[PATCH v3 0/8] phy: socionext: Introduce some features for UniPhier SoCs

[PATCH v3 0/8] phy: socionext: Introduce some features for UniPhier SoCs

[Kunihiko Hayashi]

This series includes the patches to add the following features:
- Add basic support for new UniPhier NX1 SoC to USB3 and PCIe PHY.
  NX1 SoC also has the same kinds of controls as the other UniPhier SoCs.
- Add a PHY parameters to PCIe PHY
- Add dual-phy support for the SoCs that has two phys to PCIe PHY
- Add basic support for Pro4 SoC to ACHI PHY

---
Changes since v2:
- Fix order of clock-names and reset-names in dt-bindings
- Add minItems to clocks in dt-bindings
- Add Acked-by: lines

Changes since v1:
- Fix indentation of clocks and resets in AHCI PHY binding documentation
- Fix insufficient argument issue when adding dual-phy to PCIe PHY

Kunihiko Hayashi (8):
  dt-bindings: phy: uniphier-usb3: Add bindings for NX1 SoC
  phy: uniphier-usb3: Add compatible string for NX1 SoC
  dt-bindings: phy: uniphier-pcie: Add bindings for NX1 SoC
  phy: uniphier-pcie: Add compatible string and SoC-dependent data for
    NX1 SoC
  phy: uniphier-pcie: Set VCOPLL clamp mode in PHY register
  phy: uniphier-pcie: Add dual-phy support for NX1 SoC
  dt-bindings: phy: uniphier-ahci: Add bindings for Pro4 SoC
  phy: uniphier-ahci: Add support for Pro4 SoC

 .../bindings/phy/socionext,uniphier-ahci-phy.yaml  |  21 ++-
 .../bindings/phy/socionext,uniphier-pcie-phy.yaml  |   1 +
 .../phy/socionext,uniphier-usb3hs-phy.yaml         |   1 +
 .../phy/socionext,uniphier-usb3ss-phy.yaml         |   1 +
 drivers/phy/socionext/Kconfig                      |   2 +-
 drivers/phy/socionext/phy-uniphier-ahci.c          | 201 ++++++++++++++++++++-
 drivers/phy/socionext/phy-uniphier-pcie.c          |  70 +++++--
 drivers/phy/socionext/phy-uniphier-usb3hs.c        |   4 +
 drivers/phy/socionext/phy-uniphier-usb3ss.c        |   4 +
 9 files changed, 283 insertions(+), 22 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/8] dt-bindings: phy: uniphier-usb3: Add bindings for NX1 SoC

[Kunihiko Hayashi]

Update USB3-PHY binding document for UniPhier NX1 SoC. Add SS-PHY and
HS-PHY compatible strings for the SoC to the document.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml | 1 +
 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml | 1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index a681cbc3b4ef..33946efcac5e 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -22,6 +22,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-hsphy
       - socionext,uniphier-ld20-usb3-hsphy
       - socionext,uniphier-pxs3-usb3-hsphy
+      - socionext,uniphier-nx1-usb3-hsphy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 41c0dd68ee25..92d46eb913a3 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -23,6 +23,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-ssphy
       - socionext,uniphier-ld20-usb3-ssphy
       - socionext,uniphier-pxs3-usb3-ssphy
+      - socionext,uniphier-nx1-usb3-ssphy
 
   reg:
     maxItems: 1
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/8] phy: uniphier-usb3: Add compatible string for NX1 SoC

[Kunihiko Hayashi]

