intel-ixp42x-welltech-epbx100 no longer boot due to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

intel-ixp42x-welltech-epbx100 no longer boot due to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

[Corentin Labbe]

Hello

I am working on puting my ixp4xx board on kernelCI.
But it no longer boot since 4.14.
It only prints "Starting kernelUncompressing Linux... done, booting the kernel." then nothing.

I bisected the break to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

With this patch reverted on top of 4.14, 5.15-rc3 and next-20210927, the board boot successfully.

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: intel-ixp42x-welltech-epbx100 no longer boot due to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

[Krzysztof Hałasa]

Hello Corentin,

Corentin Labbe <clabbe.montjoie@gmail.com> writes:

> I am working on puting my ixp4xx board on kernelCI.
> But it no longer boot since 4.14.
> It only prints "Starting kernelUncompressing Linux... done, booting the kernel." then nothing.
>
> I bisected the break to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

I guess you build your kernel as big-endian.

These parts seem suspicious to me:

-    str r8, [r5]            @ Save physical start of kernel
+#ifdef CONFIG_CPU_ENDIAN_BE8
+    str r8, [r5, #4]            @ Save physical start of kernel (BE)
+#else
+    str r8, [r5]            @ Save physical start of kernel (LE)
+#endif

and

-    str r3, [r5]            @ Save physical end of kernel
+#ifdef CONFIG_CPU_ENDIAN_BE8
+    str r3, [r5, #4]            @ Save physical end of kernel (BE)
+#else
+    str r3, [r5]            @ Save physical end of kernel (LE)
+#endif

IXP4xx, being ARMv5, uses CONFIG_CPU_ENDIAN_BE32 (when configured as
BE), but it needs the ", #4" as well.

I'd test with: #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
--
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: intel-ixp42x-welltech-epbx100 no longer boot due to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")

[Corentin Labbe]

Le Tue, Sep 28, 2021 at 12:32:13PM +0200, Krzysztof Hałasa a écrit :
> Hello Corentin,
> 
> Corentin Labbe <clabbe.montjoie@gmail.com> writes:
> 
> > I am working on puting my ixp4xx board on kernelCI.
> > But it no longer boot since 4.14.
> > It only prints "Starting kernelUncompressing Linux... done, booting the kernel." then nothing.
> >
> > I bisected the break to 463dbba4d189 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")
> 
> I guess you build your kernel as big-endian.

Hello

Yes, IXP4XX is by default BE.

> 
> These parts seem suspicious to me:
> 
> -    str r8, [r5]            @ Save physical start of kernel
> +#ifdef CONFIG_CPU_ENDIAN_BE8
> +    str r8, [r5, #4]            @ Save physical start of kernel (BE)
> +#else
> +    str r8, [r5]            @ Save physical start of kernel (LE)
> +#endif
> 
> and
> 
> -    str r3, [r5]            @ Save physical end of kernel
> +#ifdef CONFIG_CPU_ENDIAN_BE8
> +    str r3, [r5, #4]            @ Save physical end of kernel (BE)
> +#else
> +    str r3, [r5]            @ Save physical end of kernel (LE)
> +#endif
> 
> IXP4xx, being ARMv5, uses CONFIG_CPU_ENDIAN_BE32 (when configured as
> BE), but it needs the ", #4" as well.
> 
> I'd test with: #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32

Thanks, with the following patch, my boards boots

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 29070eb8df7d..3fc7f9750ce4 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -253,7 +253,7 @@ __create_page_tables:
        add     r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
        ldr     r6, =(_end - 1)
        adr_l   r5, kernel_sec_start            @ _pa(kernel_sec_start)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
        str     r8, [r5, #4]                    @ Save physical start of kernel (BE)
 #else
        str     r8, [r5]                        @ Save physical start of kernel (LE)
@@ -266,7 +266,7 @@ __create_page_tables:
        bls     1b
        eor     r3, r3, r7                      @ Remove the MMU flags
        adr_l   r5, kernel_sec_end              @ _pa(kernel_sec_end)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
        str     r3, [r5, #4]                    @ Save physical end of kernel (BE)
 #else
        str     r3, [r5]                        @ Save physical end of kernel (LE)

Regards

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel