[PATCH 7/7] i2c: stm32f7: : use proper DMAENGINE API for termination

Wolfram Sang
2021-06-23T10:01:57Z

dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-stm32f7.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 0138317ea600..9ea074a7ced6 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1567,7 +1567,7 @@ static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
if (!ret) {
dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
f7_msg->result = -ETIMEDOUT;
}

@@ -1637,7 +1637,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
/* Disable dma */
if (i2c_dev->use_dma) {
stm32f7_i2c_disable_dma_req(i2c_dev);
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
}

i2c_dev->master_mode = false;
@@ -1678,7 +1678,7 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
i2c_dev->msg->addr);
if (i2c_dev->use_dma)
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
ret = -ETIMEDOUT;
}

@@ -1727,7 +1727,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
if (!timeout) {
dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
if (i2c_dev->use_dma)
- dmaengine_terminate_all(dma->chan_using);
+ dmaengine_terminate_sync(dma->chan_using);
ret = -ETIMEDOUT;
goto pm_free;
}
--
2.30.2