Add basic support for UniPhier NX1 SoC. This includes a compatible string
and the same SoC-dependent data as LD20/PXs3 SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/phy/socionext/phy-uniphier-usb3hs.c | 4 ++++
 drivers/phy/socionext/phy-uniphier-usb3ss.c | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c
index a9bc74121f38..8c8673df0084 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3hs.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c
@@ -447,6 +447,10 @@ static const struct of_device_id uniphier_u3hsphy_match[] = {
 		.compatible = "socionext,uniphier-pxs3-usb3-hsphy",
 		.data = &uniphier_pxs3_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-usb3-hsphy",
+		.data = &uniphier_pxs3_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, uniphier_u3hsphy_match);
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 6700645bcbe6..7ce611c2088b 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -328,6 +328,10 @@ static const struct of_device_id uniphier_u3ssphy_match[] = {
 		.compatible = "socionext,uniphier-pxs3-usb3-ssphy",
 		.data = &uniphier_ld20_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-usb3-ssphy",
+		.data = &uniphier_ld20_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, uniphier_u3ssphy_match);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/8] dt-bindings: phy: uniphier-pcie: Add bindings for NX1 SoC

[Kunihiko Hayashi]

Update PCIe-PHY binding document for UniPhier NX1 SoC. Add a compatible
string for the SoC to the document.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
index 3e0566899041..fbb71d6dd531 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -19,6 +19,7 @@ properties:
       - socionext,uniphier-pro5-pcie-phy
       - socionext,uniphier-ld20-pcie-phy
       - socionext,uniphier-pxs3-pcie-phy
+      - socionext,uniphier-nx1-pcie-phy
 
   reg:
     maxItems: 1
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/8] phy: uniphier-pcie: Add compatible string and SoC-dependent data for NX1 SoC

[Kunihiko Hayashi]

Add basic support for UniPhier NX1 SoC. This includes a compatible string,
SoC-dependent data, and a function that set to 2-lane mode.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/phy/socionext/phy-uniphier-pcie.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index 6bdbd1f214dd..fde8aac5f4b6 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -39,6 +39,10 @@
 #define SG_USBPCIESEL		0x590
 #define SG_USBPCIESEL_PCIE	BIT(0)
 
+/* SC */
+#define SC_US3SRCSEL		0x2244
+#define SC_US3SRCSEL_2LANE	GENMASK(9, 8)
+
 #define PCL_PHY_R00		0
 #define   RX_EQ_ADJ_EN		BIT(3)		/* enable for EQ adjustment */
 #define PCL_PHY_R06		6
@@ -261,6 +265,12 @@ static void uniphier_pciephy_ld20_setmode(struct regmap *regmap)
 			   SG_USBPCIESEL_PCIE, SG_USBPCIESEL_PCIE);
 }
 
+static void uniphier_pciephy_nx1_setmode(struct regmap *regmap)
+{
+	regmap_update_bits(regmap, SC_US3SRCSEL,
+			   SC_US3SRCSEL_2LANE, SC_US3SRCSEL_2LANE);
+}
+
 static const struct uniphier_pciephy_soc_data uniphier_pro5_data = {
 	.is_legacy = true,
 };
@@ -274,6 +284,11 @@ static const struct uniphier_pciephy_soc_data uniphier_pxs3_data = {
 	.is_legacy = false,
 };
 
+static const struct uniphier_pciephy_soc_data uniphier_nx1_data = {
+	.is_legacy = false,
+	.set_phymode = uniphier_pciephy_nx1_setmode,
+};
+
 static const struct of_device_id uniphier_pciephy_match[] = {
 	{
 		.compatible = "socionext,uniphier-pro5-pcie-phy",
@@ -287,6 +302,10 @@ static const struct of_device_id uniphier_pciephy_match[] = {
 		.compatible = "socionext,uniphier-pxs3-pcie-phy",
 		.data = &uniphier_pxs3_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-pcie-phy",
+		.data = &uniphier_nx1_data,
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, uniphier_pciephy_match);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 5/8] phy: uniphier-pcie: Set VCOPLL clamp mode in PHY register

[Kunihiko Hayashi]

