linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: Re: [PATCH] clk: imx8mq: remove SYS PLL 1/2 clock gates
Date: Mon, 14 Jun 2021 16:33:33 +0300	[thread overview]
Message-ID: <YMdarftSzP072hBF@ryzen.lan> (raw)
In-Reply-To: <20210528180135.1640876-1-l.stach@pengutronix.de>

On 21-05-28 20:01:35, Lucas Stach wrote:
> Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
> the uSDHC module which is sporadically unable to enumerate devices after
> this change. Also it makes AMP clock management harder with no obvious
> benefit to Linux, so just revert the change.
> 
> Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Looks good to me.

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>

> ---
> Previously this was a more targeted change only reverting the problematic
> bit for uSDHC, but Jacky Bai expressed the desire to just revert the whole
> change, as it makes things harder for AMP use-cases.
> ---
>  drivers/clk/imx/clk-imx8mq.c             | 56 ++++++++----------------
>  include/dt-bindings/clock/imx8mq-clock.h | 19 --------
>  2 files changed, 18 insertions(+), 57 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
> index b08019e1faf9..c491bc9c61ce 100644
> --- a/drivers/clk/imx/clk-imx8mq.c
> +++ b/drivers/clk/imx/clk-imx8mq.c
> @@ -358,46 +358,26 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
>  	hws[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_hw_sscg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
>  
>  	/* SYS PLL1 fixed output */
> -	hws[IMX8MQ_SYS1_PLL_40M_CG] = imx_clk_hw_gate("sys1_pll_40m_cg", "sys1_pll_out", base + 0x30, 9);
> -	hws[IMX8MQ_SYS1_PLL_80M_CG] = imx_clk_hw_gate("sys1_pll_80m_cg", "sys1_pll_out", base + 0x30, 11);
> -	hws[IMX8MQ_SYS1_PLL_100M_CG] = imx_clk_hw_gate("sys1_pll_100m_cg", "sys1_pll_out", base + 0x30, 13);
> -	hws[IMX8MQ_SYS1_PLL_133M_CG] = imx_clk_hw_gate("sys1_pll_133m_cg", "sys1_pll_out", base + 0x30, 15);
> -	hws[IMX8MQ_SYS1_PLL_160M_CG] = imx_clk_hw_gate("sys1_pll_160m_cg", "sys1_pll_out", base + 0x30, 17);
> -	hws[IMX8MQ_SYS1_PLL_200M_CG] = imx_clk_hw_gate("sys1_pll_200m_cg", "sys1_pll_out", base + 0x30, 19);
> -	hws[IMX8MQ_SYS1_PLL_266M_CG] = imx_clk_hw_gate("sys1_pll_266m_cg", "sys1_pll_out", base + 0x30, 21);
> -	hws[IMX8MQ_SYS1_PLL_400M_CG] = imx_clk_hw_gate("sys1_pll_400m_cg", "sys1_pll_out", base + 0x30, 23);
> -	hws[IMX8MQ_SYS1_PLL_800M_CG] = imx_clk_hw_gate("sys1_pll_800m_cg", "sys1_pll_out", base + 0x30, 25);
> -
> -	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_40m_cg", 1, 20);
> -	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_80m_cg", 1, 10);
> -	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_100m_cg", 1, 8);
> -	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_133m_cg", 1, 6);
> -	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_160m_cg", 1, 5);
