From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 52C90C433EF for ; Tue, 14 Dec 2021 16:40:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=dspBKWhYxnAD3iLP+R/UaWCDXl1I9eH1BSptGCP40LQ=; b=sfUyfGyCi+YCHK 6Am6iXb7FFx5tGV5DcKeyfzmUWCKCCJ9E9RXYBA8h3vVYcri7qCI/0O1dBpPmn9DnbPdIHNLUuhlW NE1onxTwN5yApw8ktTfMfK4czOJ3HoiiC62dzbvNApjA0h863TSYNMv2mvL06J1vTzbWXinzURq85 hDhBhqF76NYxgSz0uWAOkgsqd7bF3M+iYGcufcGgWV7gG56iXrg4fFtXqN6pNAQZUkH+oKwlNZDjC RMDfqLYSxhnBx3FNp6dM/czK94qNSHsP3JKJ1Nzk8RkeI0ziDBBQNy/ldutXrAPAoiLA1rP8IqIVM cFun1lTWf/u0PS0FXoEw==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mxApF-00Evr4-Sw; Tue, 14 Dec 2021 16:38:50 +0000 Received: from mail-ot1-f51.google.com ([209.85.210.51]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mxAp0-00Evmx-4N; Tue, 14 Dec 2021 16:38:36 +0000 Received: by mail-ot1-f51.google.com with SMTP id x3-20020a05683000c300b0057a5318c517so21369522oto.13; Tue, 14 Dec 2021 08:38:32 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=QM2/tlWF4m4H0IDZNmPQ7oJ/pIe6U5NfI4L3E8LZyOo=; b=6s9eF7VXlDqRylfnPxTubbk6o7YJ78xuk2bSTgdZMn9dLnV4S/LG9AEmn9EGRskfWH BLZX98EL5su8/bVyFzYKFfSuunoXuIjWhG6zPdhvygdcZynSzR2V9iY3fi99OMJXVqN8 mR6AFSbCVVjg0IL9R1ZJoJE1Lq1CBoHVpQ+0otKSXYBytBIkbMJE8eD0Zwyet6CGnivO pfs9IGK1aVxa2Cg7TWmszySJGJXtFv+OELI8GCP10FI5xsiyRLlnw2QzsB+LiaM9SOOA 58yLIE7PJ83ly7n7D1jSCCitL1xa3IkR2pZGvJwmD+fhsMOC1cOuHR2bZkjkA6nNZ0wd CDwA== X-Gm-Message-State: AOAM531q7pq0pyo+zblmbFqerRA12Vz+/ndOu7n1yvS1xAQUam/+VElx xXO/aGM0I5pC4IqI08Z7JQ== X-Google-Smtp-Source: ABdhPJyPsHdUh009xZPGC2dJCH5F9i05bHswcSnmYZM9pkvZplYAs5LXDQf0IswpoCkzvH4kv7hoYg== X-Received: by 2002:a9d:69ce:: with SMTP id v14mr5090534oto.312.1639499911734; Tue, 14 Dec 2021 08:38:31 -0800 (PST) Received: from robh.at.kernel.org (66-90-148-213.dyn.grandenetworks.net. [66.90.148.213]) by smtp.gmail.com with ESMTPSA id o10sm59268oom.32.2021.12.14.08.38.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 14 Dec 2021 08:38:30 -0800 (PST) Received: (nullmailer pid 3518884 invoked by uid 1000); Tue, 14 Dec 2021 16:38:29 -0000 Date: Tue, 14 Dec 2021 10:38:29 -0600 From: Rob Herring To: Tinghan Shen Cc: linus.walleij@linaro.org, matthias.bgg@gmail.com, broonie@kernel.org, bgolaszewski@baylibre.com, sean.wang@mediatek.com, bayi.cheng@mediatek.com, gch981213@gmail.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-spi@vger.kernel.org, Project_Global_Chrome_Upstream_Group@mediatek.com Subject: Re: [PATCH v6 3/4] dt-bindings: pinctrl: mt8195: add 'pins' wrapping node Message-ID: References: <20211211204014.8014-1-tinghan.shen@mediatek.com> <20211211204014.8014-4-tinghan.shen@mediatek.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20211211204014.8014-4-tinghan.shen@mediatek.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211214_083834_224810_1451F84E X-CRM114-Status: GOOD ( 22.62 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org On Sun, Dec 12, 2021 at 04:40:13AM +0800, Tinghan Shen wrote: > The mt8195 pinctrl driver requires a 'pins' subnode to wrap pin properties. Why? > Signed-off-by: Tinghan Shen > --- > .../bindings/pinctrl/pinctrl-mt8195.yaml | 307 +++++++++--------- > 1 file changed, 160 insertions(+), 147 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > index 5e2bb2bf3a55..2035bf164740 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml > @@ -59,133 +59,143 @@ properties: > patternProperties: > '-pins$': > type: object > - description: | > - A pinctrl node should contain at least one subnodes representing the > - pinctrl groups available on the machine. Each subnode will list the > - pins it needs, and how they should be configured, with regard to muxer > - configuration, pullups, drive strength, input enable/disable and > - input schmitt. > - An example of using macro: > - pincontroller { > - /* GPIO0 set as multifunction GPIO0 */ > - gpio_pin { > - pinmux = ; > - }; > - /* GPIO8 set as multifunction SDA0 */ > - i2c0_pin { > - pinmux = ; > - }; > - }; > - $ref: "pinmux-node.yaml" > - > - properties: > - pinmux: > - description: | > - Integer array, represents gpio pin number and mux setting. > - Supported pin number and mux varies for different SoCs, and are defined > - as macros in dt-bindings/pinctrl/-pinfunc.h