Set VCOPLL clamp mode to mode 0 to avoid hardware unstable issue.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/phy/socionext/phy-uniphier-pcie.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index fde8aac5f4b6..2bd8df619712 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -51,6 +51,9 @@
 #define PCL_PHY_R26		26
 #define   VCO_CTRL		GENMASK(7, 4)	/* Tx VCO adjustment value */
 #define   VCO_CTRL_INIT_VAL	5
+#define PCL_PHY_R28		28
+#define   VCOPLL_CLMP		GENMASK(3, 2)	/* Tx VCOPLL clamp mode */
+#define   VCOPLL_CLMP_VAL	0
 
 struct uniphier_pciephy_priv {
 	void __iomem *base;
@@ -158,6 +161,8 @@ static int uniphier_pciephy_init(struct phy *phy)
 				   FIELD_PREP(RX_EQ_ADJ, RX_EQ_ADJ_VAL));
 	uniphier_pciephy_set_param(priv, PCL_PHY_R26, VCO_CTRL,
 				   FIELD_PREP(VCO_CTRL, VCO_CTRL_INIT_VAL));
+	uniphier_pciephy_set_param(priv, PCL_PHY_R28, VCOPLL_CLMP,
+				   FIELD_PREP(VCOPLL_CLMP, VCOPLL_CLMP_VAL));
 	usleep_range(1, 10);
 
 	uniphier_pciephy_deassert(priv);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 6/8] phy: uniphier-pcie: Add dual-phy support for NX1 SoC

[Kunihiko Hayashi]

NX1 SoC supports 2 lanes and has dual-phy. Should set appropriate
configuration values to both PHY registers.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/phy/socionext/phy-uniphier-pcie.c | 48 ++++++++++++++++++++++---------
 1 file changed, 34 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index 2bd8df619712..ebca296ef123 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -27,6 +27,7 @@
 #define TESTI_DAT_MASK		GENMASK(13, 6)
 #define TESTI_ADR_MASK		GENMASK(5, 1)
 #define TESTI_WR_EN		BIT(0)
+#define TESTIO_PHY_SHIFT	16
 
 #define PCL_PHY_TEST_O		0x2004
 #define TESTO_DAT_MASK		GENMASK(7, 0)
@@ -65,43 +66,57 @@ struct uniphier_pciephy_priv {
 
 struct uniphier_pciephy_soc_data {
 	bool is_legacy;
+	bool is_dual_phy;
 	void (*set_phymode)(struct regmap *regmap);
 };
 
 static void uniphier_pciephy_testio_write(struct uniphier_pciephy_priv *priv,
-					  u32 data)
+					  int id, u32 data)
 {
+	if (id)
+		data <<= TESTIO_PHY_SHIFT;
+
 	/* need to read TESTO twice after accessing TESTI */
 	writel(data, priv->base + PCL_PHY_TEST_I);
 	readl(priv->base + PCL_PHY_TEST_O);
 	readl(priv->base + PCL_PHY_TEST_O);
 }
 
+static u32 uniphier_pciephy_testio_read(struct uniphier_pciephy_priv *priv, int id)
+{
+	u32 val = readl(priv->base + PCL_PHY_TEST_O);
+
+	if (id)
+		val >>= TESTIO_PHY_SHIFT;
+
+	return val & TESTO_DAT_MASK;
+}
+
 static void uniphier_pciephy_set_param(struct uniphier_pciephy_priv *priv,
-				       u32 reg, u32 mask, u32 param)
+				       int id, u32 reg, u32 mask, u32 param)
 {
 	u32 val;
 
 	/* read previous data */
 	val  = FIELD_PREP(TESTI_DAT_MASK, 1);
 	val |= FIELD_PREP(TESTI_ADR_MASK, reg);
-	uniphier_pciephy_testio_write(priv, val);
-	val = readl(priv->base + PCL_PHY_TEST_O) & TESTO_DAT_MASK;
+	uniphier_pciephy_testio_write(priv, id, val);
+	val = uniphier_pciephy_testio_read(priv, id);
 
 	/* update value */
 	val &= ~mask;
 	val |= mask & param;
 	val = FIELD_PREP(TESTI_DAT_MASK, val);
 	val |= FIELD_PREP(TESTI_ADR_MASK, reg);
-	uniphier_pciephy_testio_write(priv, val);
-	uniphier_pciephy_testio_write(priv, val | TESTI_WR_EN);
-	uniphier_pciephy_testio_write(priv, val);
+	uniphier_pciephy_testio_write(priv, id, val);
+	uniphier_pciephy_testio_write(priv, id, val | TESTI_WR_EN);
+	uniphier_pciephy_testio_write(priv, id, val);
 