> -	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_200m_cg", 1, 4);
> -	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_266m_cg", 1, 3);
> -	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_400m_cg", 1, 2);
> -	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_800m_cg", 1, 1);
> +	hws[IMX8MQ_SYS1_PLL_40M] = imx_clk_hw_fixed_factor("sys1_pll_40m", "sys1_pll_out", 1, 20);
> +	hws[IMX8MQ_SYS1_PLL_80M] = imx_clk_hw_fixed_factor("sys1_pll_80m", "sys1_pll_out", 1, 10);
> +	hws[IMX8MQ_SYS1_PLL_100M] = imx_clk_hw_fixed_factor("sys1_pll_100m", "sys1_pll_out", 1, 8);
> +	hws[IMX8MQ_SYS1_PLL_133M] = imx_clk_hw_fixed_factor("sys1_pll_133m", "sys1_pll_out", 1, 6);
> +	hws[IMX8MQ_SYS1_PLL_160M] = imx_clk_hw_fixed_factor("sys1_pll_160m", "sys1_pll_out", 1, 5);
> +	hws[IMX8MQ_SYS1_PLL_200M] = imx_clk_hw_fixed_factor("sys1_pll_200m", "sys1_pll_out", 1, 4);
> +	hws[IMX8MQ_SYS1_PLL_266M] = imx_clk_hw_fixed_factor("sys1_pll_266m", "sys1_pll_out", 1, 3);
> +	hws[IMX8MQ_SYS1_PLL_400M] = imx_clk_hw_fixed_factor("sys1_pll_400m", "sys1_pll_out", 1, 2);
> +	hws[IMX8MQ_SYS1_PLL_800M] = imx_clk_hw_fixed_factor("sys1_pll_800m", "sys1_pll_out", 1, 1);
>  
>  	/* SYS PLL2 fixed output */
> -	hws[IMX8MQ_SYS2_PLL_50M_CG] = imx_clk_hw_gate("sys2_pll_50m_cg", "sys2_pll_out", base + 0x3c, 9);
> -	hws[IMX8MQ_SYS2_PLL_100M_CG] = imx_clk_hw_gate("sys2_pll_100m_cg", "sys2_pll_out", base + 0x3c, 11);
> -	hws[IMX8MQ_SYS2_PLL_125M_CG] = imx_clk_hw_gate("sys2_pll_125m_cg", "sys2_pll_out", base + 0x3c, 13);
> -	hws[IMX8MQ_SYS2_PLL_166M_CG] = imx_clk_hw_gate("sys2_pll_166m_cg", "sys2_pll_out", base + 0x3c, 15);
> -	hws[IMX8MQ_SYS2_PLL_200M_CG] = imx_clk_hw_gate("sys2_pll_200m_cg", "sys2_pll_out", base + 0x3c, 17);
> -	hws[IMX8MQ_SYS2_PLL_250M_CG] = imx_clk_hw_gate("sys2_pll_250m_cg", "sys2_pll_out", base + 0x3c, 19);
> -	hws[IMX8MQ_SYS2_PLL_333M_CG] = imx_clk_hw_gate("sys2_pll_333m_cg", "sys2_pll_out", base + 0x3c, 21);
> -	hws[IMX8MQ_SYS2_PLL_500M_CG] = imx_clk_hw_gate("sys2_pll_500m_cg", "sys2_pll_out", base + 0x3c, 23);
> -	hws[IMX8MQ_SYS2_PLL_1000M_CG] = imx_clk_hw_gate("sys2_pll_1000m_cg", "sys2_pll_out", base + 0x3c, 25);
> -
> -	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_50m_cg", 1, 20);
> -	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_100m_cg", 1, 10);
> -	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_125m_cg", 1, 8);
> -	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_166m_cg", 1, 6);
> -	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_200m_cg", 1, 5);
> -	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_250m_cg", 1, 4);
> -	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_333m_cg", 1, 3);
> -	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_500m_cg", 1, 2);
> -	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_1000m_cg", 1, 1);
> +	hws[IMX8MQ_SYS2_PLL_50M] = imx_clk_hw_fixed_factor("sys2_pll_50m", "sys2_pll_out", 1, 20);
