[PATCH 2/2] dt-bindings: Use new video interface bus type macros in examples

Laurent Pinchart
2022-02-27T20:35:43Z

Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT binding examples.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
.../devicetree/bindings/display/bridge/analogix,anx7625.yaml | 3 ++-
Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 ++-
Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml | 3 ++-
.../devicetree/bindings/media/marvell,mmp2-ccic.yaml | 3 ++-
Documentation/devicetree/bindings/media/microchip,xisc.yaml | 3 ++-
Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml | 4 +++-
6 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 1d3e88daca04..0e6c43a29491 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -130,6 +130,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>

i2c0 {
#address-cells = <1>;
@@ -155,7 +156,7 @@ examples:
reg = <0>;
anx7625_in: endpoint {
remote-endpoint = <&mipi_dsi>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
data-lanes = <0 1 2 3>;
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index 39395ea8c318..edde4201116f 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -104,6 +104,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>

i2c2 {
#address-cells = <1>;
@@ -124,7 +125,7 @@ examples:
remote-endpoint = <&csi2a_ep>;
link-frequencies = /bits/ 64 <199200000 210000000
499200000>;
- bus-type = <4>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 44529425ce3a..161e6d598e1c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -105,6 +105,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>

i2c0 {
#address-cells = <1>;
@@ -118,7 +119,7 @@ examples:

port {
ov772x_0: endpoint {
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
vsync-active = <0>;
hsync-active = <0>;
pclk-sample = <0>;
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index b39b84c5f012..0e3478551e13 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -68,6 +68,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/marvell,mmp2.h>
+ #include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/power/marvell,mmp2.h>

camera@d420a000 {
@@ -83,7 +84,7 @@ examples:
port {
camera0_0: endpoint {
remote-endpoint = <&ov7670_0>;
- bus-type = <5>; /* Parallel */
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
hsync-active = <1>; /* Active high */
vsync-active = <1>; /* Active high */
pclk-sample = <0>; /* Falling */
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 086e1430af4f..d13d16c710e2 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -106,6 +106,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/media/video-interfaces.h>

xisc: xisc@e1408000 {
compatible = "microchip,sama7g5-isc";
@@ -118,7 +119,7 @@ examples:

port {
xisc_in: endpoint {
- bus-type = <5>; /* Parallel */
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
remote-endpoint = <&csi2dc_out>;
hsync-active = <1>;
vsync-active = <1>;
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 9c1262a276b5..285c6075950a 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -90,7 +90,9 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/media/video-interfaces.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
+ #
dcmi: dcmi@4c006000 {
compatible = "st,stm32-dcmi";
reg = <0x4c006000 0x400>;
@@ -104,7 +106,7 @@ examples:
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
- bus-type = <5>;
+ bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;