 	/* read current data as dummy */
 	val  = FIELD_PREP(TESTI_DAT_MASK, 1);
 	val |= FIELD_PREP(TESTI_ADR_MASK, reg);
-	uniphier_pciephy_testio_write(priv, val);
-	readl(priv->base + PCL_PHY_TEST_O);
+	uniphier_pciephy_testio_write(priv, id, val);
+	uniphier_pciephy_testio_read(priv, id);
 }
 
 static void uniphier_pciephy_assert(struct uniphier_pciephy_priv *priv)
@@ -127,7 +142,7 @@ static int uniphier_pciephy_init(struct phy *phy)
 {
 	struct uniphier_pciephy_priv *priv = phy_get_drvdata(phy);
 	u32 val;
-	int ret;
+	int ret, id;
 
 	ret = clk_prepare_enable(priv->clk);
 	if (ret)
@@ -155,14 +170,16 @@ static int uniphier_pciephy_init(struct phy *phy)
 	if (priv->data->is_legacy)
 		return 0;
 
-	uniphier_pciephy_set_param(priv, PCL_PHY_R00,
+	for (id = 0; id < (priv->data->is_dual_phy ? 2 : 1); id++) {
+		uniphier_pciephy_set_param(priv, id, PCL_PHY_R00,
 				   RX_EQ_ADJ_EN, RX_EQ_ADJ_EN);
-	uniphier_pciephy_set_param(priv, PCL_PHY_R06, RX_EQ_ADJ,
+		uniphier_pciephy_set_param(priv, id, PCL_PHY_R06, RX_EQ_ADJ,
 				   FIELD_PREP(RX_EQ_ADJ, RX_EQ_ADJ_VAL));
-	uniphier_pciephy_set_param(priv, PCL_PHY_R26, VCO_CTRL,
+		uniphier_pciephy_set_param(priv, id, PCL_PHY_R26, VCO_CTRL,
 				   FIELD_PREP(VCO_CTRL, VCO_CTRL_INIT_VAL));
-	uniphier_pciephy_set_param(priv, PCL_PHY_R28, VCOPLL_CLMP,
+		uniphier_pciephy_set_param(priv, id, PCL_PHY_R28, VCOPLL_CLMP,
 				   FIELD_PREP(VCOPLL_CLMP, VCOPLL_CLMP_VAL));
+	}
 	usleep_range(1, 10);
 
 	uniphier_pciephy_deassert(priv);
@@ -282,15 +299,18 @@ static const struct uniphier_pciephy_soc_data uniphier_pro5_data = {
 
 static const struct uniphier_pciephy_soc_data uniphier_ld20_data = {
 	.is_legacy = false,
+	.is_dual_phy = false,
 	.set_phymode = uniphier_pciephy_ld20_setmode,
 };
 
 static const struct uniphier_pciephy_soc_data uniphier_pxs3_data = {
 	.is_legacy = false,
+	.is_dual_phy = false,
 };
 
 static const struct uniphier_pciephy_soc_data uniphier_nx1_data = {
 	.is_legacy = false,
+	.is_dual_phy = true,
 	.set_phymode = uniphier_pciephy_nx1_setmode,
 };
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 7/8] dt-bindings: phy: uniphier-ahci: Add bindings for Pro4 SoC

[Kunihiko Hayashi]

Update AHCI-PHY binding document for UniPhier Pro4 SoC. Add a compatible
string, clock and reset lines for the SoC to the document.

Pro4 AHCI-PHY needs to control additional GIO clock line and reset lines
("pm", "tx", and "rx").

