm_resources[] = {
> +static struct resource stmpe_pwm_resources[] = {
> +	/* Start and end filled dynamically */
>  	{
>  		.name	= "PWM0",
>  		.flags	= IORESOURCE_IRQ,
> @@ -445,7 +447,8 @@ static struct stmpe_variant_info stmpe801_noirq = {
>   * Touchscreen (STMPE811 or STMPE610)
>   */
>  
> -static const struct resource stmpe_ts_resources[] = {
> +static struct resource stmpe_ts_resources[] = {
> +	/* Start and end filled dynamically */
>  	{
>  		.name	= "TOUCH_DET",
>  		.flags	= IORESOURCE_IRQ,
> @@ -467,7 +470,8 @@ static const struct mfd_cell stmpe_ts_cell = {
>   * ADC (STMPE811)
>   */
>  
> -static const struct resource stmpe_adc_resources[] = {
> +static struct resource stmpe_adc_resources[] = {
> +	/* Start and end filled dynamically */
>  	{
>  		.name	= "STMPE_TEMP_SENS",
>  		.flags	= IORESOURCE_IRQ,
> -- 
> 2.30.1
> 

-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-03-05 10:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-04 23:07 [PATCH v2] mfd: stmpe: Revert "Constify static struct resource" Rikard Falkeborn
2021-03-05 10:18 ` Andy Shevchenko [this message]
2021-03-09 18:17 ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YEIFeJQvyyYRYm+W@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=alexandre.torgue@st.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=rikard.falkeborn@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).