* [PATCH v1 1/1] ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init()
@ 2021-12-14 13:32 Andy Shevchenko
2021-12-14 13:41 ` Russell King (Oracle)
0 siblings, 1 reply; 3+ messages in thread
From: Andy Shevchenko @ 2021-12-14 13:32 UTC (permalink / raw)
To: Andy Shevchenko, linux-arm-kernel, linux-kernel
Cc: Andrew Lunn, Sebastian Hesselbarth, Gregory Clement, Russell King
The OF node pointer is always NULL, get rid of unused parameter in
orion_gpio_init(). As a side effect it will allow to switch GPIO
library to the fwnode API, as well as in case of resurrecting it here
it should be fwnode_handle anyways.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/arm/mach-dove/irq.c | 11 +++--------
arch/arm/mach-mv78xx0/irq.c | 3 +--
arch/arm/mach-orion5x/irq.c | 3 +--
arch/arm/plat-orion/gpio.c | 8 ++------
arch/arm/plat-orion/include/plat/orion-gpio.h | 3 +--
5 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 31ccbcee2627..c7ad6e5c37b0 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -73,12 +73,7 @@ void __init dove_init_irq(void)
/*
* Initialize gpiolib for GPIOs 0-71.
*/
- orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START, gpio0_irqs);
-
- orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
-
- orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
- IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
+ orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs);
+ orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
+ orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
}
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 788569e960e1..0b5f055ca1c3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -67,7 +67,6 @@ void __init mv78xx0_init_irq(void)
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/
- orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
- mv78xx0_core_index() ? 0x18 : 0,
+ orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0,
IRQ_MV78XX0_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ac4af2283bef..62d0f4877b2a 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -49,6 +49,5 @@ void __init orion5x_init_irq(void)
/*
* Initialize gpiolib for GPIOs 0-31.
*/
- orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
- IRQ_ORION5X_GPIO_START, gpio0_irqs);
+ orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 734f0be4f14a..3ef9ecdd6343 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -516,8 +516,7 @@ static void orion_gpio_mask_irq(struct irq_data *d)
irq_gc_unlock(gc);
}
-void __init orion_gpio_init(struct device_node *np,
- int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
int secondary_irq_base,
int irqs[4])
@@ -545,9 +544,6 @@ void __init orion_gpio_init(struct device_node *np,
ochip->chip.base = gpio_base;
ochip->chip.ngpio = ngpio;
ochip->chip.can_sleep = 0;
-#ifdef CONFIG_OF
- ochip->chip.of_node = np;
-#endif
ochip->chip.dbg_show = orion_gpio_dbg_show;
spin_lock_init(&ochip->lock);
@@ -605,7 +601,7 @@ void __init orion_gpio_init(struct device_node *np,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
- ochip->domain = irq_domain_add_legacy(np,
+ ochip->domain = irq_domain_add_legacy(NULL,
ochip->chip.ngpio,
ochip->secondary_irq_base,
ochip->secondary_irq_base,
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index e856b073a9c8..25a2963e0e0f 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -30,8 +30,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
void orion_gpio_set_valid(unsigned pin, int mode);
/* Initialize gpiolib. */
-void __init orion_gpio_init(struct device_node *np,
- int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
int secondary_irq_base,
int irq[4]);
--
2.33.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v1 1/1] ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init()
2021-12-14 13:32 [PATCH v1 1/1] ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init() Andy Shevchenko
@ 2021-12-14 13:41 ` Russell King (Oracle)
2021-12-14 13:58 ` Andy Shevchenko
0 siblings, 1 reply; 3+ messages in thread
From: Russell King (Oracle) @ 2021-12-14 13:41 UTC (permalink / raw)
To: Andy Shevchenko
Cc: linux-arm-kernel, linux-kernel, Andrew Lunn,
Sebastian Hesselbarth, Gregory Clement
On Tue, Dec 14, 2021 at 03:32:43PM +0200, Andy Shevchenko wrote:
> The OF node pointer is always NULL, get rid of unused parameter in
> orion_gpio_init(). As a side effect it will allow to switch GPIO
> library to the fwnode API, as well as in case of resurrecting it here
> it should be fwnode_handle anyways.
Please ensure the new code follows the existing style - especially in
terms of wrapping. Some of us still use 80 columns as a general rule.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v1 1/1] ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init()
2021-12-14 13:41 ` Russell King (Oracle)
@ 2021-12-14 13:58 ` Andy Shevchenko
0 siblings, 0 replies; 3+ messages in thread
From: Andy Shevchenko @ 2021-12-14 13:58 UTC (permalink / raw)
To: Russell King (Oracle)
Cc: linux-arm-kernel, linux-kernel, Andrew Lunn,
Sebastian Hesselbarth, Gregory Clement
On Tue, Dec 14, 2021 at 01:41:29PM +0000, Russell King (Oracle) wrote:
> On Tue, Dec 14, 2021 at 03:32:43PM +0200, Andy Shevchenko wrote:
> > The OF node pointer is always NULL, get rid of unused parameter in
> > orion_gpio_init(). As a side effect it will allow to switch GPIO
> > library to the fwnode API, as well as in case of resurrecting it here
> > it should be fwnode_handle anyways.
>
> Please ensure the new code follows the existing style - especially in
> terms of wrapping. Some of us still use 80 columns as a general rule.
> Thanks.
Ah, okay, I will fix that for v2.
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-12-14 14:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-14 13:32 [PATCH v1 1/1] ARM: orion/gpio: Get rid of unused first parameter in orion_gpio_init() Andy Shevchenko
2021-12-14 13:41 ` Russell King (Oracle)
2021-12-14 13:58 ` Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).