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../bindings/phy/socionext,uniphier-ahci-phy.yaml   | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index 745c525ce6b9..3b400a85b44a 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -16,6 +16,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - socionext,uniphier-pro4-ahci-phy
       - socionext,uniphier-pxs2-ahci-phy
       - socionext,uniphier-pxs3-ahci-phy
 
@@ -26,23 +27,35 @@ properties:
     const: 0
 
   clocks:
+    minItems: 1
     maxItems: 2
 
   clock-names:
     oneOf:
       - items:          # for PXs2
           - const: link
+      - items:          # for Pro4
+          - const: link
+          - const: gio
       - items:          # for others
           - const: link
           - const: phy
 
   resets:
-    maxItems: 2
+    minItems: 2
+    maxItems: 5
 
   reset-names:
-    items:
-      - const: link
-      - const: phy
+    oneOf:
+      - items:          # for Pro4
+          - const: link
+          - const: gio
+          - const: pm
+          - const: tx
+          - const: rx
+      - items:          # for others
+          - const: link
+          - const: phy
 
 required:
   - compatible
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 7/8] dt-bindings: phy: uniphier-ahci: Add bindings for Pro4 SoC

[Rob Herring]

On Fri, 29 Oct 2021 19:39:06 +0900, Kunihiko Hayashi wrote:
> Update AHCI-PHY binding document for UniPhier Pro4 SoC. Add a compatible
> string, clock and reset lines for the SoC to the document.
> 
> Pro4 AHCI-PHY needs to control additional GIO clock line and reset lines
> ("pm", "tx", and "rx").
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../bindings/phy/socionext,uniphier-ahci-phy.yaml   | 21 +++++++++++++++++----
>  1 file changed, 17 insertions(+), 4 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 8/8] phy: uniphier-ahci: Add support for Pro4 SoC

[Kunihiko Hayashi]

Add support for PHY interface built into ahci controller implemented
in UniPhier Pro4 SoC.

Pro4 SoC distinguishes it from other SoCs as "legacy" SoC, which has GIO
clock line. And Pro4 AHCI-PHY needs to control additional reset lines
("pm", "tx", and "rx").

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 drivers/phy/socionext/Kconfig             |   2 +-
 drivers/phy/socionext/phy-uniphier-ahci.c | 201 +++++++++++++++++++++++++++++-
 2 files changed, 198 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index a3970e0f89da..8ae644756352 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -43,4 +43,4 @@ config PHY_UNIPHIER_AHCI
 	select GENERIC_PHY
 	help
 	  Enable this to support PHY implemented in AHCI controller
-	  on UniPhier SoCs. This driver supports PXs2 and PXs3 SoCs.
+	  on UniPhier SoCs. This driver supports Pro4, PXs2 and PXs3 SoCs.
diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c
index 7427c40bf4ae..28cf3efe0695 100644
--- a/drivers/phy/socionext/phy-uniphier-ahci.c
+++ b/drivers/phy/socionext/phy-uniphier-ahci.c
@@ -19,8 +19,9 @@
 struct uniphier_ahciphy_priv {
 	struct device *dev;
 	void __iomem  *base;
-	struct clk *clk, *clk_parent;
-	struct reset_control *rst, *rst_parent;
+	struct clk *clk, *clk_parent, *clk_parent_gio;
+	struct reset_control *rst, *rst_parent, *rst_parent_gio;
+	struct reset_control *rst_pm, *rst_tx, *rst_rx;
 	const struct uniphier_ahciphy_soc_data *data;
 };
 
@@ -28,10 +29,30 @@ struct uniphier_ahciphy_soc_data {
 	int (*init)(struct uniphier_ahciphy_priv *priv);
 	int (*power_on)(struct uniphier_ahciphy_priv *priv);
 	int (*power_off)(struct uniphier_ahciphy_priv *priv);
+	bool is_legacy;
 	bool is_ready_high;
 	bool is_phy_clk;
 };
 
