From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 3/3] clk: imx8mp: remove SYS PLL 1/2 clock gates
Date: Fri, 25 Feb 2022 16:35:13 +0200 [thread overview]
Message-ID: <YhjpIbIVf7DQh/Ja@abelvesa> (raw)
In-Reply-To: <20220225081733.2294166-4-peng.fan@oss.nxp.com>
On 22-02-25 16:17:33, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Remove the PLL 1/2 gates as it make AMP clock management harder without
> obvious benifit.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/clk/imx/clk-imx8mp.c | 48 ++++++++++++------------------------
> 1 file changed, 16 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index f23b92906d3b..18f5b7c3ca9d 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -480,44 +480,28 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
> hws[IMX8MP_ARM_PLL_OUT] = imx_clk_hw_gate("arm_pll_out", "arm_pll_bypass", anatop_base + 0x84, 11);
> hws[IMX8MP_SYS_PLL3_OUT] = imx_clk_hw_gate("sys_pll3_out", "sys_pll3_bypass", anatop_base + 0x114, 11);
>
> - hws[IMX8MP_SYS_PLL1_40M_CG] = imx_clk_hw_gate("sys_pll1_40m_cg", "sys_pll1_bypass", anatop_base + 0x94, 27);
Hmm, isn't there a chance that u-boot might gate these? Then, in kernel
you won't have a way to ungate them, leaving the consumers hanging.
> - hws[IMX8MP_SYS_PLL1_80M_CG] = imx_clk_hw_gate("sys_pll1_80m_cg", "sys_pll1_bypass", anatop_base + 0x94, 25);
> - hws[IMX8MP_SYS_PLL1_100M_CG] = imx_clk_hw_gate("sys_pll1_100m_cg", "sys_pll1_bypass", anatop_base + 0x94, 23);
> - hws[IMX8MP_SYS_PLL1_133M_CG] = imx_clk_hw_gate("sys_pll1_133m_cg", "sys_pll1_bypass", anatop_base + 0x94, 21);
> - hws[IMX8MP_SYS_PLL1_160M_CG] = imx_clk_hw_gate("sys_pll1_160m_cg", "sys_pll1_bypass", anatop_base + 0x94, 19);
> - hws[IMX8MP_SYS_PLL1_200M_CG] = imx_clk_hw_gate("sys_pll1_200m_cg", "sys_pll1_bypass", anatop_base + 0x94, 17);
> - hws[IMX8MP_SYS_PLL1_266M_CG] = imx_clk_hw_gate("sys_pll1_266m_cg", "sys_pll1_bypass", anatop_base + 0x94, 15);
> - hws[IMX8MP_SYS_PLL1_400M_CG] = imx_clk_hw_gate("sys_pll1_400m_cg", "sys_pll1_bypass", anatop_base + 0x94, 13);
> hws[IMX8MP_SYS_PLL1_OUT] = imx_clk_hw_gate("sys_pll1_out", "sys_pll1_bypass", anatop_base + 0x94, 11);
>
> - hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_40m_cg", 1, 20);
> - hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_80m_cg", 1, 10);
> - hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_100m_cg", 1, 8);
> - hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_133m_cg", 1, 6);
> - hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_160m_cg", 1, 5);
> - hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_200m_cg", 1, 4);
> - hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_266m_cg", 1, 3);
> - hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_400m_cg", 1, 2);
> + hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_out", 1, 20);
> + hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_out", 1, 10);
> + hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_out", 1, 8);
> + hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_out", 1, 6);
> + hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_out", 1, 5);
> + hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_out", 1, 4);
> + hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_out", 1, 3);
> + hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_out", 1, 2);
> hws[IMX8MP_SYS_PLL1_800M] = imx_clk_hw_fixed_factor("sys_pll1_800m", "sys_pll1_out", 1, 1);
>
> - hws[IMX8MP_SYS_PLL2_50M_CG] = imx_clk_hw_gate("sys_pll2_50m_cg", "sys_pll2_bypass", anatop_base + 0x104, 27);
> - hws[IMX8MP_SYS_PLL2_100M_CG] = imx_clk_hw_gate("sys_pll2_100m_cg", "sys_pll2_bypass", anatop_base + 0x104, 25);
> - hws[IMX8MP_SYS_PLL2_125M_CG] = imx_clk_hw_gate("sys_pll2_125m_cg", "sys_pll2_bypass", anatop_base + 0x104, 23);
> - hws[IMX8MP_SYS_PLL2_166M_CG] = imx_clk_hw_gate("sys_pll2_166m_cg", "sys_pll2_bypass", anatop_base + 0x104, 21);
> - hws[IMX8MP_SYS_PLL2_200M_CG] = imx_clk_hw_gate("sys_pll2_200m_cg", "sys_pll2_bypass", anatop_base + 0x104, 19);
> - hws[IMX8MP_SYS_PLL2_250M_CG] = imx_clk_hw_gate("sys_pll2_250m_cg", "sys_pll2_bypass", anatop_base + 0x104, 17);
> - hws[IMX8MP_SYS_PLL2_333M_CG] = imx_clk_hw_gate("sys_pll2_333m_cg", "sys_pll2_bypass", anatop_base + 0x104, 15);
> - hws[IMX8MP_SYS_PLL2_500M_CG] = imx_clk_hw_gate("sys_pll2_500m_cg", "sys_pll2_bypass", anatop_base + 0x104, 13);
> hws[IMX8MP_SYS_PLL2_OUT] = imx_clk_hw_gate("sys_pll2_out", "sys_pll2_bypass", anatop_base + 0x104, 11);
>
> - hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_50m_cg", 1, 20);
> - hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_100m_cg", 1, 10);
> - hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_125m_cg", 1, 8);
> - hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_166m_cg", 1, 6);
> - hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_200m_cg", 1, 5);
> - hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_250m_cg", 1, 4);
> - hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_333m_cg", 1, 3);
> - hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
> + hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_out", 1, 20);
> + hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_out", 1, 10);
> + hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_out", 1, 8);
> + hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_out", 1, 6);
> + hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_out", 1, 5);
> + hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_out", 1, 4);
> + hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_out", 1, 3);
> + hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2);
> hws[IMX8MP_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
>
> hws[IMX8MP_CLK_A53_DIV] = imx8m_clk_hw_composite_core("arm_a53_div", imx8mp_a53_sels, ccm_base + 0x8000);
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-25 14:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 8:17 [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Peng Fan (OSS)
2022-02-25 8:17 ` [PATCH 1/3] clk: imx8mm: remove SYS PLL 1/2 clock gates Peng Fan (OSS)
2022-02-25 8:17 ` [PATCH 2/3] clk: imx8mn: " Peng Fan (OSS)
2022-02-25 8:17 ` [PATCH 3/3] clk: imx8mp: " Peng Fan (OSS)
2022-02-25 14:35 ` Abel Vesa [this message]
2022-02-28 0:39 ` Peng Fan
2022-02-28 12:23 ` Abel Vesa
2022-02-28 12:23 ` [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Abel Vesa
2022-03-04 8:50 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YhjpIbIVf7DQh/Ja@abelvesa \
--to=abel.vesa@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).