> +	hws[IMX8MQ_SYS2_PLL_100M] = imx_clk_hw_fixed_factor("sys2_pll_100m", "sys2_pll_out", 1, 10);
> +	hws[IMX8MQ_SYS2_PLL_125M] = imx_clk_hw_fixed_factor("sys2_pll_125m", "sys2_pll_out", 1, 8);
> +	hws[IMX8MQ_SYS2_PLL_166M] = imx_clk_hw_fixed_factor("sys2_pll_166m", "sys2_pll_out", 1, 6);
> +	hws[IMX8MQ_SYS2_PLL_200M] = imx_clk_hw_fixed_factor("sys2_pll_200m", "sys2_pll_out", 1, 5);
> +	hws[IMX8MQ_SYS2_PLL_250M] = imx_clk_hw_fixed_factor("sys2_pll_250m", "sys2_pll_out", 1, 4);
> +	hws[IMX8MQ_SYS2_PLL_333M] = imx_clk_hw_fixed_factor("sys2_pll_333m", "sys2_pll_out", 1, 3);
> +	hws[IMX8MQ_SYS2_PLL_500M] = imx_clk_hw_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
> +	hws[IMX8MQ_SYS2_PLL_1000M] = imx_clk_hw_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
>  
>  	hws[IMX8MQ_CLK_MON_AUDIO_PLL1_DIV] = imx_clk_hw_divider("audio_pll1_out_monitor", "audio_pll1_bypass", base + 0x78, 0, 3);
>  	hws[IMX8MQ_CLK_MON_AUDIO_PLL2_DIV] = imx_clk_hw_divider("audio_pll2_out_monitor", "audio_pll2_bypass", base + 0x78, 4, 3);
> diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
> index 82e907ce7bdd..afa74d7ba100 100644
> --- a/include/dt-bindings/clock/imx8mq-clock.h
> +++ b/include/dt-bindings/clock/imx8mq-clock.h
> @@ -405,25 +405,6 @@
>  
>  #define IMX8MQ_VIDEO2_PLL1_REF_SEL		266
>  
> -#define IMX8MQ_SYS1_PLL_40M_CG			267
> -#define IMX8MQ_SYS1_PLL_80M_CG			268
> -#define IMX8MQ_SYS1_PLL_100M_CG			269
> -#define IMX8MQ_SYS1_PLL_133M_CG			270
> -#define IMX8MQ_SYS1_PLL_160M_CG			271
> -#define IMX8MQ_SYS1_PLL_200M_CG			272
> -#define IMX8MQ_SYS1_PLL_266M_CG			273
> -#define IMX8MQ_SYS1_PLL_400M_CG			274
> -#define IMX8MQ_SYS1_PLL_800M_CG			275
> -#define IMX8MQ_SYS2_PLL_50M_CG			276
> -#define IMX8MQ_SYS2_PLL_100M_CG			277
> -#define IMX8MQ_SYS2_PLL_125M_CG			278
> -#define IMX8MQ_SYS2_PLL_166M_CG			279
> -#define IMX8MQ_SYS2_PLL_200M_CG			280
> -#define IMX8MQ_SYS2_PLL_250M_CG			281
> -#define IMX8MQ_SYS2_PLL_333M_CG			282
> -#define IMX8MQ_SYS2_PLL_500M_CG			283
> -#define IMX8MQ_SYS2_PLL_1000M_CG		284
> -
>  #define IMX8MQ_CLK_GPU_CORE			285
>  #define IMX8MQ_CLK_GPU_SHADER			286
>  #define IMX8MQ_CLK_M4_CORE			287
> -- 
> 2.29.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      parent reply	other threads:[~2021-06-14 13:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-28 18:01 [PATCH] clk: imx8mq: remove SYS PLL 1/2 clock gates Lucas Stach
2021-06-02  7:46 ` Stephen Boyd
2021-06-14 13:29   ` Abel Vesa
2021-06-14 13:43     ` Lucas Stach
2021-06-14 14:04       ` Abel Vesa
2021-06-14 13:33 ` Abel Vesa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMdarftSzP072hBF@ryzen.lan \
    --to=abel.vesa@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=mturquette@baylibre.com \
    --cc=patchwork-lst@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).