+/* for Pro4 */
+#define CKCTRL0				0x0
+#define CKCTRL0_CK_OFF			BIT(9)
+#define CKCTRL0_NCY_MASK		GENMASK(8, 4)
+#define CKCTRL0_NCY5_MASK		GENMASK(3, 2)
+#define CKCTRL0_PRESCALE_MASK		GENMASK(1, 0)
+#define CKCTRL1				0x4
+#define CKCTRL1_LOS_LVL_MASK		GENMASK(20, 16)
+#define CKCTRL1_TX_LVL_MASK		GENMASK(12, 8)
+#define RXTXCTRL			0x8
+#define RXTXCTRL_RX_EQ_VALL_MASK	GENMASK(31, 29)
+#define RXTXCTRL_RX_DPLL_MODE_MASK	GENMASK(28, 26)
+#define RXTXCTRL_TX_ATTEN_MASK		GENMASK(14, 12)
+#define RXTXCTRL_TX_BOOST_MASK		GENMASK(11, 8)
+#define RXTXCTRL_TX_EDGERATE_MASK	GENMASK(3, 2)
+#define RXTXCTRL_TX_CKO_EN		BIT(0)
+#define RSTPWR				0x30
+#define RSTPWR_RX_EN_VAL		BIT(18)
+
 /* for PXs2/PXs3 */
 #define CKCTRL				0x0
 #define CKCTRL_P0_READY			BIT(15)
@@ -50,6 +71,128 @@ struct uniphier_ahciphy_soc_data {
 #define RXCTRL_LOS_BIAS_MASK		GENMASK(10, 8)
 #define RXCTRL_RX_EQ_MASK		GENMASK(2, 0)
 