directly. > - > - drive-strength: > - enum: [2, 4, 6, 8, 10, 12, 14, 16] > - > - bias-pull-down: > - description: | > - For pull down type is normal, it don't need add RSEL & R1R0 define > - and resistance value. > - For pull down type is PUPD/R0/R1 type, it can add R1R0 define to > - set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" > - define in mt8195. > - For pull down type is RSEL, it can add RSEL define & resistance value(ohm) > - to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". > - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" > - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > - define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195. > - oneOf: > - - enum: [100, 101, 102, 103] > - - description: mt8195 pull down PUPD/R0/R1 type define value. > - - enum: [200, 201, 202, 203, 204, 205, 206, 207] > - - description: mt8195 pull down RSEL type define value. > - - enum: [75000, 5000] > - - description: mt8195 pull down RSEL type si unit value(ohm). > - > - An example of using RSEL define: > - pincontroller { > - i2c0_pin { > - pinmux = ; > - bias-pull-down = ; > - }; > - }; > - An example of using si unit resistance value(ohm): > - &pio { > - mediatek,rsel_resistance_in_si_unit; > - } > - pincontroller { > - i2c0_pin { > - pinmux = ; > - bias-pull-down = <75000>; > - }; > - }; > - > - bias-pull-up: > + additionalProperties: false > + patternProperties: > + 'pins': Can we constrain this a bit more. > + type: object > + additionalProperties: false > description: | > - For pull up type is normal, it don't need add RSEL & R1R0 define > - and resistance value. > - For pull up type is PUPD/R0/R1 type, it can add R1R0 define to > - set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" > - define in mt8195. > - For pull up type is RSEL, it can add RSEL define & resistance value(ohm) > - to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit". > - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" > - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > - define in mt8195. It can also support resistance value(ohm) > - "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195. > - oneOf: > - - enum: [100, 101, 102, 103] > - - description: mt8195 pull up PUPD/R0/R1 type define value. > - - enum: [200, 201, 202, 203, 204, 205, 206, 207] > - - description: mt8195 pull up RSEL type define value. > - - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] > - - description: mt8195 pull up RSEL type si unit value(ohm). > - An example of using RSEL define: > + A pinctrl node should contain at least one subnodes representing the > + pinctrl groups available on the machine. Each subnode will list the > + pins it needs, and how they should be configured, with regard to muxer > + configuration, pullups, drive strength, input enable/disable and > + input schmitt. > + An example of using macro: > pincontroller { > - i2c0_pin { > - pinmux = ; > - bias-pull-up = ; > + /* GPIO0 set as multifunction GPIO0 */ > + gpio_pin { > + pinmux = ; > }; > - }; > - An example of using si unit resistance value(ohm): > - &pio { > - mediatek,rsel_resistance_in_si_unit; > - } > - pincontroller { > + /* GPIO8 set as multifunction SDA0 */ > i2c0_pin { > pinmux = ; > - bias-pull-up = <1000>; > }; > }; > - > - bias-disable: true > - > - output-high: true > - > - output-low: true > - > - input-enable: true > - > - input-disable: true > - > - input-schmitt-enable: true > - > - input-schmitt-disable: true > - > - required: > - - pinmux > - > - additionalProperties: false > + $ref: "pinmux-node.yaml" > + > + properties: > + pinmux: > + description: | > + Integer array, represents gpio pin number and mux setting. > + Supported pin number and mux varies for different SoCs, and are > + defined as macros in dt-bindings/pinctrl/-pinfunc.h > + directly. > + > + drive-strength: > + enum: [2, 4, 6, 8, 10, 12, 14, 16] > + > + bias-pull-down: > + description: | > + For pull down type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & > + "MTK_PUPD_SET_R1R0_11" define in mt8195. > + For pull down type is RSEL, it can add RSEL define & resistance > + value(ohm) to set different resistance by identifying property > + "mediatek,rsel_resistance_in_si_unit". > + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" > + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" > + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > + define in mt8195. It can also support resistance value(ohm) > + "75000" & "5000" in mt8195. > + oneOf: > + - enum: [100, 101, 102, 103] > + - description: mt8195 pull down PUPD/R0/R1 type define value. > + - enum: [200, 201, 202, 203, 204, 205, 206, 207] > + - description: mt8195 pull down RSEL type define value. > + - enum: [75000, 5000] > + - description: mt8195 pull down RSEL type si unit value(ohm). > + > + An example of using RSEL define: > + pincontroller { > + i2c0_pin { > + pinmux = ; > + bias-pull-down = ; Isn't this now out of date? > + }; > + }; > + An example of using si unit resistance value(ohm): > + &pio { > + mediatek,rsel_resistance_in_si_unit; > + } > + pincontroller { > + i2c0_pin { > + pinmux = ; > + bias-pull-down = <75000>; > + }; > + }; > + > + bias-pull-up: > + description: | > + For pull up type is normal, it don't need add RSEL & R1R0 define > + and resistance value. > + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to > + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & > + "MTK_PUPD_SET_R1R0_11" define in mt8195. > + For pull up type is RSEL, it can add RSEL define & resistance > + value(ohm) to set different resistance by identifying property > + "mediatek,rsel_resistance_in_si_unit". > + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" > + & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" > + & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" > + define in mt8195. It can also support resistance value(ohm) > + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & > + "75000" in mt8195. > + oneOf: > + - enum: [100, 101, 102, 103] > + - description: mt8195 pull up PUPD/R0/R1 type define value. > + - enum: [200, 201, 202, 203, 204, 205, 206, 207] > + - description: mt8195 pull up RSEL type define value. > + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000] > + - description: mt8195 pull up RSEL type si unit value(ohm). > + An example of using RSEL define: > + pincontroller { > + i2c0_pin { > + pinmux = ; > + bias-pull-up = ; > + }; > + }; > + An example of using si unit resistance value(ohm): > + &pio { > + mediatek,rsel_resistance_in_si_unit; > + } > + pincontroller { > + i2c0_pin { > + pinmux = ; > + bias-pull-up = <1000>; > + }; > + }; > + > + bias-disable: true > + > + output-high: true > + > + output-low: true > + > + input-enable: true > + > + input-disable: true > + > + input-schmitt-enable: true > + > + input-schmitt-disable: true > + > + required: > + - pinmux > > required: > - compatible > @@ -201,30 +211,33 @@ additionalProperties: false > > examples: > - | > - #include > - #include > - pio: pinctrl@10005000 { > - compatible = "mediatek,mt8195-pinctrl"; > - reg = <0x10005000 0x1000>, > - <0x11d10000 0x1000>, > - <0x11d30000 0x1000>, > - <0x11d40000 0x1000>, > - <0x11e20000 0x1000>, > - <0x11eb0000 0x1000>, > - <0x11f40000 0x1000>, > - <0x1000b000 0x1000>; > - reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", > - "iocfg_br", "iocfg_lm", "iocfg_rb", > - "iocfg_tl", "eint"; > - gpio-controller; > - #gpio-cells = <2>; > - gpio-ranges = <&pio 0 0 144>; > - interrupt-controller; > - interrupts = ; > - #interrupt-cells = <2>; > - > - pio-pins { > - pinmux = ; > - output-low; > - }; > - }; > + #include > + #include > + # > + pio: pinctrl@10005000 { > + compatible = "mediatek,mt8195-pinctrl"; > + reg = <0x10005000 0x1000>, > + <0x11d10000 0x1000>, > + <0x11d30000 0x1000>, > + <0x11d40000 0x1000>, > + <0x11e20000 0x1000>, > + <0x11eb0000 0x1000>, > + <0x11f40000 0x1000>, > + <0x1000b000 0x1000>; > + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", > + "iocfg_br", "iocfg_lm", "iocfg_rb", > + "iocfg_tl", "eint"; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&pio 0 0 144>; > + interrupt-controller; > + interrupts = ; > + #interrupt-cells = <2>; > + > + pio-pins { > + pins_bus { Don't use '_' in node names. > + pinmux = ; > + output-low; > + }; > + }; > + }; > -- > 2.18.0 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel