linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: John Keeping <john@metanate.com>
To: Corentin Labbe <clabbe@baylibre.com>
Cc: heiko@sntech.de, herbert@gondor.apana.org.au, robh+dt@kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-rockchip@lists.infradead.org
Subject: Re: [PATCH v2 15/18] crypto: rockchip: introduce PM
Date: Thu, 3 Mar 2022 12:57:03 +0000	[thread overview]
Message-ID: <YiC7Hxm0epcAcHen@donbot> (raw)
In-Reply-To: <20220302211113.4003816-16-clabbe@baylibre.com>

On Wed, Mar 02, 2022 at 09:11:10PM +0000, Corentin Labbe wrote:
> Add runtime PM support for rockchip crypto.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  drivers/crypto/Kconfig                        |  1 +
>  drivers/crypto/rockchip/rk3288_crypto.c       | 50 ++++++++++++++++++-
>  drivers/crypto/rockchip/rk3288_crypto.h       |  1 +
>  drivers/crypto/rockchip/rk3288_crypto_ahash.c | 11 ++++
>  .../crypto/rockchip/rk3288_crypto_skcipher.c  | 10 ++++
>  5 files changed, 71 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 04c8e332c5a1..685631a5cbea 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -784,6 +784,7 @@ config CRYPTO_DEV_IMGTEC_HASH
>  config CRYPTO_DEV_ROCKCHIP
>  	tristate "Rockchip's Cryptographic Engine driver"
>  	depends on OF && ARCH_ROCKCHIP
> +	depends on PM

Does this need to depend on PM?  If you enable the clock in _probe then
use pm_runtime_put_autosuspend() the no-op helpers when !PM will mean
this works whether PM is enabled or not.

>  	select CRYPTO_AES
>  	select CRYPTO_ENGINE
>  	select CRYPTO_LIB_DES
> diff --git a/drivers/crypto/rockchip/rk3288_crypto.c b/drivers/crypto/rockchip/rk3288_crypto.c
> index cd0755731cf7..ba56f8ff97c3 100644
> --- a/drivers/crypto/rockchip/rk3288_crypto.c
> +++ b/drivers/crypto/rockchip/rk3288_crypto.c
> @@ -57,6 +57,48 @@ static void rk_crypto_disable_clk(struct rk_crypto_info *dev)
>  	clk_disable_unprepare(dev->sclk);
>  }
>  
> +/*
> + * Power management strategy: The device is suspended unless a TFM exists for
> + * one of the algorithms proposed by this driver.
> + */
> +static int rk_crypto_pm_suspend(struct device *dev)
> +{
> +	struct rk_crypto_info *rkdev = dev_get_drvdata(dev);
> +
> +	rk_crypto_disable_clk(rkdev);
> +	return 0;
> +}
> +
> +static int rk_crypto_pm_resume(struct device *dev)
> +{
> +	struct rk_crypto_info *rkdev = dev_get_drvdata(dev);
> +
> +	return rk_crypto_enable_clk(rkdev);
> +}
> +
> +static const struct dev_pm_ops rk_crypto_pm_ops = {
> +	SET_RUNTIME_PM_OPS(rk_crypto_pm_suspend, rk_crypto_pm_resume, NULL)
> +};
> +
> +static int rk_crypto_pm_init(struct rk_crypto_info *rkdev)
> +{
> +	int err;
> +
> +	pm_runtime_use_autosuspend(rkdev->dev);
> +	pm_runtime_set_autosuspend_delay(rkdev->dev, 2000);
> +
> +	err = pm_runtime_set_suspended(rkdev->dev);
> +	if (err)
> +		return err;
> +	pm_runtime_enable(rkdev->dev);
> +	return err;
> +}
> +
> +static void rk_crypto_pm_exit(struct rk_crypto_info *rkdev)
> +{
> +	pm_runtime_disable(rkdev->dev);
> +}
> +
>  static irqreturn_t rk_crypto_irq_handle(int irq, void *dev_id)
>  {
>  	struct rk_crypto_info *dev  = platform_get_drvdata(dev_id);
> @@ -259,7 +301,9 @@ static int rk_crypto_probe(struct platform_device *pdev)
>  	crypto_engine_start(crypto_info->engine);
>  	init_completion(&crypto_info->complete);
>  
> -	rk_crypto_enable_clk(crypto_info);
> +	err = rk_crypto_pm_init(crypto_info);
> +	if (err)
> +		goto err_crypto;
>  
>  	err = rk_crypto_register(crypto_info);
>  	if (err) {
> @@ -280,6 +324,7 @@ static int rk_crypto_probe(struct platform_device *pdev)
>  	return 0;
>  
>  err_register_alg:
> +	rk_crypto_pm_exit(crypto_info);
>  err_crypto:
>  	dev_err(dev, "Crypto Accelerator not successfully registered\n");
>  	return err;
> @@ -293,7 +338,7 @@ static int rk_crypto_remove(struct platform_device *pdev)
>  	debugfs_remove_recursive(crypto_tmp->dbgfs_dir);
>  #endif
>  	rk_crypto_unregister();
> -	rk_crypto_disable_clk(crypto_tmp);
> +	rk_crypto_pm_exit(crypto_tmp);
>  	return 0;
>  }
>  
> @@ -302,6 +347,7 @@ static struct platform_driver crypto_driver = {
>  	.remove		= rk_crypto_remove,
>  	.driver		= {
>  		.name	= "rk3288-crypto",
> +		.pm		= &rk_crypto_pm_ops,
>  		.of_match_table	= crypto_of_id_table,
>  	},
>  };
> diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
> index e2a6d735f2e2..06b2d9f52a80 100644
> --- a/drivers/crypto/rockchip/rk3288_crypto.h
> +++ b/drivers/crypto/rockchip/rk3288_crypto.h
> @@ -9,6 +9,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/debugfs.h>
>  #include <linux/delay.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/scatterlist.h>
>  #include <crypto/engine.h>
>  #include <crypto/internal/hash.h>
> diff --git a/drivers/crypto/rockchip/rk3288_crypto_ahash.c b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
> index 8856c6226be6..a41e21c7141b 100644
> --- a/drivers/crypto/rockchip/rk3288_crypto_ahash.c
> +++ b/drivers/crypto/rockchip/rk3288_crypto_ahash.c
> @@ -328,6 +328,7 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
>  	struct ahash_alg *alg = __crypto_ahash_alg(tfm->__crt_alg);
>  
>  	const char *alg_name = crypto_tfm_alg_name(tfm);
> +	int err;
>  
>  	algt = container_of(alg, struct rk_crypto_tmp, alg.hash);
>  
> @@ -349,7 +350,16 @@ static int rk_cra_hash_init(struct crypto_tfm *tfm)
>  	tctx->enginectx.op.prepare_request = rk_hash_prepare;
>  	tctx->enginectx.op.unprepare_request = rk_hash_unprepare;
>  
> +	err = pm_runtime_get_sync(tctx->dev->dev);

pm_runtime_resume_and_get() ?  The error handling is nicer with that.

> +	if (err < 0)
> +		goto error_pm;
> +
>  	return 0;
> +error_pm:
> +	pm_runtime_put_noidle(tctx->dev->dev);
> +	crypto_free_ahash(tctx->fallback_tfm);
> +
> +	return err;
>  }
>  
>  static void rk_cra_hash_exit(struct crypto_tfm *tfm)
> @@ -357,6 +367,7 @@ static void rk_cra_hash_exit(struct crypto_tfm *tfm)
>  	struct rk_ahash_ctx *tctx = crypto_tfm_ctx(tfm);
>  
>  	crypto_free_ahash(tctx->fallback_tfm);
> +	pm_runtime_put_sync_suspend(tctx->dev->dev);

Why use sync_suspend here?  Could this be pm_runtime_put_autosuspend()?

>  }
>  
>  struct rk_crypto_tmp rk_ahash_sha1 = {
> diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
> index a8cfb520eaf8..55efda6ea3e7 100644
> --- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
> +++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
> @@ -458,6 +458,7 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
>  	struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
>  	const char *name = crypto_tfm_alg_name(&tfm->base);
>  	struct rk_crypto_tmp *algt;
> +	int err;
>  
>  	algt = container_of(alg, struct rk_crypto_tmp, alg.skcipher);
>  
> @@ -475,7 +476,15 @@ static int rk_ablk_init_tfm(struct crypto_skcipher *tfm)
>  
>  	ctx->enginectx.op.do_one_request = rk_cipher_run;
>  
> +	err = pm_runtime_get_sync(ctx->dev->dev);

Another place for pm_runtime_resume_and_get() ?

> +	if (err < 0)
> +		goto error_pm;
> +
>  	return 0;
> +error_pm:
> +	pm_runtime_put_noidle(ctx->dev->dev);
> +	crypto_free_skcipher(ctx->fallback_tfm);
> +	return err;
>  }
>  
>  static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
> @@ -484,6 +493,7 @@ static void rk_ablk_exit_tfm(struct crypto_skcipher *tfm)
>  
>  	memzero_explicit(ctx->key, ctx->keylen);
>  	crypto_free_skcipher(ctx->fallback_tfm);
> +	pm_runtime_put_sync_suspend(ctx->dev->dev);

Again, can this be pm_runtime_put_autosuspend() ?

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-03-03 12:58 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-02 21:10 [PATCH v2 00/18] crypto: rockchip: permit to pass self-tests Corentin Labbe
2022-03-02 21:10 ` [PATCH v2 01/18] crypto: rockchip: use dev_err for error message about interrupt Corentin Labbe
2022-03-02 21:10 ` [PATCH v2 02/18] crypto: rockchip: do not use uninit variable Corentin Labbe
2022-03-02 21:10 ` [PATCH v2 03/18] crypto: rockchip: do not do custom power management Corentin Labbe
2022-03-02 21:10 ` [PATCH v2 04/18] crypto: rockchip: fix privete/private typo Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 05/18] crypto: rockchip: do not store mode globally Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 06/18] crypto: rockchip: add fallback for cipher Corentin Labbe
2022-03-03 14:21   ` John Keeping
2022-03-03 19:54     ` LABBE Corentin
2022-03-02 21:11 ` [PATCH v2 07/18] crypto: rockchip: add fallback for ahash Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 08/18] crypto: rockchip: better handle cipher key Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 09/18] crypto: rockchip: remove non-aligned handling Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 10/18] crypto: rockchip: rework by using crypto_engine Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 11/18] crypto: rockhip: do not handle dma clock Corentin Labbe
2022-03-04 15:01   ` Johan Jonker
2022-03-10 14:45     ` LABBE Corentin
2022-03-10 17:52       ` Johan Jonker
2022-03-15 11:45         ` LABBE Corentin
2022-03-02 21:11 ` [PATCH v2 12/18] ARM: dts: rk3288: crypto do not need " Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 13/18] crypto: rockchip: rewrite type Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 14/18] crypto: rockchip: add debugfs Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 15/18] crypto: rockchip: introduce PM Corentin Labbe
2022-03-03 12:57   ` John Keeping [this message]
2022-03-02 21:11 ` [PATCH v2 16/18] arm64: dts: rockchip: add rk3328 crypto node Corentin Labbe
2022-03-02 21:11 ` [PATCH v2 17/18] dt-bindings: crypto: convert rockchip-crypto to yaml Corentin Labbe
2022-03-03 13:44   ` Rob Herring
2022-03-03 19:40     ` LABBE Corentin
2022-03-08  0:52   ` Rob Herring
2022-03-02 21:11 ` [PATCH v2 18/18] crypto: rockchip: add myself as maintainer Corentin Labbe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YiC7Hxm0epcAcHen@donbot \
    --to=john@metanate.com \
    --cc=clabbe@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).