+static int uniphier_ahciphy_pro4_init(struct uniphier_ahciphy_priv *priv)
+{
+	u32 val;
+
+	/* set phy MPLL parameters */
+	val = readl(priv->base + CKCTRL0);
+	val &= ~CKCTRL0_NCY_MASK;
+	val |= FIELD_PREP(CKCTRL0_NCY_MASK, 0x6);
+	val &= ~CKCTRL0_NCY5_MASK;
+	val |= FIELD_PREP(CKCTRL0_NCY5_MASK, 0x2);
+	val &= ~CKCTRL0_PRESCALE_MASK;
+	val |= FIELD_PREP(CKCTRL0_PRESCALE_MASK, 0x1);
+	writel(val, priv->base + CKCTRL0);
+
+	/* setup phy control parameters */
+	val = readl(priv->base + CKCTRL1);
+	val &= ~CKCTRL1_LOS_LVL_MASK;
+	val |= FIELD_PREP(CKCTRL1_LOS_LVL_MASK, 0x10);
+	val &= ~CKCTRL1_TX_LVL_MASK;
+	val |= FIELD_PREP(CKCTRL1_TX_LVL_MASK, 0x06);
+	writel(val, priv->base + CKCTRL1);
+
+	val = readl(priv->base + RXTXCTRL);
+	val &= ~RXTXCTRL_RX_EQ_VALL_MASK;
+	val |= FIELD_PREP(RXTXCTRL_RX_EQ_VALL_MASK, 0x6);
+	val &= ~RXTXCTRL_RX_DPLL_MODE_MASK;
+	val |= FIELD_PREP(RXTXCTRL_RX_DPLL_MODE_MASK, 0x3);
+	val &= ~RXTXCTRL_TX_ATTEN_MASK;
+	val |= FIELD_PREP(RXTXCTRL_TX_ATTEN_MASK, 0x3);
+	val &= ~RXTXCTRL_TX_BOOST_MASK;
+	val |= FIELD_PREP(RXTXCTRL_TX_BOOST_MASK, 0x5);
+	val &= ~RXTXCTRL_TX_EDGERATE_MASK;
+	val |= FIELD_PREP(RXTXCTRL_TX_EDGERATE_MASK, 0x0);
+	writel(val, priv->base + RXTXCTRL);
+
+	return 0;
+}
+
+static int uniphier_ahciphy_pro4_power_on(struct uniphier_ahciphy_priv *priv)
+{
+	u32 val;
+	int ret;
+
+	/* enable reference clock for phy */
+	val = readl(priv->base + CKCTRL0);
+	val &= ~CKCTRL0_CK_OFF;
+	writel(val, priv->base + CKCTRL0);
+
+	/* enable TX clock */
+	val = readl(priv->base + RXTXCTRL);
+	val |= RXTXCTRL_TX_CKO_EN;
+	writel(val, priv->base + RXTXCTRL);
+
+	/* wait until RX is ready */
+	ret = readl_poll_timeout(priv->base + RSTPWR, val,
+				 !(val & RSTPWR_RX_EN_VAL), 200, 2000);
+	if (ret) {
+		dev_err(priv->dev, "Failed to check whether Rx is ready\n");
+		goto out_disable_clock;
+	}
+
+	/* release all reset */
+	ret = reset_control_deassert(priv->rst_pm);
+	if (ret) {
+		dev_err(priv->dev, "Failed to release PM reset\n");
+		goto out_disable_clock;
+	}
+
+	ret = reset_control_deassert(priv->rst_tx);
+	if (ret) {
+		dev_err(priv->dev, "Failed to release Tx reset\n");
+		goto out_reset_pm_assert;
+	}
+
+	ret = reset_control_deassert(priv->rst_rx);
+	if (ret) {
+		dev_err(priv->dev, "Failed to release Rx reset\n");
+		goto out_reset_tx_assert;
+	}
+
+	return 0;
+
+out_reset_tx_assert:
+	reset_control_assert(priv->rst_tx);
+out_reset_pm_assert:
+	reset_control_assert(priv->rst_pm);
+
+out_disable_clock:
+	/* disable TX clock */
+	val = readl(priv->base + RXTXCTRL);
+	val &= ~RXTXCTRL_TX_CKO_EN;
+	writel(val, priv->base + RXTXCTRL);
+
+	/* disable reference clock for phy */
+	val = readl(priv->base + CKCTRL0);
+	val |= CKCTRL0_CK_OFF;
+	writel(val, priv->base + CKCTRL0);
+
+	return ret;
+}
+
+static int uniphier_ahciphy_pro4_power_off(struct uniphier_ahciphy_priv *priv)
+{
+	u32 val;
+
+	reset_control_assert(priv->rst_rx);
+	reset_control_assert(priv->rst_tx);
+	reset_control_assert(priv->rst_pm);
+
+	/* disable TX clock */
+	val = readl(priv->base + RXTXCTRL);
+	val &= ~RXTXCTRL_TX_CKO_EN;
+	writel(val, priv->base + RXTXCTRL);
+
+	/* disable reference clock for phy */
+	val = readl(priv->base + CKCTRL0);
+	val |= CKCTRL0_CK_OFF;
+	writel(val, priv->base + CKCTRL0);
+
+	return 0;
+}
+
 static void uniphier_ahciphy_pxs2_enable(struct uniphier_ahciphy_priv *priv,
 					 bool enable)
 {
@@ -142,14 +285,22 @@ static int uniphier_ahciphy_init(struct phy *phy)
 	struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
-	ret = clk_prepare_enable(priv->clk_parent);
+	ret = clk_prepare_enable(priv->clk_parent_gio);
 	if (ret)
 		return ret;
 
-	ret = reset_control_deassert(priv->rst_parent);
+	ret = clk_prepare_enable(priv->clk_parent);
+	if (ret)
+		goto out_clk_gio_disable;
+
+	ret = reset_control_deassert(priv->rst_parent_gio);
 	if (ret)
 		goto out_clk_disable;
 
+	ret = reset_control_deassert(priv->rst_parent);
+	if (ret)
+		goto out_rst_gio_assert;
+
 	if (priv->data->init) {
 		ret = priv->data->init(priv);
 		if (ret)
@@ -160,8 +311,12 @@ static int uniphier_ahciphy_init(struct phy *phy)
 
 out_rst_assert:
 	reset_control_assert(priv->rst_parent);
+out_rst_gio_assert:
+	reset_control_assert(priv->rst_parent_gio);
 out_clk_disable:
 	clk_disable_unprepare(priv->clk_parent);
+out_clk_gio_disable:
+	clk_disable_unprepare(priv->clk_parent_gio);
 
 	return ret;
 }
@@ -171,7 +326,9 @@ static int uniphier_ahciphy_exit(struct phy *phy)
 	struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
 
 	reset_control_assert(priv->rst_parent);
+	reset_control_assert(priv->rst_parent_gio);
 	clk_disable_unprepare(priv->clk_parent);
+	clk_disable_unprepare(priv->clk_parent_gio);
 
 	return 0;
 }
@@ -265,6 +422,28 @@ static int uniphier_ahciphy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->rst))
 		return PTR_ERR(priv->rst);
 
+	if (priv->data->is_legacy) {
+		priv->clk_parent_gio = devm_clk_get(dev, "gio");
+		if (IS_ERR(priv->clk_parent_gio))
+			return PTR_ERR(priv->clk_parent_gio);
+		priv->rst_parent_gio =
+			devm_reset_control_get_shared(dev, "gio");
+		if (IS_ERR(priv->rst_parent_gio))
+			return PTR_ERR(priv->rst_parent_gio);
+
+		priv->rst_pm = devm_reset_control_get_shared(dev, "pm");
+		if (IS_ERR(priv->rst_pm))
+			return PTR_ERR(priv->rst_pm);
+
+		priv->rst_tx = devm_reset_control_get_shared(dev, "tx");
+		if (IS_ERR(priv->rst_tx))
+			return PTR_ERR(priv->rst_tx);
+
+		priv->rst_rx = devm_reset_control_get_shared(dev, "rx");
+		if (IS_ERR(priv->rst_rx))
+			return PTR_ERR(priv->rst_rx);
+	}
+
 	phy = devm_phy_create(dev, dev->of_node, &uniphier_ahciphy_ops);
 	if (IS_ERR(phy)) {
 		dev_err(dev, "failed to create phy\n");
@@ -279,9 +458,18 @@ static int uniphier_ahciphy_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct uniphier_ahciphy_soc_data uniphier_pro4_data = {
+	.init = uniphier_ahciphy_pro4_init,
+	.power_on  = uniphier_ahciphy_pro4_power_on,
+	.power_off = uniphier_ahciphy_pro4_power_off,
+	.is_legacy = true,
+	.is_phy_clk = false,
+};
+
 static const struct uniphier_ahciphy_soc_data uniphier_pxs2_data = {
 	.power_on  = uniphier_ahciphy_pxs2_power_on,
 	.power_off = uniphier_ahciphy_pxs2_power_off,
+	.is_legacy = false,
 	.is_ready_high = false,
 	.is_phy_clk = false,
 };
@@ -290,12 +478,17 @@ static const struct uniphier_ahciphy_soc_data uniphier_pxs3_data = {
 	.init      = uniphier_ahciphy_pxs3_init,
 	.power_on  = uniphier_ahciphy_pxs2_power_on,
 	.power_off = uniphier_ahciphy_pxs2_power_off,
+	.is_legacy = false,
 	.is_ready_high = true,
 	.is_phy_clk = true,
 };
 
 static const struct of_device_id uniphier_ahciphy_match[] = {
 	{
+		.compatible = "socionext,uniphier-pro4-ahci-phy",
+		.data = &uniphier_pro4_data,
+	},
+	{
 		.compatible = "socionext,uniphier-pxs2-ahci-phy",
 		.data = &uniphier_pxs2_data,
 	},
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/8] phy: socionext: Introduce some features for UniPhier SoCs

[Vinod Koul]

On 29-10-21, 19:38, Kunihiko Hayashi wrote:
> This series includes the patches to add the following features:
> - Add basic support for new UniPhier NX1 SoC to USB3 and PCIe PHY.
>   NX1 SoC also has the same kinds of controls as the other UniPhier SoCs.
> - Add a PHY parameters to PCIe PHY
> - Add dual-phy support for the SoCs that has two phys to PCIe PHY
> - Add basic support for Pro4 SoC to ACHI PHY

Applied, thanks

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel